Nitho DRIVE PRO User manual

Quick start guide

Thank you for choosing NITHO
This start guide will help you through the racing wheel’s basic setup for all platforms.
The setup has been developed and tested on every level of racing difficulty.
From the beginners to experienced drivers, NITHO
is greatly performing in all kinds of racing games as Gran Turismo, Rally, Formula 1,
Formula Drift and allows you to win the podium.
- DRIVE PRO™ ONE racing wheel performs in all main gaming platforms: PC, PS4 ®,
PS3 ® , Xbox ® One, Xbox ® Series X/S and Nintendo ® Switch ®
- PC can be setup in both D-Input and X-Input modes
- Zero deadzone technology for PS4
® , Xbox ® (all versions) and PC D-Input
- 28 buttons designed for in-race comfort and quick actions
- D-pad stick allows a quicker menu selection and easy in-race control
- Analog stick can be setup as view control or as a D-pad
- Hardened metallic paddles increasing shifting feeling
and providing higher race immersion
- Solid clamps can be fastened to any desk with 5.5 cm maximum thickness
- Removable and sturdy suction cups
- Analog and metal plated accelerator and brake pedals
- Separated sequential gear shifter ideal for rally and formula drift races
Play Hard!
With NITHO
BE THE !
Main features

Index
Page 1.......... Package content
Page 2.......... First setup
Page 3.......... Clamps installation
Page 4.......... LED compatibility indicator
Page 5.......... PlayStation
® 4 setup
Page 7.......... Xbox
® One setup
Page 8.......... Xbox
® Series X|S setup
Page 10.........PC D-input setup
Page 12.........PC X-input setup
Page 14.........Nintendo
® Switch ® setup
Page 16.........PlayStation
® 3 setup

Package content
(1) Racing wheel
(2) Sequential gear shifter
(3) Pedals set
(4) Connection cable USB-A to USB Micro B (for PS4
® or Xbox ® One controller)
(5) Connection cable USB-A to USB-C (Type C) (for Xbox
® Series X/S controller)
(6) Connection cable LAN to LAN (for gear shifter)
(1) (2) (3)
(6)(4) (5)
Page 1
PS4 ® and Xbox®One
Xbox ®Series X/S

The following step is same for all the platforms:
(1) Fasten the racing wheel to a steady desk or wheel stand
(2) Connect the pedals to the wheel by the LAN port on the back side
(3) Secure the gear shifter to a steady structure and use the provided detachable
LAN cable to connect it to the dedicated port on the back of the wheel
First setup
(1) (2)
(3)
Page 2

Clamps installation
(1) 2x C-shape clamps
(2) 2x Fastening bolts
(3) 2x Removable extensions
(1) (2) (3)
Page 3
Thick desk
Slim desk
Step 1 - Insert the bolts from
the top and the clamps from
the bottom, then fasten them
together.
Step 2 - The extensions
can be removed if the
wheel is mounted on a
thick desk.
Step 3 - Fasten the clamps according to the thickness of the desk.

Different colours LED light indicates to which console the wheel is connected.
LED compatibility indicator
Blue - Indicates the connection with PlayStation ®
Green - Indicates the connection with Xbox
®
Purple - Indicates the connection with PC (D-Input)
Orange - Indicates the connection with PC (X-Input)
Red - Indicates the connection with Nintendo
® Switch ®
Page 4

PlayStation ® 4 setup
After you have setted the wheel and gear shifter as indicated in page 2, connect
the original SONY
® controller to the wheel with the USB-A to USB Micro B cable,
provided in the packaging.
Connect the wheel to the console’s USB port and turn the console on.
The wheel’s LED automatically switch on blue colour, then press the PS
® button
on the wheel.
At this point, the wheel is ready. Play the game and customize your in-game
setup, following the “PS4
® buttons layout” as displayed in page 6.
(1)
(2)
(3)
(4)
Page 5
You must connect the original SONY ® DUALSHOCK 4 ® controller to the wheel.
Third party’s controllers, not officially licensed by SONY
®, are not going to work.
Note:
In case you lose the USB-A to
USB Micro B cable, you can
replace it with any similar cable
available in the market, paying
attention that it has DATA function.
Note:

PS4 ® buttons layout
L3
(Left White)
L2
Share Options
PS
Brake Accelerator
Up (L1)
Down (R1)
R3
D-pad up
(Left Red) (Right Red)
(Left Green)
D-pad down
(Right White)
(Right Green) R2
(Left Paddle) (Right Paddle)
L1 R1
(Left Centre) (Right Centre)
D-pad D-pad
(Left Outer) (Right Outer)
Page 6
Sequential
gear shifter

Xbox ® One setup
Page 7
After you have setted the wheel and gear shifter as indicated in page 2, connect
the original Xbox
® One controller to the wheel with the USB-A to USB Micro B
cable, provided in the packaging.
Connect the wheel to the console’s USB port and turn the console on.
The wheel’s LED automatically switch on green colour, then press the Home
button on the wheel.
At this point, the wheel is ready. Play the game and customize your in-game
setup, following the “Xbox
® One buttons layout” as displayed in page 9.
(1)
(2)
(3)
(4)
Note:
You must connect the original Xbox
®One controller to the wheel.
Third party’s controllers, not officially licensed by Xbox
®, are not going to work.
Note:
In case you lose the USB-A
to USB Micro B cable, you
can replace it with any
similar cable available in the
market, paying attention that
it has DATA function.

