Noah Systems PL Series User manual

PRODUCT MANUAL
PL LASER SERIES
PL-2-445 |PL-5-445 |PL-3-525 | PL-9-445 |PL-410-445 | PL-445-520
PL-2-445 |PL-5-445 | PL-3-525 PL-9-445 PL-410-445 | PL-445-520

2
TABLE OF CONTENTS
INTRODUCTION
Reference Guide 3
Physical Characteristics 4
OPERATION
Operational Modes 5
BATTERY INFORMATION
Battery Life 6
Recharging Batteries 6
FEATURES
Usage Ranges 6
WARRANTY 8-9
CONTACT FOXFURY 9

3
PL LASER REFERENCE GUIDE
ALSO INCLUDED
AC Charger
Carry Strap
Laser Goggles
Case
P/N PL-2-445, PL-5-445, PL-3-525
P/N PL-410-445 & PL-445-520
POWER/MODE
SWITCH
ANTI-ROLL
HEAD
SAFETY
INTERLOCK
CHARGING
PORT
SAFETY
INTERLOCK
ANTI-ROLL
HEAD
CHARGING
PORT
POWER/MODE
SWITCH
WAVELENGTH
SELECTOR SWITCH
1/4" 20
MOUNT
1/4" 20
MOUNT

4
PHYSICAL CHARACTERISTICS
Please read below before using the PL Forensic Laser System as it relays
beneficial operating and safety information.
PL 445NM BLUE 2W FORENSIC LASER SYSTEM
PL 445NM BLUE 5W FORENSIC LASER SYSTEM
P/N PL-2-445 & PL-5-445
DIMENSIONS
Length: 11.1 in (282 mm)
Handle Diameter: 1.9 in (48 mm)
Head Size: 3.9 in (99 mm)
WEIGHT 4.1 lbs (1.9 kg)
PL 445NM BLUE 9W FORENSIC LASER SYSTEM
P/N PL-9-445
DIMENSIONS
Length: 11.1 in (282 mm)
Handle Diameter: 1.9 in (48 mm)
Head Size: 4.13 in (105 mm)
WEIGHT 4.7 lbs (2.13 kg)
PL 525NM GREEN 3W FORENSIC LASER SYSTEM
P/N PL-3-525
DIMENSIONS
Length: 11.1 in (282 mm)
Handle Diameter: 1.9 in (48 mm)
Head Size: 3.9 in (99 mm)
WEIGHT 4.1 lbs (1.9 kg)
PL BLUE & UV FORENSIC LASER SYSTEM
PL BLUE & GREEN FORENSIC LASER SYSTEM
P/N PL-410-445 & PL-445-520
DIMENSIONS
Length: 12.25 in (310 mm)
Handle Diameter: 2.8 in (58 mm)
Head Size: 4.1 in (104 mm)
WEIGHT 4.7 lbs (2.1 kg)

5
To activate:
• Insert the Safety Interlock
• Press the Power/Mode Switch located at the base of the laser
• Press the Power/Mode Switch according to desired mode
MODE PL-2-445 PL-5-445 PL-9-445 PL-3-525
11 Watt (Blue) 1 Watt (Blue) 1 Watt (Blue) 1 Watt
(Green)
22 Watt 2 Watt 3 Watt 2 Watt
3 N/A 3 Watt 5 Watt 3 Watt
4 N/A 5 Watt 9 Watt N/A
MODE PL-410-445 PL-445-520
BLUE UV BLUE GREEN
13 Watt 1 Watt 3 Watt 1 Watt
26 Watt 2 Watt 6 Watt 2 Watt
39 Watt 3 Watt 9 Watt 3 Watt
NOTE: After the Power Switch is powered off, it will not retain the mode in memory and will start again at
Mode 1 when powered back on; this insures additional safety from accidental over exposure, as well as
lower power to be used at short distances.
NOTE: Lasers are equipped with thermal protection that may shut off during prolonged use. The unit will
be able to turn back on when allowed to cool down.
OPERATIONAL MODES

