Ozito HPW-2320K User manual

2320 PSI
HIGH PRESSURE WASHER
2000W
RELEASE
RELEASE
HIGH PRESSURE
WASHER
2000W 2320PSI
INSTRUCTION MANUAL
SPECIFICATIONS
Mains Voltage: 220–240V ~ 50Hz
Input Power: 2000W
Max Permissible pressure: 16MPa (2320psi)
Rated Pressure: 11MPa (1595psi)
Rated Flow: 5.6 L/min
Max. Flow: 8.0 L/min
Water Inlet Pressure: 1.2MPa (174psi) max.
Water Inlet Temp.: 50ºC max.
Noise Rating: 95db
Weight: 9.5kg
HPW-2320K
STANDARD EQUIPMENT
3 YEAR REPLACEMENT WARRANTY*
Your product is guaranteed for a period of 36 months from the original date of purchase. If
a product is defective it will be replaced in accordance with the terms of this warranty. Warranty
excludes consumable parts, for example: valve adapters and accessories.
*This product is intended for DIY use only and replacement warranty covers domestic use.
WARNING
The following actions will result in the warranty being void.
• If the tool has been operated on a supply voltage other than that specified on the tool.
• If the tool shows signs of damage or defects caused by or resulting from abuse, accidents
or alterations.
• Failure to perform maintenance as set out within the instruction manual.
• If the tool is disassembled or tampered with in any way.
• Professional, industrial or high frequency use.
WARRANTY
Ozito Industries Pty. Ltd. 25 Fox Drive, Dandenong South, VIC 3175, Australia.
ozito.com.au
High Pressure Washer
Spray Gun, High Pressure Hose,
Lance, Extension Lance,Hose Reel,
Turbo Nozzle, Adjustable Spray
Nozzle, Patio Cleaner & Foam Bottle
2 x Wheels, Hose Reel, Handle, 6 x
Screws, Accessory Holder, Cable
Hook, Cleaning Needle & Water
Coupling with Filter
0523
IN ORDER TO MAKE A CLAIM UNDER THIS WARRANTY
YOU MUST RETURN THE PRODUCT TO YOUR NEAREST
BUNNINGS WAREHOUSE WITH YOUR BUNNINGS
REGISTER RECEIPT. PRIOR TO RETURNING YOUR
PRODUCT FOR WARRANTY PLEASE TELEPHONE OUR
CUSTOMER SERVICE HELPLINE:
Australia: 1800 069 486
New Zealand: 0508 069 486
The benefits provided under this warranty are in addition to other rights and remedies which
are available to you at law.
Our goods come with guarantees that cannot be excluded at law. You are entitled to a
replacement or refund for a major failure and for compensation for any other reasonably
foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the
goods fail to be of acceptable quality and the failure does not amount to a major failure.
Generally you will be responsible for all costs associated with a claim under this warranty,
however, where you have suffered any additional direct loss as a result of a defective product
you may be able to claim such expenses by contacting our customer service helpline above.
TO ENSURE A SPEEDY RESPONSE PLEASE HAVE
THE MODEL NUMBER AND DATE OF PURCHASE
AVAILABLE. A CUSTOMER SERVICE REPRESENTATIVE
WILL TAKE YOUR CALL AND ANSWER ANY QUESTIONS
YOU MAY HAVE RELATING TO THE WARRANTY POLICY
OR PROCEDURE.

2320 PSI
HIGH PRESSURE WASHER
2000W
RELEASE
RELEASE
1. Transport Handle
2. Power Cord Hook
3. Adaptor Holder
4. Foam Bottle Holder
5. Spray Gun Holder
6. On/Off Dial
7. Water Inlet Port
8. Transport Wheels
HIGH PRESSURE WASHER
ACCESSORIES
A)
B)
C)
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
9. Spray Gun
A) Hose Release Trigger
B) Spray Trigger
C) Trigger Lock
10. High Pressure Hose
11. Patio Cleaner
12. Foam Bottle
13. Water Coupling
14. Turbo Nozzle
15. Adjustable Spray Nozzle
16. Lance
17. Extension Lance
18. Hose Reel
1
6
7
5
3
4
2
8
13
14
17
16
15
18
9
10
11
12
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
Attaching The Transport Handle
1. Slide the base of the
transport handle into the
tabs on the top of the unit.
2. Insert the two screws
(supplied) through the tabs
and into the handle.
3. Using a phillips head
screwdriver, tighten the
screws into place.
Attaching The Spray Gun Holder Holder & Power Cord
Hook
1. Slide the spray gun holder onto
the slots on one side of the unit
until it clicks into place.
2. Slide the power cord hook onto
the slot on the other side of the
unit until it too clicks into place.
Attaching The Hose Reel
1. Install the high pressure hose reel
to the pack of the appliance with
four screws.
WARNING! ENSURE THE TOOL IS TURNED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING OPERATIONS.

