Nitho DRIVEPRO V16 User manual

QUICK START GUIDE
Model: MLT-DP16-K
EN

SPECIFICATIONS
THANK YOU FOR CHOSING NiTHO DRIVE PRO WHEEL.
WE WOULD LIKE TO INTRODUCE ITS SPECIFICATIONS :
A、Compatible with Windows® 10, PS3®, PS4®, XBOX ONE®,
SWITCH® and supports US, EU, Japan versions` consoles
B、Home button to enter into Settings on PS3®, PS4®, XBOX ONE® consoles
C、It`s provided with 2 axis, D-pad and 12 action buttons
D、8 programmable buttons:
R-Paddle, L-Paddle, Brake pedal, Accelerator pedal,
L3, R3, Gear Stick
E、6 suction cups to keep the wheel stable
F、270 degrees wheel rotation, lock to lock
G、Three selectable sensitivity levels
H、Spring loaded pedals
I、 X-INPUT & D-INPUT modes selector (X-INPUT mode as default)
J、Table clamps

BUTTON LAYOUT
Controller
sync port
Pedals Port
LED light:
Mode Selector
Programmable
buttons
Sensibility
selector
Brake pedal Accelerator pedal
Home/Options
/Share Buttons
L-Paddle R-Paddle

FUNCTION KEYS
Mode PS3® PS4® XBOX
ONE®
PC
(X-INPUT)
(D-INPUT)
SWITC
H®
X X A A 2 B
○ ○ B B 3 A
□ □ X X 1 Y
△ △ Y Y 4 X
R1 R1 RB RB 6 R
L1 L1 LB LB 5 L
R2 R2 RT RT 8 ZR
L2 L2 LT LT 7 ZL
R3 R3 SR SR 12 R3
L3 L3 SL SL 11 L3
UP UP UP UP UP UP
DOWN DOWN DOWN DOWN DOWN DOWN
LEFT LEFT LEFT LEFT LEFT LEFT
RIGHT RIGHT RIGHT RIGHT RIGHT RIGHT
START OPTIONS Menu Menu 10 +
SELECT SHARE View View 9 -
Direction LX LX ←/→ ←/→
←
/
→ LX
L-wing □L2 LT LT 1 B
R-wing X R2 RT RT 2 Y
L-pedal □L2 LT LT 1 B
R-pedal X R2 RT RT 2 Y
Mode Button HOME HOME
X-Guide X-Guide
13 HOME
L2 L1 LB LB 7 ZL
R2
R1
RB RB 8 ZR
△ △ Y Y 4 X
Function Key
Action Key
D-pad
Gear Shi
PC

FUNCTION INTRODUCTION
1、The DEFAULT buttons are :
□/X, ○/B, △/Y, X/A, L1/LB, L2/LT, R1/RB, R2/RT
2、The PROGRAMMABLE buttons are :
L-Paddle , R-Paddle , Accelerator pedal , Brake pedal, L3/SL, R3/SR, Gear-shi
1、 Press & hold “SHARE” + “OPTIONS” for 3 seconds until
the LED change colour
2、Press the PROGRAMMABLE button until the LED starts blinking
3、Press the DEFAULT button until the LED stops blinking
· HOW TO CUSTOMIZE YOUR SETUP
· HOW TO RESET TO DEFAULT A PROGRAMMATION
1、 Press & hold “SHARE” + “OPTIONS” for 3 seconds until
the LED changes colour
2、Press the programmed button until the LED starts blinking
3、Press the programmed button until the LED stops blinking
· HOW TO RESET TO DEFAULT ALL THE PROGRAMMATIONS
1、 Press & hold “SHARE” + “OPTIONS” for 3 seconds until the
LED changes colour
2、Press & hold “OPTIONS” for 4 seconds until the LED changes
colour again
All the programmed buttons are cleared
1、Press & hold “SHARE” + “OPTIONS” for 3 seconds until the
LED changes colour
2、Press D-PAD LEFT until the LED changes colour again
The pedals are programmed as Y-AXIS ( Accelerator & Brake )
· HOW TO SETUP THE PEDALS AS ACCELERATOR & BRAKE
PROGRAM FUNCTIONS
· INTRODUCTION TO THE SETUP
You can assign to the (PROGRAMMABLE) buttons the functions of the (DEFAULT) buttons