6
Lithium Ion Rechargeable Battery System (included) consists of Lithium Ion
Rechargeable Batteries, Battery Cap, and AC Adaptor.
BATTERY LIFE
P/N MODE BATTERY LIFE
PL-2-445
FULL POWER
120–150 minutes*
PL-5-445 60–75 minutes*
PL-9-445 40–45 minutes*
PL-3-525 120 minutes
PL-410-445 60 minutes
PL-445-520 60 minutes
*Battery life may vary according to capacity of the charged battery pack, age and ambient conditions.
RECHARGING BATTERIES
Lithium Ion Battery System takes approximately 4 hours to charge fully.
While connected to the AC Adaptor, the GREEN light on the rear of the PL is
ON. Its function is only to advise that you are attempting to charge.
The AC adaptor also has a light which is GREEN when plugged into a wall. As
soon as you connect it to the PL for charging, it turns RED. Full is shown by a
non-blinking GREEN LED on the AC Adaptor.
For PL-2-445 and PL-5-445:The typical usage range to the surface being
investigated is 4 -12 in (100 - 305 mm) but is useful for general search at up
to 5 - 8 ft (1.5 - 4.6 m) or pattern photos at up to 30 ft (9 m) with fluorescent
reactant aid.
For PL-9-445: The typical usage range to the surface being investigated is 10
- 15 in (254 - 381 mm) but is useful for general search at up to 5 - 15 ft (1.5 -
4.6 m) or pattern photos at up to 30 ft (9 m) with fluorescent reactant aid.
For PL-3-525: The typical usage range to the surface being investigated is 10 -
15 in (254 - 381 mm) but is useful for general search at up to 5 - 8 ft (1.5 - 2.4
m) or pattern photos at up to 30 ft (9 m) with fluorescent reactant aid.
For PL-410-445: The typical usage range to the surface being investigated is
BATTERY INFORMATION
USAGE RANGES

7
10 - 15 in (254 - 381 mm). The 410nm wavelength is useful for general search
at up to 5 - 8 ft (1.5 - 2.4 m), the 445nm wavelength is useful for general
search at up to 5 - 15 ft (1.5 - 4.6 m), or pattern photos at up to 30 ft (9 m)
with fluorescent reactant aid.
For PL-445-520: The typical usage range to the surface being investigated is
10 - 15 in (254 - 381 mm). The 520nm wavelength is useful for general search
at up to 5 - 8 ft (1.5 - 2.4 m), the 445nm wavelength is useful for general
search at up to 5 - 15 ft (1.5 - 4.6 m), or pattern photos at up to 30 ft (9 m)
with fluorescent reactant aid.

8
Do not stare in laser for long peri-
ods of time of from a close range
shorter than the NOHD defined.
Do not look directly into the laser
light during operation, even for a
brief period. This can be harmful
to the eyes due to the intensity of
the laser light and short range.
The user should operate the laser
without wearing any reflective jew-
elry like watches, rings, bracelets,
etc. that could send reflections
back to the user's eye.
Avoid touching the head of the
laser. It will get very warm or hot.
Rubber insulators have been stra-
tegically installed to protect the
user and to protect the surfaces
where the laser will be placed.
The PL Laser is heavy. If the laser
falls, it may cause injury to people
or objects. Footwear that covers
the toes should be worn in the
area where this tool is used.
FoxFury, LLC is not responsible
for any injury or damage caused
during the use of this product.
Do not use under the influence of
drugs or alcohol.
EYE & SKIN SAFETY RANGES
• Nominal Ocular Hazard Distance
(NOHD): Safest more than 48 in
(1.2 m) from eyes
• Nominal Skin Hazard Distance
(NSHD): Safest more than 4 in
(101.6 mm) from skin
• *Nominal Ocular Hazard Area: 41
square feet (3.8 square meters).
Persons in this area should be
wearing laser safety eyewear.
This region is where the specular
reflections from mirrors, chrome,
and stainless steel surfaces (at
any angle), and glossy plastic or
laminate surgaces at low angles can
reflect the laser beam with little
WARRANTY AND OTHER
INFORMATION
IPX7
PRODUCT DURABILITY
Meets NFPA 1971-2007 Fire Resistant
Requirements: 500° F / 260° C for 30
minutes
Temperature range of use: -10° to 40° C
(14° - 104 F)
CARE/CLEANING
Your PL Forensic Laser System is a
professional tool. Regular maintenance
and care of your light will maximize
performance for you. As needed, wash
your Laser using a soft washcloth, clean
water and a mild soap. Be sure that all
parts are reassembled securely before
washing. When done, pat dry with a
damp cloth.
AVAILABLE ACCESSORIES
Carry Strap, P/N 600-100
Case, P/N 80-001
Laser Goggles OD 7+ Orange, P/N
600-1050
Laser Goggles OD 6+ Yellow, P/N
600-1060
Laser Goggles OD 5+ Red, P/N
600-1070
CS Eye Laser Goggles, Orange &
Yellow, P/N 600-1160
CS Eye Laser Goggles, Yellow &
Orange, P/N 600-1170
WARNINGS
FoxFury, LLC is not responsible for the
incorrect use of any FoxFury Lighting
product.
Always operate the PL Laser with
appropriate goggles.
Lights are strong enough to cause
damage to the human eye.
3 M 1 M

