Ninja KT200 Series User manual

ninjakitchen.com
KT200
Series
OWNER’S GUIDE
PRECISION TEMPERATURE KETTLE

1-877-646-5288 1ninjakitchen.com
THANK YOU
Ninja® Precision Temperature Kettle
PLEASE READ CAREFULLY AND
KEEP FOR FUTURE REFERENCE.
These instructions are designed to help
you get a complete understanding of
your new Precision Temperature Kettle
If you have any questions, please call our
Customer Service line at 1-877-646-5288.
TECHNICAL SPECIFICATIONS
Voltage: 120V~ 60Hz
Power: 1500W
TIP: You can find the model and serial
numbers on the QR code label located under
the power base.
RECORD THIS INFORMATION
Model Number: ��������������������
Serial Number: ���������������������
Date of Purchase: �������������������
(Keep receipt)
Store of Purchase: ������������������
REGISTER YOUR PURCHASE
registeryourninja.com
1-877-646-5288
Scan QR code using mobile device
CONTENTS
Important Safeguards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Before First Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Getting to Know Your Kettle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Using Your Kettle. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Cleaning & Maintenance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Warranty ...................................................12

21-877-646-5288 3ninjakitchen.com
IMPORTANT SAFEGUARDS
READ ALL INSTRUCTIONS BEFORE USE • HOUSEHOLD USE ONLY
Read all instructions before using your
NINJA® PRECISION TEMPERATURE KETTLE
When using electrical appliances, basic safety precautions
should always be followed, including the following:
WARNING
To reduce the risk of fire, electric shock,
serious injury, death, or damage when
using this appliance, follow these basic
safety precautions.
1 To eliminate a choking hazard for young
children, discard all packaging materials
immediately upon unpacking.
2 This appliance can be used by persons
with reduced physical, sensory or mental
capabilities or lack of experience and
knowledge if they have been given
supervision or instruction concerning
use of the appliance in a safe way and
understand the hazards involved.
3 To reduce the risk of electric shock, this
appliance has a polarized plug (one
blade is wider than the other). As a
safety feature, this plug will fit into a
polarized outlet only one way. If the plug
does not fit fully into the outlet, reverse
the plug. If it still does not fit, contact a
qualified electrician. DO NOT force into
outlet or try to modify to fit.
4 Keep the appliance and its cord out of
reach of children. Do not allow children
to play or use the appliance. Close
supervision is necessary when used
near children.
5To protect against fire, electric shock,
and injury to persons, DO NOT immerse
cord, plugs, or body of machine in water
or other liquid.
6 NEVER carry the appliance by the
power cord or pull it to disconnect from
electrical socket; instead grasp the plug
and pull to disconnect.
7A short power-supply cord is provided
to reduce the risks resulting from
becoming entangled in or tripping over
a longer cord.
8 DO NOT use extension cords, external
timers or separate remote-control
systems with this product. Regularly
inspect the power cord.
9DO NOT operate the kettle with a
damaged cord or plug, or after the
appliance malfunctions, or has been
dropped or damaged in any manner.
Contact SharkNinja Operating LLC
for service.
10 For household and countertop use only.
11 DO NOT let the power cord hang over
the edge or touch hot surfaces such as
the stove.
12 NEVER use socket below counter.
13 ALWAYS place kettle on base first, then
plug cord into outlet.
14 To avoid risk of fire, electrical shock,
or damage to the unit, DO NOT use
unit in an appliance garage or under
a wall cabinet.
15 Turn off and allow to cool before putting
on or taking off parts, and before
cleaning the appliance
16 Unplug from outlet when not in use and
before cleaning.
17 DO NOT use kettle with any other base.
18 ALWAYS use appliance on a clean, dry,
level surface.
19 DO NOT place on or near a hot gas,
electric or induction burner/hob or in a
heated oven.
20 DO NOT use this appliance for
anything other than its intended use.
21 DO NOT use outdoors.
22 To avoid scalding from steam and hot
surfaces use the handle. DO NOT touch
metal surface or reach across top of
spout and opened lid when operating.
23 DO NOT use the kettle to store food
when not in use.
24 DO NOT place kettle in microwave.
25 DO NOT drink directly from the kettle.
Liquid from the kettle may be very hot.
26 DO NOT fill kettle with anything other
than water, as other liquids may damage
your kettle.
27 DO NOT overfill the kettle. Fill water only
to the MAX line.
28 DO NOT run the appliance without
water. If activated without water,
allow to cool minimum of 10 minutes
before filling.
29 Exceeding maximum water level
capacity may cause overflow.
30 Kettle MUST remain upright when
moving or carrying to avoid skin burns
and scalding.
31 DO NOT place kettle or base
in dishwasher.
32 DO NOT immerse kettle or base in water.
33 DO NOT clean with abrasive
cleaners, steel wool pads, or other
abrasive materials.
34 Allow the appliance to cool before
removing any parts and before cleaning.
35 If the product is not operating
properly, visit ninjakitchen.com or
contact SharkNinja Operating LLC for
examination, repair, or adjustment.
36 Cleaning and user maintenance shall not
be made by children.
READ AND SAVE THESE INSTRUCTIONS
Indicates to read and review instructions to understand operation and use of product.
Do not immerse in liquid.
Indicates the presence of a hazard that can cause personal injury, death or
substantial property damage if the warning included with this symbol is ignored.
Take care to avoid contact with hot surface. Always use hand protection to
avoid burns.
For indoor and household use only.

