
Frequency Rage : 400 MHz to 1500 MHz
Input and Output Connector : 75 ohms F-type female
Current Passing :AC/DC 1A Max,All Ports
Voltage Passing : 25 V Max
Place to Use : Indoors Only
VSWR : 2.0 or Less
1. Features
2. Specifications
400MHz Band Splitting Loss
600MHz Band Splitting Loss
1.4GHz Band Splitting Loss
Common Specifications
(Note) All specifications are subject to change without notice.
This splitter passes current through all the terminals. Please be aware that if you use it for TV antenna
system, CATV antenna system, etc., the connected equipment may be damaged.
Because it is for indoor use only, please do not use outdoors where it is exposed to water.
For good long-term connection, it is recommended to use contact pin type F type connector for RG11
type coaxial cable.
2, 4, 6 Way Splitters for WMTS Antenna
Model SA-2140, SA-4140, SA-6140
The power supplied through the core of the coaxial cable to which it is connected passes through all the
terminals, so you can operate a line amplifier that functions on the power supply via the coaxial cable.
The case is made of die-cast metal with a high shielding effect, so it has a high electromagnetic shielding
effect.