9
diffusion.
• Skin exposure at from 0.25 - 1 in
(6.35 - 25.4 mm) will feel painful
in about 0.5 of a second. Expect
a quick pain reation and withdraw
quickly from the beam.
LASER SAFETY
Class 3B - Output beam is classified at
Class 3B
A Class 3B laser is hazardous if the
eye is exposed directly, but diffuse
reflections such as those from paper or
other matte surfaces are not harmful.
The AEL for continuous lasers in the
wavelength range from 315 nm to far
infrared is 0.5 W. For pulsed lasers
between 400 and 700 nm, the limit
is 30 mJ. Other limits apply to other
wavelengths and to ultra-short pulsed
lasers. Protective eyewear is typically
required where direct viewing of a class
3B laser beam may occur.
As an example, Class 3B lasers are used
inside CD and DVD writers, although
the writer unit itself is Class 1 because
the laser light cannot leave the unit.
But technicians that work on the inside
of the units, must wear laser safety
eyeglasses.
Five Class-4 lasers are used to create
the homogeneous output beam, free
of the normal interference patterns
and speckle that direct laser beams
(like laser pointers) can create upon
reflection or backscatter. The beam
diffusers greatly attenuate the output
beam power and allow them to be mixed
on target.
The Class-4 lasers are equipped with
a safety plug-key and a set of tamper-
proof screws. The safety key must
be removed to disconnect power if
unit is opened for inspection, cleaning,
or maintenance, by factory certified
technicians.
The typical user should have no reason
to open the front section of the laser-
light, please leave that to experienced
technicians with the proper tools and
protections available.
It is recommended that the safety plug-
key have a removable clasp feature
added (like for your car keys) so that
the safety plug-key can be easily
separated from the laser.
The safety plug-key, allows the operator
to “safe” the laser, if they need to leave
the unit on-scene and take a break, or
use the restroom; by taking the key
with them – to protect the curious from
themselves.
Eye protection is strongly recommended
when using this product.
The user should operate the laser
without wearing any reflective jewelry,
like watches, rings, or bracelets, etc. that
could send reflections back to the user's
eye.
LIMITED LIFETIME
WARRANTY
FoxFury, LLC (“FoxFury”) warrants
this product to be free from defects
in material for a lifetime of use except
for batteries, LEDs, abuse, and
normal wear. We will repair or replace
this product should we determine it
to be defective. This limited lifetime
warranty excludes rechargeable
batteries, chargers, switches, and
electronics, which have a 2-year
warranty with proof of purchase.
This limited lifetime warranty is
given only to the original end user of
the accompanying product. If you
purchased a product from someone
other than an authorized FoxFury
reseller/distributor or if the product
was used (including but not limited
to demo models, show models or
refurbished product by someone
other than FoxFury) prior to your
purchase, you are not the Original
Purchaser and the product that you
purchased is not covered by this
warranty. This limited warranty is
VOID if this Product has been altered

10
or modified in any way (including but
not limited to attempted warranty
repair without authorization from
Foxfury and/or alteration/removal
of the serial number). To expedite
warranty concerns, we encourage
the end user to register their FoxFury
Product at www.foxfury.com/pages/
warranty-registration.
THIS IS THE ONLY WARRANTY,
EXPRESSED OR IMPLIED,
INCLUDING ANY WARRANTY OF
MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE.
INCIDENTAL, CONSEQUENTIAL
OR SPECIAL DAMAGES ARE
EXPRESSLY DISCLAIMED EXCEPT
WHERE SUCH LIMITATION IS
PROHIBITED BY LAW.
You may have other specific legal
rights which vary by jurisdiction. Go
to www.foxfury.com/pages/warranty
for a complete copy of the warranty.
Retain your receipt for proof of
purchase.
CONTACT FOXFURY
FoxFury, LLC
Oceanside, CA 92056 USA
Toll-Free: 844-FOXFURY
Tel: [phone]
Fax: [phone]
Email: [e-mail]
Web: FoxFury.com
All FoxFury products are designed in
Oceanside, CA. All FoxFury products
are manufactured with the highest
quality USA and foreign parts.
Products are assembled in either
FoxFury’s controlled plant in Asia or
the USA, under strict quality control.

11

FOXFURY.COM 3/2019