41-877-646-5288 5ninjakitchen.com
PARTS
APour Spout
B Removable & Washable Scale Filter
CCool-Touch Pad
DLid Release Button
EWater Level Gauge
FPower Base (power cord
& storage not shown)
GControl Panel
1Remove and discard any packaging
material, promotional labels, and tape
from the kettle.
2Remove all accessories from the package
and read this manual carefully. Please
pay particular attention to operational
instructions, warnings, and important
safeguards to prevent any injury or
property damage.
3Press the lid release button to open the
lid and fill the kettle with water to MAX
1.7 L (7 cups) line.
4Close the lid by pressing the cool-touch
pad until it locks closed.
BEFORE FIRST USE
5Make sure the power base is plugged
in, then place the kettle on the base
ensuring that it is fully seated.
6Press the BOIL button on the control
panel, then press START/STOP to begin
the heating process.
7Once the water reaches 212°F, the kettle
will beep to indicate that it has finished.
8Lift the kettle o the base and discard
the water. Repeat this process one more
time to ensure the kettle is clean and
ready for use.
A
B
C
E
F
G
D

7ninjakitchen.com61-877-646-5288
GETTING TO KNOW YOUR KETTLE USING YOUR KETTLE
7
CONTROL PANEL DISPLAY &
OPERATING BUTTONS
7 One-Touch Presets:
GREEN: 175°F
WHITE: 185°F
OOLONG: 195°F
COFFEE: 200°F
BLACK: 205°F
HERBAL: 210°F
BOIL: 212°F
Refer to the tea chart on page 9 for more
information.
1Temperature Display:
Live Temperature Readout: When
the kettle is placed on the base, the
temperature display will show the current
temperature of the water inside. Once
a preset or +/- button is pressed, the
selected temperature will be shown. When
a heating cycle is started, the temperature
display will show the current temperature
of the water to track progress.
NOTE: To change the temperature
display from Fahrenheit to Celsius, press
and hold the HOLD TEMP and + buttons
for 5 seconds.
NOTE: For best results, fill to at least
0.5 L when heating below 160°F.
NOTE: The temperature accuracy of the
kettle is +/- 5°F.
1 TEMPERATURE DISPLAY
3 HOLD TEMP 4 START/STOP
2 MANUAL TEMPERATURE
CONTROL
NOTE: The temperature displayed will
always return to the temperature last
selected when the kettle was in use.
NOTE: The MIN. 0.25 L level measure
is inside the kettle. Water marks on the
exterior show 0.5 L–1.7 L.
NOTE: Always fill to at least the MIN
0.25 L fill level and do not exceed the
MAX 1.7 L fill level.
POWERING ON
To turn on the kettle, unwind the cord from
the cord wrap and plug the power cord
into the socket. Unwind only the amount
of cord necessary to reach the socket. The
control panel will automatically turn on once
plugged in.
POWERING OFF
The kettle will automatically power o after
5 minutes of inactivity. To manually power
o, press and hold the START/STOP button
for 3 seconds. To turn on the kettle, press
any button on the control panel or lift the
kettle o the base.
HEATING WATER
1Press lid release button to open the lid
and fill the kettle with fresh water.
2Check the desired amount of water by
reading the water level gauge or internal
markings. The energy consumption of the
kettle can be optimised by heating only
the minimum amount of water required.
2Manual Temperature Control:
Manually customize the water temperature
using the + and - buttons to increase or
decrease by 5°F increments from 105°F
to 212°F.
3Hold Temp:
Press to turn on/o the Hold
Temp feature, which holds water at the
selected temperature for up to
30 minutes
4START/STOP:
Press to begin a heating cycle. Press again to
stop heating.
Automatic Shuto: The kettle will
automatically stop once the selected
temperature has been reached.
IMPORTANT: Heat only water inside
the kettle. Never heat or boil any
other liquids. Never steep tea or
coee directly in the kettle.
3Ensure the lid is completely closed and
position the kettle securely onto the
base. DO NOT open the lid during a
heating cycle.
4Select your desired temperature on the
control panel.
Presets: Beverages (Green, White,
Oolong, Coee, Black, Boil)
Manual: Press the +/- buttons to
manually set the temperature in 5°F
increments from 105°F to 212°F
5Press START/STOP once to start the
heating cycle. The button will illuminate
orange, the water window will illuminate,
and the display will show the current
temperature as it climbs.
NOTE: To change the temperature
mid-cycle, press the desired preset or
+/- buttons and the display will flash
for 5 seconds with the new target
temperature. To cancel the heating cycle
at any time, press START/STOP.