Wheel sensitivity is adjustable from the sensibility selector (LO MID HI)
· WHEEL SENSITIVITY ADJUSTMENT (3 LEVELS)
1、 Press & hold “SHARE” + “OPTIONS” for 3 seconds until the
LED changes colour
2、Press D-PAD RIGHT until the LED changes colour again
L-Paddle and R-Paddle will be programmed as Y-AXIS ( Accelerator & Brake )
· HOW TO PROGRAM THE L-PADDLE & R-PADDLE
AS ACCELERATOR & BRAKE
1、 Press & hold “SHARE” + “OPTIONS” for 3 sec until the LED changes colour
2、Press the L/R-Paddle or pedal , the LED will start to blink
3、Press the L/R-Paddle or pedal until the LED turn o
· HOW TO CLEAR THE PROGRAMMATION OF
L/R-WING OR PEDALS

PLATFORMS
PS3® GUIDE
1、 Connect the pedals to the wheel and then connect the wheel to the
PS3®console
2、Press the HOME button to enter the XBM window
3、Press and hold the MODE button to enter the Menu setup window
PS4® GUIDE
1、 Connect the pedals to the wheel then connect the wheel to the PS4® console
2、Connect the original PS4® controller to the wheel with the USB cable provided
(or a cable with data function)
3、Aer the connection has been established, the red LED on the wheel will turn on
then press the HOME button on the wheel to select the User
4、To enter in the XBM window press the HOME button
1、 Connect the pedals to the wheel then connect the wheel to the XBOX ONE®
console
2、Connect the original XBOX ONE® controller to the wheel with the USB cable
(or a cable with data function)
3、Aer the connection has been established, the red LED on the wheel will turn on
4、To enter in the main menu press the HOME button
XBOX ONE® GUIDE
SWITCH® GUIDE
1、 Connect the pedals to the wheel then connect the wheel to the SWITCH® console
2、Aer the connection has been established, the red LED on the wheel will turn on
3、Follow the route to activate the wheel : System Settings -> Controllers and
sensors -> Pro Controller Wired Communication -> Set to "ON"
To screenshot :
Press“SHARE” and “OPTIONS”

PC GUIDE
1、 The wheel is set on X-INPUT as default.
2、Press & hold HOME for 3 seconds to switch to D-input.
the LED will switch o and switch on again aer 0.5 seconds
· X-INPUT
1、 Connect the pedals to the wheel then connect the wheel to the SWITCH® console
2、Aer the connection has been established, the red LED on the wheel will turn on
3、Follow the route to activate the wheel : System Settings -> Controllers and
sensors -> Pro Controller Wired Communication -> Set to "ON"
To screenshot :
Press“SHARE” and “OPTIONS”
1、 Enter Test interface to test buttons and axis functions
2、Enter Calibration interface to calibrate the axis
· TEST
The Driver is required on PC
1、Follow the link on www.nitho.com to download the driver :
https://nitho.com/pages/downloads
· DRIVER
1、 Start→Control Panel→programs/Function
2、Find the driver you want to remove in the Interface ”current installed programs”.
Click “Remove” and follow the instructions to get the successful uninstall.
· DRIVER UNINSTALL

TROUBLE SHOOTING
PRECAUTIONS
1、 If the connection LED is not on, please re-connect to the controller again and
retry
2、If the wheel do not give any response, turn o and on again the console and
procees the wheel setup once again
1、Read carefully the user manual before using the wheel
2、Do not disassemble or modify
3、Avoid to store in a smoky, humid or dusty place
To easly remove the wheel from the table
pull and raise up the strap on the suction cup side
· SUCTION CUP

www.nitho.com
SERVICE & SUPPORT
For any question and support request, contact us on
[email protected] or visit our website
www.nitho.com
WWW.NITHO.COM NITHOGAMES
NITHOGAMES
[email protected]
NiTHO GmbH – Victoriastrasse 3b – 86150 Augsburg – Germany

