Niles APC-2 User manual

SPECIFICATIONS SHEET
APC-2
AUTOMATED SWITCHING SYSTEM
• Gives virtually any A/V component a switched AC outlet
• Current Sense-Triggered
•Individually boxed
Current Sensing Outlet Switcher

AUTOMATED SWITCHING SYSTEMS
NILES AUDIO CORPORATION 12331 S.W. 130 Street, Miami, FL 33186 Tel: [phone] – www.nilesaudio.com NAAPC2PDF
FEATURES
■Three AC outlets—one current sensing (requires min. 30W current draw differential between on/off
for reliable sensing), one switched, one unswitched - 1,500W maximum (all outlets combined)
■APC-2 is activated by current sensing outlet or 12Volt DC signal (100mA minimum)
■12Volt control output for activating other Niles devices such as the SPK-1, AVS-2, AC-3, or RFS-1
■N.O. (normally open) and N.C. (normally closed) relay contacts for controlling other devices such as
electric screens, motorized lifts, drapes, etc.
■Relay contacts rated at one amp, 30V max. AC/DC
SPECIFICATIONS
■Dimensions: 8" wide x 2-3/4" high x 7" deep
Warranty: Two-year limited
120Volt AC Power Switching System
APC-2
Stock Number
FG00254
Product Detail
Use a TV to power ON a surround sound system with the current sensing outlet of the APC-2.
TURN ON THE TV TO TURN
ON THE SURROUND SYSTEM
AC POWER STRIP
NOT SUPPLIED
AC LINE CORD
AC
LINE
CORD
APC-2
SURROUND SOUND PROCESSOR
FRONT AMPLIFIER
CENTER AMPLIFIER
REAR AMPLIFIER
UNSWITCHED
AC OUTLET
TV