81-877-646-5288 9ninjakitchen.com
NOTE: To mute the kettle, press and
hold the HOLD TEMP and - buttons for
5 seconds.
NOTE: If 212°F/BOIL is selected, the
temperature will hold at 200°F for up to
30 minutes.
NOTE: The HOLD TEMP will only
activate after the water has reached
the target temperature. If HOLD TEMP
is pressed before a heating cycle, you
must first start a heating cycle.
HOLD TEMP
Hold Temp is the kettle’s ability to
maintain the selected temperature
for up to 30 minutes after a heating cycle.
Select Hold Temp any time before, during,
or within 30 seconds of completion of a
heating cycle to toggle it on. Press again
to toggle o. While the feature is toggled
on, Hold Temp will be illuminated orange
on the control panel. After 30 minutes of
holding the temperature, the kettle will
automatically shut o.
BOIL DRY PROTECTION
If the kettle has insucient water when
starting a heating cycle, the kettle will
automatically switch o to protect
from overheating and causing damage.
The kettle will beep and the temperature
display will read “dry” to signify that the
kettle has boiled dry. Allow the kettle to
cool for at least 10 minutes before refilling.
USING YOUR KETTLE – CONT.
NOTE: This table includes recommended guidelines. The ideal temperature
ranges may vary according to personal preference. Experiment with your
favorite tea/coee and adjust the temperatures and steep times to suit
personal taste.
NOTE: DO NOT steep coee or tea directly in the kettle.
Preset Given
Temperature
Recommended
Drink Types
Ideal Range For
Manual Control
Green Tea 175°F
(80°C)
Matcha
Sencha
Gyokuro
Jasmine
Gunpowder
160–175°F
(70–80°C)
White Tea 185°F
(85°C) Most White Teas 180–190°F
(80–90°C)
Oolong Tea 195°F
(90°C) Most Oolong Teas 195–205°F
(90–95°C)
Coee 200°F
(95°C)
French Press
Pour Over
Instant Coee
195–205°F
(90–95°C)
Black Tea 205°F
(95°C)
Pu’erh
Chai
Black Tea with Milk
195–205°F
(90–95°C)
Herbal Tea 210°F
(100°C)
Fruit Teas
Rooibos
Peppermint
210°F
(100°C)
Boil 212°F
(100°C)
Hot Chocolate
Oatmeal
Instant Soup
212°F
(100°C)
NOTE: If the kettle is lifted from the
base during a heating cycle, this will
cancel the cycle.
6When the water has reached the
selected temperature, the kettle will
beep and automatically switch o. If
Hold Temp is selected, the kettle will
continue to hold the temperature for
up to 30 minutes.