2. ACCESSORIES
WARNING! ENSURE THE TOOL IS TURNED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING OPERATIONS.
WARNING! THIS PRODUCT MUST NOT BE CONNECTED
TO THE POTABLE WATER MAINS WITHOUT BACKFLOW
PREVENTION. CHECK LOCAL AND NATIONAL
PLUMBING REGULATIONS BEFORE CONNECTING THE
MACHINE TO THE POTABLE WATER MAINS.
Connecting The Water Supply
This pressure washer requires a pressurised water source with
a maximum pressure of 1MPa (145psi). It is recommended that
a reinforced garden hose (with minimum diameter of 12mm) is
used for the inlet connection. It cannot be used with a bucket and
siphon.
WARNING! RUN WATER THROUGH THE GARDEN HOSE
BEFORE ATTACHING IT TO THE PRESSURE WASHER TO
PREVENT ANY SAND OR DIRT FROM ENTERING THE
UNIT.
1. Place the mesh inlet filter
into the water coupling and
then screw this onto the
water inlet port located on
the front of the machine.
Note: The mesh inlet filter must be in place to prevent impurities in
the water source from entering the unit and damaging the pump.
WARNING! ENSURE THE GARDEN HOSE IS
ADEQUATELY RATED AND SUFFICIENTLY LONG FOR
THE INTENDED APPLICATION.
2. Push the standard quick
coupling adaptor on the end
of the garden hose onto the
hose adaptor on the pressure
washer until it clicks into
place.
Note: The standard 12mm quick coupling adaptor should be used.
3. Pull gently on the hose to ensure the connection is secure.
Connecting The Pressure Hose
1. Push the flat end of the high
pressure hose into the water
outlet port and screw it
clockwise into place.
Attaching The Spray Gun & Accessories
1. Push the desired accessory
into the spray gun lance and
twist clockwise to lock it into
place.
Note: If a longer reach is required, connect the extension lance to
the spray gun lance, and attach the desired accessory to the free
end of the extension lance.
2. Push the patio cleaner into the extension lance and twist
clockwise to lock it into place.
3. To disconnect the accessory, push the accessory towards the
spray gun, twist the accessory counter clockwise and pull it.
3. Push the end of the pressure
hose into the inlet port on the
spray gun until it clicks into
place.
4. Tug gently on the pressure hose to check that it is inserted
correctly.
WARNING! PRESSURISED WATER. SHUT OFF WATER
SUPPLY, TURN OFF UNIT AND SQUEEZE THE SPRAY
GUN TRIGGER TO RELIEVE THE PRESSURE BEFORE
DISCONNECTING THE HIGH PRESSURE HOSE.
5. To disconnect the spray gun,
press and hold down the
quick release tab and pull
out the pressure hose.
a.
b.
RELEASE
a. b.
RELEASE
a. b.
a.
b.
RELEASE
RELEASE
a.
b.

3. CONTROLS
OPERATION
Using The Foam Bottle
Pour detergent directly into
the foam bottle and attach it to
the lance. Follow the detergent
manufacturers’ directions for
use.
Using the Adjustable Spray Nozzle
The water jet output can be controlled when using the adjustable
spray nozzle.
1. Press the quick release
button on the lance.
2. Push the adjustable spray
nozzle into the lance untill it
fits firmly.
3. Turn the nozzle clockwise for
a wide, fan jet to clean larger
areas faster.
4. Turn the nozzle anti-
clockwise for a narrow
jet over a small area for
concentrated cleaning.
Note: Follow the same process to connect the turbo nozzle.
Note: The turbo nozzle does not have point 3 and point 4 features
RELEASE
WARNING! NEVER RUN BLEACH OR DETERGENTS NOT
DESIGNED FOR PRESSURE WASHERS IN THE UNIT TO
PREVENT DAMAGING THE PUMP.
Flat Fan
Solid Cone
The high pressure washer is designed to force water at high
pressure via a pump through a concentrating nozzle.
It is intended for washing dirt, mud and dust from cars, garden
equipment, outdoor furniture, clean grime from barbecue hot
plates and grills, wash down driveways, patios, decks and brick
walls.
Starting & Stopping The Unit
1. Rotate the on/off dial to the
‘ON I’ position to turn the
unit on.
2. Unlock the spray gun by
pressing the back end of the
trigger lock.
3. Squeeze the spray gun
trigger to start spraying.
4. Release the trigger to stop spraying.
WARNING! LOCK THE SPRAY GUN TRIGGER WHEN NOT
IN USE TO PREVENT ACCIDENTAL STARTING.
5. Rotate the dial to the ‘OFF
0’ position to switch the unit
off.
WARNING! DO NOT LEAVE THE UNIT IDLING IN THE
‘ON’ POSITION FOR MORE THAN 5 MINUTES WITHOUT
ACTIVATING THE SPRAY GUN. DOING SO MAY DAMAGE
THE PUMP IN THE UNIT.
WARNING! THE POWER SUPPLY FOR THIS PRODUCT
MUST BE PROTECTED BY A RESIDUAL CURRENT
DEVICE (RATED AT 30mA OR LESS).
2320 PSI
HIGH PRESSURE WASHER
2000W
ON / I
OFF / 0
2320 PSI
HIGH PRESSURE WASHER
2000W
ON / I
OFF / 0
RELEASE
a.
b.
RELEASE