快速使用指南
型号: MLT-DP16-K
CN

性能规格
感谢您购买NITHO DRIVE PRO WHEEL
该方向盘规格性能如下 :
A、兼容Windows® VISTA®/7/8/10, PS3®, PS4®, XBOX ONE®, SWITCH®
并支持美国, 欧洲, 日本版本的主机
B、Home键进入PS3®, PS4®, XBOX ONE®主机设置
C、有两个轴, 2个方向键和12个动作按钮
D、8个可编程按钮:
右翼, 左翼, 制动踏板 (□/Y-/LT), 油门踏板 (X/Y+/RT),
L3, (L3/11/SL), R3 (R3/12/SR), 变速杆(-/+/R)
E、6个吸盘，保持方向盘稳定
F、方向盘可270度旋转(向左135度, 向右135度)
G、三种灵敏度选择
H、弹簧踏板
I、X输入和D输入模式选择器 (默认为X输入模式)

按钮布局
手柄接口
踏板接口
模式选择
指示灯
可编程按钮
灵敏度选择
制动踏板
(□/Y-/LT)
油门踏板
(X/Y+/RT)
Home/Options
/Share 按钮
左翼
换档拨片
右翼
换档拨片

功能键
模式 PS3® PS4® XBOX
ONE®
PC
(X-INPUT)
(D-INPUT)
SWITCH®
X X A A 2 B
○ ○ B B 3 A
□ □ X X 1 Y
△ △ Y Y 4 X
R1 R1 RB RB 6 R
L1 L1 LB LB 5 L
R2 R2 RT RT 8 ZR
L2 L2 LT LT 7 ZL
R3 R3 SR SR 12 R3
L3 L3 SL SL 11 L3
UP UP UP UP UP UP
DOWN DOWN DOWN DOWN DOWN DOWN
LEFT LEFT LEFT LEFT LEFT LEFT
RIGHT RIGHT RIGHT RIGHT RIGHT RIGHT
START OPTIONS Menu Menu 10 +
SELECT SHARE View View 9 -
方向
LX LX ←/→ ←/→ ←
/
→ LX
左翼
□L2 LT LT 1 B
右翼 X R2 RT RT 2 Y
左踏板
□L2 LT LT 1 B
右踏板 X R2 RT RT 2 Y
模式 HOME HOME
X-Guide X-Guide
13 HOME
L2 L1 LB LB 7 ZL
R2
R1
RB RB 8 ZR
△ △ Y Y 4 X
功能键
动作键
方向键
变速杆
PC

功能介绍
1、下面是默认按钮 (可以分配其他功能):
□//1/X, ○/3/B, △/4/Y, X/2/A, L1/5/LB, L2/7/LT, R1/6/RB, R2/8/RT
2、下面是可编程按钮 (可以设置):
左翼 (□/1/LT), 右翼 (X/2/RT), 油门踏板 (X/2/RT), 制动踏板
(□ /1/LT), L3/11/SL, R3/12/SR, Gear-shi (L2/7/LB,R2/8/RB)
1、 按住 “SHARE/9/View” + “OPTIONS/10/Menu” 键 3 秒直到绿灯亮起
2、按下可编程按钮直到绿灯闪烁
3、按下默认按钮直到绿灯关闭
· 编程设置
· 清除单一编程
1、 按住 “SHARE/9/View” + “OPTIONS/10/Menu” 键 3 秒直到绿灯亮起
2、按下已编程按钮直到绿灯闪烁
3、再次按下已编程按钮直到绿灯会关闭
· 清除全部编程
1、 按住 “SHARE/9/View” + “OPTIONS/10/Menu” 键 3 秒直到绿灯亮起
2、按下 “OPTIONS/10/Menu” 键 4 秒直到绿灯关闭
全部编程按钮清除编程，恢复默认设置
1、 按住 “SHARE/9/View” + “Option/10/Menu” 键
3 秒直到绿灯亮起
2、按下方向左键, 绿灯将关闭
踏板已编辑为 Y 轴
· 编缉踏板为Y轴
程序功能
· 介绍
您可以指定一些默认按钮的功能转变为编程按钮功能