10 1-877-646-5288 11ninjakitchen.com
WARNING: Never immerse the kettle
body, base, or power cord in water or
place in a dishwasher.
WARNING: Do not use chemicals or
abrasive cleaners internally or externally.
1Unplug the kettle and allow to cool
down before cleaning.
2Use a damp cloth to clean the exterior
of the kettle and base. Only use non-
abrasive cleaning materials.
3The scale filter can be easily removed.
Open the lid, then grasp the filter and
slide it out by pulling upwards.
4The filter can be cleaned by running
under a hot water tap and rubbing with
a cloth or brush.
5To replace the filter, slide it back into
place at the back of the spout until it
snaps in.
CLEANING & MAINTENANCE
DESCALING
Your kettle will not work properly if it is not
descaled regularly. Regular descaling can
increase the life of the kettle, allowing it to
boil water faster and with less energy.
Scale is a naturally occurring buildup of
mineral deposits caused by impurities
in water, especially hard water. For best
performance, descale the kettle every 4-8
weeks or whenever scale buildup is present
inside.
Descaling can be completed with a
descaling agent specifically designed
for kettles. Follow the directions on the
descaling agent package,
OR
1Fill the kettle with equal parts water and
white vinegar.
2Let sit for 30 minutes.
3Discard solution and rinse kettle
thoroughly with clean water.
4Repeat this process until all deposits are
removed.
TROUBLESHOOTING GUIDE
The power base won’t turn on.
• Make sure the power cord is securely plugged into the socket.
• Insert the power cord into a dierent socket.
• Reset the circuit breaker if necessary.
The kettle is not heating up.
• The overheat control may have tripped. Let the kettle cool down.
• Ensure the kettle is fully seated on the power base.
Hold Temp function is not working.
• The Hold Temp function is not default and needs to be turned on or o by pressing the
HOLD TEMP button. When the function is on, the button will be illuminated orange. Hold
Temp will only activate when a heating cycle is active. If Hold Temp is pressed before
starting a heating cycle, you must press START/STOP to start the heating cycle.
The kettle turns o before reaching the target temperature.
• The kettle may contain too much scale. Refer to the descaling instructions on page 10 to
descale the kettle.
TEMPERATURE DISPLAY MESSAGES:
dry
• There is an insucient amount of water inside the kettle. Allow the kettle to cool for
at least 10 minutes, then add fresh, room temperature water to at least the minimum
0.25 L marking and restart the heating cycle.
• If there is already water filled up to at least the minimum 0.25 L marking, please call
Customer Service at 1-877-646-5288.
Er
•
If the temperature display shows “Er” and then a number (ex. “Er 01”),
contact Customer Service at 1-877-646-5288.

12 1-877-646-5288 13ninjakitchen.com
NOTESONE (1) YEAR
LIMITED WARRANTY
The One (1) Year Limited Warranty applies to purchases made from authorized retailers of
SharkNinja Operating LLC. Warranty coverage applies to the original owner and to the original
product only and is not transferable.
SharkNinja warrants that the unit shall be free from defects in material and workmanship for a period
of one (1) year from the date of purchase when it is used under normal household conditions and
maintained according to the requirements outlined in the Owner’s Guide, subject to the following
conditions and exclusions:
What is covered by this warranty?
1. The original unit and/or non-wearable components deemed defective, in SharkNinja’s sole
discretion, will be repaired or replaced up to one (1) year from the original purchase date.
2. In the event a replacement unit is issued, the warranty coverage ends six (6) months following
the receipt date of the replacement unit or the remainder of the existing warranty, whichever is
later. SharkNinja reserves the right to replace the unit with one of equal or greater value.
What is not covered by this warranty?
1. Normal wear and tear of wearable parts (including the Scale Filter), which require regular
maintenance and/or replacement to ensure the proper functioning of your unit, are not covered
by this warranty. Replacement parts are available for purchase at ninjaaccessories.com.
2. Any unit that has been tampered with or used for commercial purposes
3. Damage caused by misuse, abuse, negligent handling, failure to perform required maintenance,
or damage due to mishandling in transit.
4. Consequential and incidental damages.
5. Defects caused by repair persons not authorized by SharkNinja. These defects include damages
caused in the process of shipping, altering, or repairing the SharkNinja product (or any of its
parts) when the repair is performed by a repair person not authorized by SharkNinja.
6. Products purchased, used, or operated outside North America.
How to get service
If your appliance fails to operate properly while in use under normal household conditions within the
warranty period, visit ninjakitchen.com for product care and maintenance self-help. Our Customer
Service Specialists are also available at 1-877-646-5288 to assist with product support and warranty
service options, including the possibility of upgrading to our VIP warranty service options for select
product categories.
SharkNinja will cover the cost for the customer to send in the unit to us for repair or replacement. A
fee of $20.95 (subject to change) will be charged when SharkNinja ships the repaired or replacement
unit.
How to initiate a warranty claim
You must call 1-877-646-5288 to initiate a warranty claim. You will need the receipt as proof of
purchase. A Customer Service Specialist will provide you with return and packing instruction
information.
How state law applies
This warranty gives you specific legal rights, and you also may have other rights that vary from
state to state. Some states do not permit the exclusion or limitation of incidental or consequential
damages, so the above may not apply to you.

SharkNinja Operating LLC
US: Needham, MA 02494
1-877-646-5288
ninjakitchen.com
Illustrations may dier from actual product. We are constantly striving to improve our products,
therefore the specifications contained herein are subject to change withoutnotice.
NINJA is a registered trademark of SharkNinja Operating LLC.
This product may be covered by one or more U.S. patents. See Sharkninja.com/patents
for more information.
© 2021 SharkNinja Operating LLC
PRINTED IN CHINA
KT200Series�IB�MP�MV5
@ninjakitchen