Nilfisk-Advance P 130.1 User manual

Nilsk P 130.1/150.1/160.1
Nilsk P 130.1/150.1/160.1 X-TRA
128303204 c
User Manual

Printed in China
Copyright © 2010 Nilfisk, Division of Nilfisk-Advance A/S

3
We congratulate you on your new Nilfisk High Pressure Washer
We are confident that the new high pressure washer of Nilfisk will justify your expectations of quick and
effective cleaning. Now you have a cleaning device which will facilitate your future cleaning tasks and make
them more effective. Many tasks which were previously difficult, can now be solved in a few minutes and
with a much better result.
If, contrary to expectations, problems should arise which cannot be remedied by means of the information
in section 8.0, the Nilfisk service organization will be at your disposal.
Nilfisk is a global concern with a comprehensive knowledge within development and manufacturing of ef-
fi cient and environmentally friendly cleaning solutions. Our product range comprises cleaning solutions for
selected customer groups - from machines for domestic use to big industrial cleaning systems.
The expertise of Nilfisk is cleaning focusing the need of the customer. Our wish is that you as a custom-
ers should feel quite confident that the cleaning equipment you buy from us is the most efficient and that it
fulfils all of your expectations.
Best regards
Nilfisk
Division of Nilfisk-Advance A/S
Fields of application EN
Contents EN
Model survey (P 12 476)
The applications for this product are domestic clean-
ing jobs:
Car, motorbike, boat, caravan, trailer, patio/drive/
flagstones, woodwork, brickwork, barbecue,
garden furniture etc.
1. Electric cable
2. Start-/stop switch
3. Connection for high pressure hose (only PRO
130/150/160)
4. Connection for water (with filter)
5. High pressure hose
6. Spray gun with trigger (6a) and locking device
(6b)
7. Spray lance with bayonet socket
8. TORNADO®PR nozzle
9. POWERSPEED®nozzle
10. Needle for cleaning of nozzle
11. Detachable container for detergents
12. Dosing regulator for detergents
13. Pressure gauge (not available on model B)
14. Regulation of pressure / water volume (not
available on model B)
15. Hose reel (only PRO 130/150/160 X-TRA)
16. Hose storage (only PRO 130/150/160)
Specifications: See model tag of machine.
Sound pressure level measured in accordance with
ISO 3744, EEC Directive 2000/14/EEC:
P 130.1: LpA = 80 dB(A), LWA = 90 dB(A).
P 150.1: LpA = 80 dB(A), LWA = 93 dB(A).
P 160.1: LpA = 80 dB(A), LWA = 95 dB(A).
Hand/arm vibrations measured according to ISO
5349 is < 2.5 m/s2.
We reserve the right to alter the specifications.
1.0 Preparation .................................................... 4
2.0 Operating instructions.................................... 5
3.0 Accessories ................................................... 7
4.0 Maintenance .................................................. 8
5.0 Storage .......................................................... 8
6.0 Recycling the washer..................................... 8
7.0 Questions - and answers ............................... 8
8.0 Trouble shooting guide................................... 9
9.0 Warranty ..................................................... 10

