Night & Day Furniture SHOE FITTINGS GOLD SEA HORSE User manual

One Pair of Shoe Fittings Arms:
1A
Hardware in this Box:
1B
Page 1 of 6
1C
Outside View Inside View
GoldAssembly Instructions SHOE FITTINGSTM
SHOEFITTINGSTM Protected by US Patent #6,715,166. Other Patents Pending.
Shadow Arms
(formerly Moonshadow) SF 0206
Patent No.: US 6,457,923
ThumNut™ x 4 pieces Long Bolts (130mm)
x 4 pieces Wood Buttons x 4 pieces Allen Key x 1 piece
featuring the Rubber TM
Roller Guide
Sea Horse
TM

2A
Fit Wood Buttons into Bolt Holes.
2B
Page 2 of 6
Tighten all Bolts. Push fit or lightly
tap the Wood Buttons into the
Bolt holes on the Arms.
Using Long Bolts and ThumNuts™ provided with the
Arms, attach the Arms to the Stretchers as shown.
The raised side of the stretcher should face upwards.
Attach the Stretchers to the Arms.
GoldAssembly Instructions SHOE FITTINGSTM
Shadow Arms
(formerly Moonshadow) SF 0206
ThumNuts™
ThumNuts™
Long Bolt
Long
Bolt Long
Bolt
Long Bolt
This way up.
Arm -Your style may be
different to that shown here
Arm
Be sure the holes are free of wood chips
and saw dust.
Allen Key
ThumNut™
Bolt and ThumNut™ assembly.
Do not force the Bolt as you may strip the
thread. Be sure the thread is properly started.
Stretcher
Long Bolt
Wood
Button Wood Button

Assembly 1: Fit the Back Deck
Page 3 of 6
Carefully lift the Back Deck into position. Place the Bottom Rollers onto the
3A Rest the Top Rollers againt the Leg. 3B
Gently lift the Back Deck so the Top Roller goes inside the Roller Guide.
3C Gently Lower the Back down until it
is lying flat.
3D
Chair • Love seat • Full • Queen
From the Back: Gently ease
the Top Rollers into position. From the Back: Lower the Back Deck.
The Bottom Roller
should be sitting on
the Rubber Sea Horse.
It will help to
pull on the Bottom
of the Back Deck.
Use 2 People!
Please Note:
back of the Rubber Sea Horse.
GoldAssembly Instructions
SF 0404
SHOE FITTINGSTM
Very Important: Make sure the Top
Rollers are fully inside on both sides!
Roller Guide
Back Leg
of Arm Final Position
of Top Roller

Hook the Seat Deck onto the Snapper.
4A Pull the Seat over the "Snap Point." 4B
Push down on the Seat, and the
Back will Lift.
4C This is the Lounge Position. 4D This is the Sofa Position. 4E
Page 4 of 6
Chair • Love seat • Full • Queen
Assembly 2: Fit the Seat Deck
Lift the Seat Deck in vertically, so the Pins
meet with the Rubber Snapper. The head of
the Snapper should fit between both Pins.
With the Top Pin
inside the notch on
the Rubber Snapper, put
your foot on the Back Deck
and pull the Seat over the "Snap Point"
Put your
foot here
You will need to Pull Hard.
Push the Seat
down further and the
Back will rise until it is
in the "Lounge Position"
Push the Seat
with your knee, to
convert to the Sofa Position
Push
Add Mattress and
Enjoy! See separate page
for Operating Instructions.
•The Top Pin - fits over the top,
•The Lower Pin - goes underneath.
Just remember:
Use 2 People!
Please Note:
GoldAssembly Instructions SHOE FITTINGSTM
SF 0404
- over the top
Bottom Pin Notch
Top Pin
Rubber
Snapper
- underneath

Use 2 People!
Please Note:
From the Back, lift out the Top Pin and ease the Seat Deck forward.
Push the Seat over the "Snap Point."From the Bed position, lift the Seat.
5A Lift the Seat all the way. 5B 5C
5D Lift the Seat clear of the frame. 5E
Disassembly 1: Removing the Seat
Page 5 of 6
Chair • Love seat • Full • Queen
You will need to Push Hard.
Lift from the front,
using both Handles.
Lift all the way until the
Top Pin drops into the
notch on the Rubber Snapper.
Lift and ease the Deck forward
Lift up so the Top Pin is out of
its notch in the Rubber Snapper.
Ease the Back Deck forward,
keeping it orientated vertically.
Be careful when lifting the
Seat Deck out, not to scratch
the Arms with the Rollers.
GoldAssembly Instructions SHOE FITTINGSTM
SF 0404
Top Pin
Notch
Rubber
Snapper
Rubber
Snapper

Lift the Back Deck up.
6A 6B Lift Back Deck so the Top Roller is clear of the Back Leg.
Push the Deck forward at the top.
6C Lift the Back away from the Arms. 6D Undo the Stretcher Bolts. 6E
Page 6 of 6
Chair • Love seat • Full • Queen
Disassembly 2: Removing the Back
Lift from the Back Lift from the Back
Be careful when lifting the
Back Deck out, not to scratch
the Arms with the Rollers.
Use the Allen Key
to undo the Bolts
on the Arms.
Use 2 People!
Please Note:
GoldAssembly Instructions SHOE FITTINGSTM
SF 0404
Roller Guide
Back Leg
of Arm
Final Position
of Top Roller
Very Important: Make sure the Top
Rollers are fully outside on both sides!