NIXON THE SMALL FULL NELSON User manual

ENGLISH ONLY
• THE SMALL FULL NELSON

WELCOME
YOU JUST BOUGHT A NIXON WATCH.
HOW ABOUT THAT. WELCOME TO THE
NIXON SIDE, A SIDE THAT’S ABOUT
CUSTOM-BUILT PRODUCT, QUALITY,
AND DURABILITY. WE’RE STOKED YOU
SELECTED ONE OF OUR WATCHES.
THE FACT THAT YOU BOUGHT A NIXON
MEANS YOU CAN PROBABLY TELL TIME,
BUT YOU MAY NOT BE FAMILIAR WITH
ALL THE DOO-DADS AND FEATURES OF
OUR WATCHES. SO IF YOU’RE STUCK,
READ THROUGH THESE INSTRUCTIONS.
OR GET YOUR FRIENDS TO READ THEM
AND THEN THEY CAN TELL YOU
WHAT’S UP.
THE SMALL
FULL NELSON

NORMAL TIME MODE THE MODES
SECONDS/
OR DAY
CHIME ICON
MONTH/DAY
HOURS/MINUTES
ALARM ICON
AM/PM
MODES
THE MODES
NORMAL TIME
DUAL TIME (DU)
CHRONOGRAPH (CH)
COUNT DOWN (TR)
ALARM (AL)
PACER (PC)
THE BUTTONS
SET/LIGHT: Night light. Press and hold for setting.
MODE: This button changes between Time, Chrono, Chrono Recall,
Timer, Dual Time and Alarm mode. Use to select setting
when in setting modes.
LIGHT: Night Light. Also used to toggle between Lap and Split time
in Chrono Recall.
STOP/RESET: This button stops and resets the Chrono. It toggles
the Alarm on/off in Alarm mode. It toggles the Chime on/off.
START/LAP: This button starts the Chrono and records Chrono
Laps. Used to (increase) numbers in Setting Modes.
This button starts the Timer and is used to toggle between
12 and 24 hour modes
NORMAL TIME MODE
TO SET THE TIME
PUSH and HOLD FOR 2 SECONDS the SET BUTTON. The DAY will blink.
PUSH the STRT/STP button to scroll to the right day.
PUSH the MODE button. The MINUTES will blink.
PUSH the STRT/STP button to get to the right minute.
PUSH the MODE button. The HOURS will blink.
You know the drill by now: follow the same trick to set the DAY, MONTH, and YEAR.
PUSH the STRT/STP button to show the day of the week or seconds.
LIGHT/RESET
MODE
SET
START/STOP

SECONDS/
OR DAY
CHIME ICON
NORMAL TIME
DUAL MODE
DUAL TIME
ALARM ICON
AM/PM
DU
CHRONOGRAPH DUAL TIME
CHRONOGRAPH
MODE
SPLIT HEADING
1/100 SEC.
SECONDS
MINUTES
HOURS
CH
DUAL TIME
PUSH the MODE button to enter DUAL TIME MODE. (You will see the DU
indicator, telling you you’ve entered, DUAL TIME MODE)
PUSH and HOLD FOR 2 SECONDS the SET button.
The hour will blink.
PUSH the STRT/STP button to get to the right hour.
PUSH the SET button to set.
PUSH the STRT/STP button to switch to 24 hour display.
CHRONOGRAPH (STOP WATCH)
PUSH MODE to get to CHRONO MODE. (You will see the CH indicator
telling you you’ve entered CHRONOGRAPH mode).
To Set
PUSH the LIGHT/SPLIT button to reset.
To Start
PUSH the STRT/STP button to stop and start.
For Splits
While the CHRONO is running
PUSH the LIGHT/SPLIT button for split. Your split will be displayed under
the SPL1 heading.
PUSH the LIGHT/SPLIT button for up to four splits.
To Stop,
PUSH the STRT/STP button.
PUSH the SET button to scroll through your splits.
Man, you’re fast.

COUNTDOWN TIMER
UP INDICATOR
NORMAL TIME
COUNT DOWN
MODE
MINUTES
HOURS
TR
COUNTDOWN TIMER
PUSH MODE to get to countdown mode. (You will see the TR indicator
telling you you’ve entered COUNTDOWN MODE.
To Set
PUSH and HOLD FOR 2 SECONDS the SET button. The minute will blink.
PUSH the STRT/STP button to adjust the minute.
PUSH the MODE button. The hour will blink.
PUSH STRT/STP to adjust the hour.
PUSH the SET button, your watch is now ready to countdown.
To Start the Countdown
1. PUSH the STRT/STP button.
Note: an alarm will sound when the countdown is complete. If you ignore
it, it won’t go away. The Countdown will begin to count UP so you can tell
how long you’ve neglected your deadline. This will be indicate by the “UP”
letters near the second numbers.
PRESS any button to stop beep.
ALARM MODE
CHIME ICON
NORMAL TIME
ALARM MODE
ALARM TIME
ALARM ICON
AM/PM
AL
ALARM MODE
PUSH the MODE button to go to ALARM MODE (you will see the AL
indicator telling you you’ve entered ALARM mode).
To Set
PUSH and HOLD for 2 SECONDS the SET button. The minute will blink.
PUSH the STRT/STP button to adjust the minute.
PUSH the MODE button. The hour will blink.
PUSH the STRT/STP button to adjust the hour.
PUSH the SET button to set alarm.
To Activate Alarm.
In ALARM MODE (AL) push the STRT/STP button to turn alarm
on/off. When “on” you will see the Nixon Logo.
To Turn off ringing Alarm:
Press the STRT/STP button.
To Activate Hourly Chime
In ALARM MODE (AL) push the LIGHT button to turn chime on/off.
When “on” you sill see the ( ))))) mark.