4
1.0 Preparation EN
Extension cable
Extension cables should be of a watertight con-
struction and comply with the below-mentioned
requirements for length and cable dimensions.
1,5 mm² max 20 m
2,5 mm² max 30 m
• Cable connections should be kept dry and off the
ground.
• Always uncoil the extension cable completely to
avoid heat damage to the cable.
Water connection
Connect the high pressure washer by means of a
water hose to the water tap (pressure of inlet wa-
ter, max. 10 bar - temperature of inlet water, max.
60°C).You may use an ordinary ½" garden hose of
min. 10 m and max. 25 m. Attach the hose using
a quick connector. NOTE: Connection to the public
mains according to regulations.
This high pressure washer is only allowed
to be connected with the drinking water
mains, when an appropriate backflow
preventer has been installed, Type BA according to
EN 1717. The backflow preventer can be ordered
under number 106411177. The length of the hose
between the backflow preventer and the high pres-
sure washer must be at least 10 metres to absorb
possible pressure peaks (min diameter ½ inch).
Operation by suction (for example from a rainwater
vessel) is carried out without backflow preventer.
Recommended suction set: 126411387.
As soon as water has flown through the BA valve,
this water is not considered to be drinking water any
more.
IMPORTANT! Only use water without any impu-
rities. If there is a risk of running sand in the inlet
water (i.e. from your own well), a filter should be
mounted.
Safety precautions
• WARNING! High pressure jets can
be dangerous. Never direct the wa-
ter jet at persons, pets, live electri-
cal equipment or the machine itself.
• The operator and anyone in the im-
mediate vicinity of the site of clean-
ing should take action to protect
themselves from being struck by
debris dislodged during operation.
Wear goggles during operation.
Before starting up your high pressure washer, we
advise you to carefully read through this instruction
manual. Follow all instructions to minimize the risk
of injuries when using the machine.
Prior to operation
Before you start up your new machine for the first
time, you must mount the holder for the spray lance.
It is fixed at the top of the transport handle.
1. Insert the holder in the recess of the handle (see
illu.).
2. Fix the holder with the screw.
Mount water filter and water inlet connection (4).
PRO 130/150/160 X-TRA: Mount the handle for the
hose reel.
Before starting up your machine please check it
carefully for any defects. If you find any, do not start
up your machine and contact your Nilfisk distributor.
Especially check:
• The insulation of the electric cable should be
faultless and without any cracks. If the electric
cable is damaged, it should be replaced by an
authorized Nilfisk distributor.
Mains power connection
The following should be observed when connecting
the high pressure washer to the electric installation:
• Only connect the machine to an installation with
earth connection.
• The electric installation shall be made by a certi-
fied electrician.
• It is strongly recommended that the electric sup-
ply to this machine should include a residual
current device (GFCI).
1
2

5
Preparation EN
• Never try to clean clothes or footwear on yourself
or other persons.
• Do not let children or people who have not read
the instruction manual operate the machine.
• Never use the machine in an environment where
there could be a danger of explosion. If any doubt
arises, please contact the local authorities.
• It is not allowed to clean asbestos-containing
surfaces with high pressure.
Safety devices
Locking device on spray gun
The spray gun features a locking device (6b). When
the pawl is activated, the spray gun cannot be ope-
rated.
Thermal sensor:
A thermal sensor protects the motor against over-
loading. The machine will restart after a few minutes
when the thermal sensor has cooled.
Pressure safety device
An integrated hydraulic safety valve protects the
system from excessive pressure
Operating Instructions EN
High pressure
Low pressure
2.0 Operating Instructions
2.1 Operating facilities
• Start-/stop rotary switch (2).
• Spray gun (6) with trigger (6a) and locking device
(6b).
• Dosing regulator for detergents (12).
• Regulation of pressure / water volume (14). (not
available on model B)
2.2 Connection
1. PRO 130/150/160: Attach the high pressure hose
(5) to the connection for high pressure hose (3).
Only use one extension hose of max. 7 m.
PRO 130/150/160 X-TRA: Unwind the high pres-
sure hose completely.
2. Attach the nipple of the high pressure hose to the
spray gun quick coupling.
3. Mount the nozzle or any other equipment you
want to use.
4. Connect the machine to the water and power
supplies.
2.3 Start
1. Check that the machine is in vertical position.
2. Activate the trigger of the spray gun (6a) and let
the water run out until any air has escaped from
the inlet hose.
3. Turn the start/stop switch (2) to pos. I.
2.4 Operation
1. Always hold the spray lance
firmly with both hands! The spray
lance is affected by a longitudinal
thrust of up to 16.4 N when the high
pressure washer is operated.
2. Point the nozzle at the ground!
3. Activate the trigger of the spray gun (6a).
4. Always adjust the distance and thus the pres-
sure of the nozzle to the surface which is to be
cleaned. NOTE: The pressure can be regulated
on the TORNADO®PR nozzle or the button for
regulation of pressure / water volume (14).
NOTE: Do not cover the machine during operation. If
the machine is left or not used for 5 minutes, it must
be switched off on the start/stop switch (2) pos. O.
Operation with detergents
Application of detergents is NOT possible if an
extension hose is applied.
1. Fill the container with a detergent.
2. Mount the TORNADO® PR nozzle and adjust it to
low pressure (see section 2.4.4).
3. Adjust the dosing regulator (12) to the required
volume of detergent (0-5%).
4. Apply the detergent from below and upwards.
5. Let the detergent act for the time stated on the
packing of the detergent and flush with pure water.

