NHR WZB-05ET User manual
1
WZB-05ET User's Manual
WZB-05ET w/ DHCP User's Manual
Ver. 1.00
Copyright@2011 Nietzsche Enterprise Co., Ltd. All rights reserved.
Nietzsche Enterprise reserves the right to make changes and improvements to its products without
notice.
Contact information: E-Mail: service@nhr.com.tw; Website: www.nhr.com.tw
INDEX
1. Open web page.....................................................................................................................2
2. Login.....................................................................................................................................2
3. Change username & password.............................................................................................3
4. Change network setting ........................................................................................................3
5. Reset to default.....................................................................................................................5
2
WZB-05ET User's Manual
1. Open web page
1.1. The WZB-05ET default IP configuration is static IP and IP address = 192.168.1.200
1.2. Connect the WZB-05ET to the pc you want use to configure
1.3. Change the pc’s network setting to same network section, for example 192.168.1.201
1.4. Open any web browser
1.5. Type the WZB-05ET IP address to open web page
1.6.
2. Login
2.1. Click the or , if not login before, screen will pop up log
in window.
2.2. The default username is "admin", password is "admin".
2.3.
3
WZB-05ET User's Manual
3. Change username & password
3.1. Click into setting page
3.2. Type new username, New Password1 & New Password2(Confirm)
3.3. Click "Save" to proceed
3.4.
4. Change network setting
4.1 Click into the setting page.
4.2 The default IP configure is Static IP = 192.168.1.200
4.3 Check if you want enable DHCP function, then the Static IP configuration area
will be disabled.
4.4 The WZB-05ET default setting is server mode, port is 10010.
4.5 Disabled , if you want to change the WZB-05ET into client mode, if
you change to client mode, the Remote Host will enable and user can change it.
4.6 Click "Save" if you want complete and apply the change.
4.7 After save the WZB-05ET will restart automatically .
4
WZB-05ET User's Manual
4.8
4.9
5
WZB-05ET User's Manual
5. Reset to default
5.1. If you forget the ID and password, and need to reset, please click the button 1 second to reset to
default.
5.2. The IP address default setting of WZB-05ET is Static IP = 192.168.1.200
5.3.
Table of contents