4. USAGE
HPW-2320K
2320 PSI
HIGH PRESSURE WASHER
2000W
ON / I
OFF / 0
2320 PSI
HIGH PRESSURE WASHER
2000W
ON / I
OFF / 0
Overload Protection
The tool is equipped with an overload protection feature. If an
overload occurs, the tool will automatically shut off to protect the
tool.
1. In the event of an overload
turn the on/off dial to the
‘OFF 0’ position, allow
the tool to cool down and
remove the power plug from
the mains socket.
2. Shut off the water supply completely and squeeze the spray gun
trigger several times to release any built up pressure and water
in the system, then disconnect the garden hose from the water
inlet port.
3. Unscrew the hose adaptor
from the water inlet port and
inspect the mesh filter for
any blockages.
4. Clean the filter as necessary
and reinstall it when done.
5. Once the unit has cooled sufficiently, restart the unit and use as
normal.
WARNING! DO NOT CONTINUE USING THE UNIT IF
THE OVERLOAD SWITCH TRIPS AGAIN IMMEDIATELY
AFTER THE RESET.
WARNING! WHEN INSPECTING EQUIPMENT FOR
FAULTS, ENSURE THE UNIT IS SWITCHED OFF AND THE
POWER CABLE IS DISCONNECTED BEFORE CARRYING
OUT INSPECTION.
Shutting Down The Pressure Washer
WARNING! PRESSURISED WATER. SHUT OFF WATER
SUPPLY, TURN OFF UNIT AND SQUEEZE THE SPRAY
GUN TRIGGER TO RELIEVE THE PRESSURE BEFORE
DISCONNECTING THE HIGH PRESSURE HOSE.
1. Twist the on/off dial to the off
position and disconnect the
power plug.
2. Shut off the water supply
completely and squeeze the
spray gun trigger several
times to release any built up
pressure and water in the
system.
2320 PSI
HIGH PRESSURE WASHER
2000W
ON / I
OFF / 0
Quick Start Procedure
1. With the adjustable spray
nozzle attached, adjust it to
the widest spray setting.
2. Attach the garden hose to
the water inlet port and turn
on the water at the tap.
3. Squeeze the spray gun
trigger to prime the pump
and purge any air from the
system.
4. Plug the power cord into mains power.
5. Turn the unit on using the on/
off dial to start washing.
WARNING! ENSURE THE PRESSURE WASHER IS
PLACED ON A FLAT, HARD SURFACE. ALWAYS HAVE
THE PRESSURE WASHER IN AN UPRIGHT POSITION
DURING USE.
WARNING! ENSURE THAT THE SPRAY JET IS NOT
DIRECTED AT POWER LINES, ELECTRICAL OUTLETS OR
ELECTRONICS.
WARNING! HIGH PRESSURE HOSES, FITTINGS &
COUPLINGS ARE IMPORTANT FOR THE SAFETY OF
THE USER. USE ONLY HOSES, FITTING & COUPLINGS
SUPPLIED.
WARNING! USE THE PRODUCT FOR DOMESTIC
CLEANING ONLY. DO NOT USE THE PRODUCT FOR
OTHER TASKS.
WARNING! ALWAYS WEAR SAFETY BOOTS, SAFETY
GLOVES, SAFETY HELMET WITH VISOR AND HEARING
PROTECTION WHILE OPERATING THE EQUIPMENT.
WARNING! DO NOT POINT THE SPRAY JET AT ANY
PART OF YOUR BODY, OTHER PEOPLE, PETS OR
ANIMALS. THE PRESSURISED WATER STREAM CAN
CAUSE SERIOUS CUTS AND INJURIES.
PRESS & HOLD
30s to 1min
RELEASE
Flat Fan