6
Operating Instructions EN
Separate detergent container
1. Remove the cover with suction hose from the
detergent container.
2. Mount the cover with suction hose on the separate
detergent container.
The cover has a standard thread and fits common
detergent containers. If your container does not have
a standard thread, detach the filter from the suction
hose and remove the cover. Remount the filter in the
suction hose.
Extra detergent hose can be pulled out of the ma-
chine.
2.5 Regulation of pressure / water
volume
This function is not available on model B.
Working pressure and water volume can be regu-
lated on the machine by turning the button for regu-
lation of pressure / water volume (14). The pressure
can be read on the pressure gauge (13).
2.6 Suction mode
The machine can take in water from a rain water
butt as an example. In the suction mode, the inlet
hose must be filled with water before starting up the
machine. The water inlet hose must not be too long,
approx. 5 m.
1. Make sure that the water butt is not placed on a
lower level than the machine.
2. Attach the water inlet hose to the machine and
place the other end of it in the water butt.
3. Start the machine.
4. Detach the spray lance and activate the trigger of
the spray lance. Keep the trigger activated until
water has come out for approx. 15 seconds.
5. Remount the spray lance and the machine is
ready for operation.
NOTE: The internal filter of the machine is not
intended for the filtration of large quantities of im-
purities. If the water contains leaves, sand or the
like, an external suction filter should be mounted.
For further information, please contact your nearest
Nilfisk distributor.
2.7 End of operation
1. Stop the machine by turning the start/stop switch
(2) to pos. O.
2. Disconnect the plug from the socket.
3. Shut off the water supply and activate the trigger
(6a) to relieve the machine of pressure.
Concerning storage, please refer to section 5.0.

7
3.0 Accessories EN
Wall hook For suspension of
your high pressure
washer on the wall.
Water suction kit For removal of
large amounts of water from
e.g. garden pounds.
Detergents
Only use original accessories.
Stone & Wood For flagstones, brick- and
Cleaner woodwork.
Suitable for moss and algae.
Plastic Cleaner For plastic and synthetic
materials such as garden
furniture.
Metal Cleaner For cleaning of metal such as
garden tools.
Car Combi Cleaner For cars etc. With rinsing wax.
Alu Cleaner For surfaces of aluminium.
Applied with an atomizer.
Oil & Grease For cleaning of grease and
Cleaner oil on motors for instance.
Applied with an atomizer.
Wood Cleaner For cleaning of wooden sur-
faces incl. of wooden garden
furniture.
Standard Equipment
Only use original accessories.
Nozzles Attached with the bayonet
coupling system. Stored on
the machine.
Tornado®PR (8) Universal adjustable nozzle.
Turn to the left:
high pressure.
Turn to the right:
low pressure.
Powerspeed® (9) Nozzle with rotating jet for
stubborn dirt on hard sur-
faces.
Extra Equipment
Extension hose 7 m extension hose increas-
ing the working range.
Brushes For cars and
other surfaces.
Available in
more shapes.
Tube cleaner 15 m long tube cleaner for the
cleaning of tubes and drains.
Water-sand- For removal of paint and rust.
blasting equipment Sand available from do-it-
yourself shops.
Patio Plus Equipment for
quick and regular
cleaning of hori-
zontal (tiles etc.)
and vertical sur-
faces.
Garden brush Rotating brush for cleaning of
wooden surfaces.
Rim brush Rotating brush for
cleaning of wheel
rims.
Underchassis Special spray lance for under-
spray lance chassis cleaning.

