Nilfisk-Advance 56315312 User manual

©2007 Nilfisk-Advance, Inc. 11/04 revised 3/07 Form No. 56040825
page 1 of 3
56315312 SQUEEGEE WAND KIT
Convertamatic™ Models: All
BA625 series Models: ALL
Warrior™ Models: All
BA 755 series Models: All
Adhancer™ Models: All
BA 855 Trio EDS™ Models: All
AquaPLUS™ Models: All
CONTENTS OF KIT
ITEM PART NO. QTY DESCRIPTION
56040825 1 Instruction Sheet
1 56407361 4 Clamp, Plastic
2 56009030 8 Scr, Pan Phil Thd Form 10-24 x .38
3 56315232 1 Bracket, Wand
4 56315309 1 Wand, Squeegee
5 56315311 2 Bushing
6 56002292 2 Scr, Pan Phil 1/4-20 x 1.00
7 56315344 2 Gasket, 1/4 x 1/2 x 6
NOTE: Items (1, 2, 3 & 7) come preassembled.

©2007 Nilfisk-Advance, Inc. 11/04 revised 3/07 Form No. 56040825
page 2 of 3
INSTALLATION INSTRUCTIONS
1See Figure 1. Locate the (2) Nutserts (A) behind the model decal on the left side of the machine.
2Cut through the decal to expose both nutserts (A).
3Install the (2) Bushings (5) using the (2) Screws (6) as shown.
4Install the Wand Bracket Assembly (1, 2, 3 & 7) onto the Bushings (5) as shown.
5Assemble the Wand Assembly (4) onto the Wand Bracket as shown.
Convertamatic™ model shown. Installation and use is the same on all models.
FIGURE 1

©2007 Nilfisk-Advance, Inc. 11/04 revised 3/07 Form No. 56040825
page 3 of 3
FIGURE 2
6See Figure 2. To use the wand, disconnect the Vacuum Hose (B) from the squeegee and slip the Squeegee Wand (4) hose into the end of it.
7Turn the Key Switch (C) ON and push the Wand Button (D) on the control panel.
NOTE: The steel tube of the wand is telescopic. To Lengthen or shorten; pull down on the Large Black Plastic Collar (E) to unlock and then pull
UP or push DOWN on the top portion of the steel tube (F).
Convertamatic™ model shown. Installation and use is the same on all models.