方向盘敏度可从灵敏度选择器(LO MID HI)调整
· 方向盘灵敏度调整 (3种等级)
1、 按住 “SHARE/9/View” + “Option/10/Menu” 键
3 秒直到绿灯亮起
2、按下方向左键, 绿灯将关闭
左翼和右翼已编辑为 Y 轴
· 编缉左翼和右翼为Y轴
1、 按住 “SHARE/9/View” + “OPTIONS/10/Menu” 键 3 秒直到绿灯亮起
2、按下左翼和右翼或者踏板, 绿灯将会闪烁
3、按下左翼和右翼或者踏板直到绿灯关闭
注意:
当方向盘断电时，所有设置都不会被清除
· 清除左翼和右翼或者踏板y轴编程

主机操作说明
PS3®
1、 连接方向盘到 PS3® 主机，然后连接踏板到方向盘
2、在 PS3® 游戏中, 按一次 HOME 键进入 XBM 窗口
3、按住 HOME 键进入菜单设置窗口
PS4®
1、 连接方向盘到 PS4® 主机，然后连接踏板到方向盘
2、使用原装数据线连接 PS4® 原装手柄到方向盘(或者带数据功能的第三方数据线)
3、在连接建立之后, 方向盘上的红色 LED 灯就会亮起来，然后按下方向盘
上的 HOME 键开始游戏
4、在 PS4® 游戏中，按一次 HOME 键进入 XBM 窗口
1、 连接方向盘到XBOX ONE®主机，然后连接踏板到方向盘
2、使用原装数据线连接XBOX ONE®原装手柄到方向盘
(或者带数据功能的第三方数据线)
3、在连接建立之后, 方向盘的红色 LED 灯就会亮起来
4、在XBOX ONE®游戏中，按下HOME键进入主菜单
XBOX ONE®
SWITCH®
1.、连接方向盘到SWITCH®主机，然后连接踏板到方向盘
2、在连接建立之后, 方向盘的红色 LED 灯就会亮起来
3、打开任天堂系统设置,进入手柄与感应器，将“Pro手柄的有线通讯”打开
截图 :
按下“SELECT/SHARE/9/VIEW/-” 和“START/OPTIONS/10/MENU/+”

1、 连接方向盘到 PS4® 主机，然后连接踏板到方向盘
2、使用原装数据线连接 PS4® 原装手柄到方向盘(或者带数据功能的第三方数据线)
3、在连接建立之后, 方向盘上的红色 LED 灯就会亮起来，然后按下方向盘
上的 HOME 键开始游戏
4、在 PS4® 游戏中，按一次 HOME 键进入 XBM 窗口
PC
1、 方向盘默认设置为 X-INPUT
2、按住 HOME 键3秒，切换到D-input时， LED 就会关闭并在 0.5 秒后重新打开
· X-INPUT
1、 进入测试界面，检查按钮和轴功能
2、进入校准界面，对轴进行校准
· 测试
1、 启动→ 控制面板→ 应用程序
2、在界面中找到要删除的驱动程序，点击卸载并按照提示操作完成卸载
· 驱动程序卸载

简单故障排除
注意事项
1、 如果连接指示灯不亮, 请重新连接手柄并重新操作
2、如果方向盘没有任何反应, 关闭并再次打开控制台再次进行方向盘设置
1、使用前请仔细阅读使用手册
2、不要拆卸或修改产品
3、避免存放在烟雾弥漫、潮湿或多尘的地方
拉起吸盘一侧的带子
以便将方向盘从工作台上拆下
· 吸盘

www.nitho.com
如有任何问题，请联系我们
[email protected]
www.nitho.com
服务和帮助
WWW.NITHO.COM NITHOGAMES
NITHOGAMES
[email protected]
NiTHO GmbH – Victoriastrasse 3b – 86150 Augsburg – Germany