QUICK START GUIDE
NICE1 COLD + COMPRESSION THERAPY SYSTEM
CONSULT A HEALTHCARE PROFESSIONAL BEFORE USING NICE1
•Connect the power cord to the external
power supply.
•Plug the circular connector into the
back of the Cooling Unit. You will hear a
click when properly connected.
•Plug the power cord into the wall outlet.
S T E P 1
Turn onthe power switch on the back of the
device. The touch screen will illuminate and
display the “Nice” logo. Press Start. Review
the checklist on the touch screen. Confirm
and press NEXT.
S T E P 4
Choose a MANUAL time setting of 5– 40
minutesfor a single therapy session OR choose
a PRESET PROGRAM for multiple sessions and
press NEXT. Note: Preset timing programs are
on a 10-cycle memory.
STEP 3
Select desiredCOMPRESSION LEVEL and
COMPRESSION TYPE and pressNEXT.
S T E P 2
Select desired COLD LEVEL and press NEXT.
(level 5 isthe coldest setting).
Cold settings are as follows:
Level 1= 58F (14.4C) Level 4 = 46F (7.7C)
Level 2= 54F (12.4C) Level 5 = 42F (5.5C)
Level 3= 50F (10C)
S T E P 5
Review and confirmyour settings by pressing
START or press BACK to change the settings.
STEP 6
During your therapy session you can change
the cold or compression settings simply by
pressing 1 – 5 or HIGH, MED or LOW. To Dim,
Press Dim switch, to brighten — touch screen.
•Connect the hose to the control unit. You
will hear a click when properly connected.
•Place the wrap on the appropriate
body part. Secure with Velcro strips.
• Connect the hose to the wrap. You will
hear a click when properly connected.
