Night & Day Furniture Rosebud Daybed User manual

Leave the top
hole empty!
Arm
20mm Bolt
20mm Bolt
Inside of Arm
Leave the top
hole empty!
20mm Bolt
20mm Bolt
Leave the top
hole empty!
20mm Bolts
x 12
40mm Bolts
x 8
30mm
Wood Screws
x 16
Allen Key
x 1
Page 1 of 2
0907
Rosebud Daybed
Hardware in this Box.
1B
One pair of Daybed Arms in this Box:
1A
Fit Bolts loosely to Arms.
1C
Note: The back legs
have extra holes to
fix the Back Panel
Left Hand
Insert the 20mm Bolts into the bottom
two holes on the Arms. Screw in
about five turns only.
Right Hand
The Bolts
should be
left sticking
out like this!
ASSEMBLY
INSTRUCTIONS
TM

TM
Metal
Plates
Stretcher
20mm
Bolts
20mm
Bolt
Stretcher
Note: The back legs
have extra holes to
fix the Back Panel
Fix the Rails to the Daybed Arms.
2A
Page 2 of 2
Use the Wood Screws at the
end of each loose Slats
(Total 16.) An electric
screwdiver will make
this much easier.
40mm Bolts
Lay the slats out between the Rails.
The end slats of each set is
fixed with the 40mm Bolts.
Carefully hook
the Stretchers
onto the Bolts
on the Arms.
Note: Dont fully tighthen the
Bolts until the whole frame is
put together.
Fit the Slats between the Rails.
2B
Fix the To p Bolt
on the Stretchers.
1007
Rosebud Daybed ASSEMBLY
INSTRUCTIONS
40mm Bolts