8
4.0 Maintenance EN 6.0 Recycling the washer
7.0 Questions and answers
Why do I have to use an atomizer for some deter-
gents?
Some detergents (except from soaps) must be
applied undiluted. For that purpose an atomizer or
maybe a brush is unique.
Why must the high pressure washer be stored in a
frost free room?
The machine may contain water which, when freez-
ing, may damage vital parts.
How do I store my high pressure washer in the best
possible way?
Always empty the high pressure washer of water by
activating the trigger of the spray gun - after having
disconnected the water supply. Always detach the
high pressure hose (only PRO 130/150/160) and
coil it up without bending it.
May I use an ordinary detergent in my high pres-
sure washer?
No. You may damage the cleaner and achieve a bad
result. The detergents of Nilfisk have been specially
developed for use with a high pressure washer and
ensures a correct dosage and a quick effect.
Can I do anything special to keep my high pressure
washer in a good condition?
Yes, beyond cleaning it carefully before set aside,
it will be a good idea to lubricate the couplings now
and then with grease or vaseline.
5.0 Storage EN
The machine should be stored in a frost-free
room!
Pump, hose and accessories should always be
emptied of water prior to storing as follows:
1. Stop the machine (rotary switch (2) in pos. O)
and detach water hose and accessory.
2. Restart the machine and activate the trigger.
Let the machine run until no more water runs
through the spray gun.
3. Stop the machine and unplug. Wind the elec-
tric cable round the hooks placed on the side
of the machine.
4. Separate spray gun and high pressure hose.
5. PRO 130/150/160: Detach high pressure hose,
coil it up and place it on the hose storage.
PRO 130/150/160 X-TRA: Coil the high pres-
sure hose up on the hose reel.
6. Place spray gun, nozzles and other accesso-
ries in the holders of the machine.
Should the machine by mistake be frozen, it will
be necessary to check it for damage.
NEVER START-UP A FROZEN MACHINE.
Frost damages are not covered by the
guarantee!
WARNING! Always disconnect the plug from the
socket prior to maintenance or cleaning.
To ensure a long and problem free working life,
please take the following advice:
• Wash out water hose, high pressure hose, spray
lance and accessories before mounting.
• Clean the couplings of dust and sand.
Any repair should always be made in an authorised
workshop with original spare parts.
4.1 Cleaning of nozzle
A clogging up in the nozzle causes a lower water
volume This is why cleaning is required immediately.
1. Stop the machine and disconnect the nozzle.
2. Clean the nozzle with the cleaning needle (10).
IMPORTANT: The needle should only be used
when the spray lance is detached!
3. Flush the spray lance backwards with water.
4.2 Cleaning of water inlet filter
Clean the water inlet filter regularly once a month or
more frequently according to use.
1. Detach water inlet hose and coupling (4).
2. Pull out the filter and rinse it carefully.
3. Check that it is intact before re-mounting it.
Make the old cleaner unusable immedi-
ately.
1. Unplug the cleaner and cut the electric
cable.
Do not discard electrical appliances with
household waste.
As specified in European Directive 2002/96/EC
on old electrical and electronic appliances, used
electrical goods must be collected separately and
recycled ecologically.
Contact your local authorities or your nearest dealer
for further information.

9
8.0 Trouble shooting guide EN
To avoid unnecessary disappointments, you should check the following before contacting the
Nilfisk service organisation:
Symptom Cause Recommended action
Machine refuses to start Machine not plugged in Plug in machine.
Defective socket Try another socket.
Fuse has blown Replace fuse. Switch off other machines.
Defective extension cable Try without the extension cable.
Machine stops Fuse has blown Replace fuse. Switch off other machines.
Incorrect mains voltage Check that the mains voltage corresponds to
specification on the model tag.
Thermal sensor activated Wait - the machine will start after a few
minutes.
WARNING! The trigger of the spray gun
must not be activated.
Fuse blows Fuse too small Change to an installation higher than the
amp. consumption of the machine.
You may try without the extension cable.
Machine pulsating Air in inlet hose/pump Allow machine to run with open trigger until
regular working pressure resumes.
Inadequate supply of Check that the water supply corresponds to
mains water specifications required (see model tag)
NB! Avoid using long, thin hoses (min 1/2")
Nozzle partially blocked Clean the nozzle (see section 4.1)
Water filter blocked Clean the filter (see section 4.2)
Hose kinked Straighten out hose.
High pressure hoses too long Disconnect high pressure extension hoses
and retry. (Extension hose max. 7 m).
Machine often starts Pump/spray gun is Contact your nearest Nilfisk Service Centre.
and stops by itself leaking
Machine starts, but Pump/hoses or accessory Wait for pump/hoses or accessory to thaw.
no water comes out frozen
No water supply Connect inlet water.
Water filter blocked Clean the filter (see section 4.2)
Nozzle blocked Clean the nozzle (see section 4.1)
Pump pressure drops Button for regulation of Adjust the button to correct working pressure.
pressure / water volume not
correctly adjusted
(not available on model B)
In case problems other than the above occur, please contact your local Nilfisk distributor.
UK:
Customer Services at Penrith - 01768 868995