Xbox ® Series X|S setup
Page 8
After you have setted the wheel and gear shifter as indicated in page 2, connect
the original Xbox
® Series X|S controller to the wheel with the USB-A to USB-C
Type C cable, provided in the packaging.
Connect the wheel to the console’s USB port and turn the console on.
The wheel’s LED automatically switch on green colour, then press the Home
button on the wheel.
At this point, the wheel is ready. Play the game and customize your in-game
setup, following the “Xbox
® Series X|S buttons layout” as displayed in page 9.
(1)
(2)
(3)
(4)
Note:
Note:
In case you lose the USB-A
to USB Micro B cable, you
can replace it with any
similar cable available in the
market, paying attention that
it has DATA function.
You must connect the original
Xbox®Series X|S controller to the wheel.
Third party’s controllers, not officially
licensed by Xbox®, are not going to work.

XBOX ® One & XBOX ® Series X|S
buttons layout
Brake Accelerator
Up (LB)
Down (RB)
No dedicated
function
(Left White)
Brake
Back Guide
Start
(Left Red) (Right Red)
(Left Green)
(Right White)
(Right Green) Accelerator
(Left Paddle) (Right Paddle)
LB RB
(Left Centre) (Right Centre)
D-pad D-pad
(Left Outer) (Right Outer)
No dedicated
function
Y
X
B
A
D-pad up D-pad down
Page 9
Sequential
gear shifter

PC D-Input setup
From D-Input is possible to switch to X-Input pressing the
button 13 (Home) for few seconds until the LED light
changes color to orange.
Note :
After you have setted the wheel and gear shifter as indicated in page 2, connect
the wheel to the PC’s USB port.
The wheel’s LED automatically switch on purple colour.
At this point, the wheel is ready. Play the game and customize your in-game
setup, following the “PC D-Input buttons layout” as displayed in page 11.
(1)
(2)
(3)
Page 10

PC D-Input buttons layout
Brake Throttle
Up (16)
Down (17)
(Left White)
10 9
13
(Left Red) (Right Red)
(Left Green)
(Right White)
(Right Green)
(Left Paddle) (Right Paddle)
(Left Centre) (Right Centre)
(Left Outer) (Right Outer)
11 12
14 15
56
78
4 2
31
18
19
Y
axis
Y
Rotation
D-pad
Page 11
Sequential
gear shifter

After you have setted the wheel and gear shifter as indicated in page 2, connect
the wheel to the PC’s USB port.
The wheel’s LED automatically switch on orange colour.
At this point, the wheel is ready. Play the game and customize your in-game
setup, following the “PC X-Input buttons layout” as displayed in page 13.
(1)
(2)
(3)
PC X-Input setup
Page 12
From X-Input is possible to switch to
D-Input pressing the button 13 (Home)
for few seconds until the LED light
changes color to purple.
Note :

PC X-Input buttons layout
Up (5)
Down (6)
Z-Axis (+)
Z-Axis (-)
(Left White)
10 9
13
(Left Red) (Right Red)
(Left Green)
(Right White)
(Right Green)
(Left Paddle) (Right Paddle)
(Left Centre) (Right Centre)
(Left Outer) (Right Outer)
9 10
56
4 2
31
D-pad
Z-Axis (-)
Analogue stick
+ Button 10
Z-Axis (+)
Y-Axis (-) Y-Axis (+)
Page 13
Sequential
gear shifter

Nintendo ® Switch ® setup
After you have setted the wheel and gear shifter as indicated in page 2, connect
the wheel to the Switch
® Dock’s USB port and turn the console on.
The wheel’s LED automatically switch on red colour, then press the Home
button on the wheel.
At this point, the wheel is ready. Play the game and customize your in-game
setup, following the “Switch
® buttons layout” as displayed in page 15.
(1)
(2)
(3)
Page 14

Nintendo ® Switch ® buttons layout
Up (L)
Down (R)
ZR
ZL
(Left White)
(Left Red) (Right Red)
(Left Green)
(Right White)
(Right Green)
(Left Paddle) (Right Paddle)
(Left Centre) (Right Centre)
(Left Outer) (Right Outer)
Analogue stick
+ R
A
B
X
ZR
ZL
D-pad up D-pad down
Y
D-pad
LR
Home
L R
(-) (+)
Page 15
Sequential
gear shifter

PlayStation ® 3 setup
After you have setted the wheel and gear shifter as indicated in page 2, connect
the wheel to the PS3
® USB port and turn the console on.
The wheel’s LED automatically switch on blue colour, then press the Home button
on the wheel.
At this point, the wheel is ready. Play the game and customize your in-game
setup, following the “PS3
® buttons layout” as displayed in page 17.
(1)
(2)
(3)
Page 16