10
9.0 Warranty conditions EN
Nilfisk guarantees high pressure washers for do-
mestic use for 2 years. If your high pressure washer
or accessories are handed in for repair, a copy of
the receipt must be enclosed.
Guarantee repairs are being made on the following
conditions:
zthat defects are attributable to flaws or defects in
materials or workmanship. (wear and tear as well
as misuse are not covered by the guarantee).
zthat the directions of this instruction manual have
been thoroughly observed.
zthat repair has not been carried out or attempted
by other than Nilfisk-trained service staff.
zthat only original accessories have been applied.
zthat the product has not been exposed to abuse
such as knocks, bumps or frost.
zthat only water without any impurities has been
used.
zthat the high pressure washer has not been used
for rental nor used commercially in any other way.
Repairs under this guarantee include replacement
of defective parts, exclusive of packing and post-
age/carriage. Besides, we refer to your national law
of sale.
The machine should be forwarded to one of the
service centres of the Nilfisk organisation with
description/specifi cation of the fault.
Repairs not covered by the guarantee conditions
will be invoiced. (I.e. malfunctions due to Possible
Causes mentioned in section Troubleshooting
Chart of the instruction manual).

21
3
4
5
6
7
89
10
11
12
13
14
15
6a 6b
16

http://www.nilfisk-advance.com
HEAD QUARTER
DENMARK
Nilfisk-Advance Group
Sognevej 25
DK-2605 Brøndby
Tel.: [phone]
E-mail: mail.com@nilfisk-advance.com
SALES COMPANIES
ARGENTINA
Nilfisk-Advance srl.
Edificio Central Park
Herrera 1855, Office 604
Ciudad Autónoma de Buenos Aires
Tel.: [phone]
AUSTRALIA
Nilfisk-Advance
48 Egerton St.
P.O. Box 6046
Silverwater, N.S.W. 2128
Tel.: [phone]
E-mail: info@nilfisk-advance.com.au
AUSTRIA
Nilfisk-Advance GmbH
Metzgerstrasse 68
5101 Bergheim bei Salzburg
Tel.: [phone]
E-mail: info.at@nilfisk-advance.com
BELGIUM
Nilfisk-Advance n.v-s.a.
Riverside Business Park
Boulevard Internationalelaan 55
Bâtiment C3/C4 Gebouw
Bruxelles 1070
Tel.: [phone]
E-mail: info.be@nilfisk-advance.com
CANADA
Nilfisk-Advance
240 Superior Boulevard
Mississauga, Ontario L5T 2L2
Tel.: [phone]
E-mail: [e-mail]
CHILE
Nilfisk-Advance de Chile
San Alfonso 1462
Santiago
Tel.:[phone]
E-mail: Pablo.Noriega@nilfisk-advance.com
CHINA
Nilfisk-Advance (Suzhou)
Building 18, Suchun Industrial Estate
Suzhou Industrial Park
215021 Suzhou
Tel.: [phone]
CZECH REPUBLIC
Nilfisk-Advance
VGP Park Horní Počernice
Do Čertous 1/2658
193 00 Praha 9
Tel.: [phone]
DENMARK
Nilfisk-Advance A/S
Industrivej 1
9560 Hadsund
Tel.: [phone]
E-mail: salg.dk@nilfisk-advance.com
FINLAND
Nilfisk-Advance Oy Ab
Piispantilankuja 4
02240 Espoo
Tel.: [phone]
E-mail: asiakaspalvelu.fi@nilfisk.com
FRANCE
Nilfisk-Advance
26 Avenue de la Baltique
Villebon sur Yvette
91944 Courtabouef Cedex
Tel.: [phone]
E-mail: info.fr@nilfisk-advance.com
GERMANY
Nilfisk-ALTO
Division of Nilfisk-Advance AG
Guido-Oberdorfer-Str. 10
89287 Bellenberg
Tel.: [phone]
E-mail: info.de@nilfisk-alto.com
GREECE
Nilfisk-Advance SA
8, Thoukididou str.
164 52 Argiroupolis
Tel.: [phone]
E-mail: nilfi[email protected]
HOLLAND
Nilfisk-Advance
Versterkerstraat 5
1322 AN Almere
Tel.: [phone]
E-mail: info.nl@nilfisk-advance.com
HONG KONG
Nilfisk-Advance Ltd.
Room 2001 HK Worsted Mills
Industrial Building
31-39 Wo Tong Tsui Street
Kvai Chung
Tel.: [phone]
HUNGARY
Nilfisk-Advance Kereskedelmi Kft.
II. Rákóczi Ferenc út 10
2310 Szigetszentmiklos-Lakihegy
Tel: [phone]
E-mail: info@nilfisk-advance.hu
INDIA
Nilfisk-Advance India Limited
349, Business Point,
No 201,2nd floor, above Popular Car World,
Western Express High way, Andheri ( East),
Mumbai - 400 069
Tel.: [phone]
IRELAND
Nilfisk-Advance
1 Stokes Place
St. Stephen’s Green
Dublin 2
Tel.: [phone]
ITALY
Nilfisk-Advance SpA
Strada Comunale della Braglia, 18
26862 Guardamiglio (LO)
Tel.: [phone]
E-mail: mercato.italia@nilfisk-advance.it
JAPAN
Nilfisk-Advance Inc.
1-6-6 Kita-shinyokohama, Kouhoku-ku
Yokohama, 223-0059
Tel.: [phone]
KOREA
Nilfisk-Advance
Kumwon B/D 3F, 471-4, Gunja-Dong
Gwangjin-Ku
Tel.: [phone]
MALAYSIA
Nilfisk-Advance Sdn Bhd
Sd 14, Jalan KIP 11
Taman Perindustrian KIP
Sri Damansara
52200 Kuala Lumpur
Tel.: [phone]
MEXICO
Nilfisk-Advance de Mexico, S. de R.L. de C.V.
Prol. Paseo de la Reforma 61, 6-A2
Col. Paseo de las Lomas
01330 Mexico, D.F.
Tel: [phone] (switchboard)
E-mail: [e-mail]
NEW ZEALAND
Nilfisk-Advance
Danish House
6 Rockridge Avenue
Penrose, Auckland 1135
Tel.: [phone]
NORWAY
Nilfisk-Advance AS
Bjørnerudveien 24
1266 Oslo
Tel.: [phone]
E-mail: info.no@nilfisk.com
POLAND
Nilfisk-Advance Sp. Z.O.O.
05-800 Pruszków
ul. 3-go MAJA 8
Tel.: [phone]
PORTUGAL
Nilfisk-Advance
Sintra Business Park
Zona Industrial Da Abrunheira
Edificio 1, 1° A
P2710-089 Sintra
Tel.: [phone]
E-mail: mkt.pt@nilfisk-advance.com
RUSSIA
Нилфиск-Эдванс
127015 Москва
Вятская ул. 27, стр. 7
Россия
Tel.: [phone]
E-mail: info@nilfisk.ru
SINGAPORE
Nilfisk-Advance Pte. Ltd.
40 Loyang Drive
Singapore 508961
Tel.: [phone]
SPAIN
Nilfisk-Advance S.A.
Torre D’Ara
Paseo del Rengle, 5 Pl. 10
08302 Mataró
Tel.: [phone]
E-mail: mkt.es@nilfisk-dvance.com
SWEDEN
Nilfisk-Advance
Sjöbjörnsvägen 5
100 73 Stockholm
Tel.: [phone]
E-mail: info.se@nilfisk.com
SWITZERLAND
Nilfisk-Advance
Ringstrasse 19
Kircheberg/Industri Stelzl
9500 Wil
Tel.: [phone]
E-mail: info.ch@nilfisk-advance.com
TAIWAN
Nilfisk-Advance Taiwan Branch
1F, No. 193, sec. 2, Xing Long Rd.
Taipei
Tel.: [phone]
THAILAND
Nilfisk-Advance Co. Ltd.
89 Soi Chokechai-Ruammitr
Viphavadee-Rangsit Road
Ladyao, Jatuchak, Bangkok 10900
Tel.: [phone]
TURKEY
Nilfisk-Advance Profesional Temizlik
Ekipmanlari Tic. A/S.
Necla Cad. No. 48
Yenisahra / Kadiköy
Istanbul
Tel.: [phone] - 60
E-mail: info.tr@nilfisk-advance.com
UNITED KINGDOM
Nilfisk-Advance Ltd.
Unit 24
Hilllside Business Park
Kempson Way
Bury St. Edmunds
Suffolk IP32 7EA
Tel.: [phone]
E-mail: sales.uk@nilfisk-advance.com
UNITED ARAB EMIRATES
Nilfisk-Advance Middle East Branch
SAIF-Zone
P.O. Box 122298
Sharjah
Tel.: [phone]
USA
Nilfisk-Advance Inc.
14600 21st Avenue North
Plymouth, MN 55447-3408
Tel.: [phone]
VIETNAM
Nilfisk-Advance Representative Office
No. 51 Doc Ngu Str.
Ba Dinh Dist.
Hanoi
Tel.: [phone]
E-mail: nilfi[email protected]