NOBLE & NOBLE Nobilis Sonum 98 User manual

YOU,
YOUR MUSIC AND
THE NOBLE & NOBLE SPEAKERS
The world’s first seven-sided speakers
The obvious choice of a new generation, the streaming generation
They will change the way you will listen to music and experience films

2
User Manual for the Noble & Noble speakers
Thank you for having purchased the Noble & Noble speakers.
Now that you have unboxed the speakers it is time to get the maximum out of
them, right? Right! But how? By carefully reading this User Manual fully.
In case you wish to view this User Manual on a screen please
scan the QR code or Copy and Paste this link into the search
bar:
https://www.noble-noble.com/s/Noble-Noble-User-Manual-
21-paper.pdf
In case you wish to visit the Noble & Noble website please scan
the QR code or Copy and Paste this link into the search bar:
https://www.noble-noble.com/
If you have any questions and/or suggestions there are two ways to contact us:
1.
First, please contact your authorized Noble & Noble dealer.
Noble & Noble maintains a network of dedicated dealers
who will be able to help you should you have any questions
and/or suggestions. Just scan the QR code or Copy and
Paste this link into the search bar:
https://www.noble-noble.com/where-to-buy
2.
Alternatively, you can contact us directly via the Contact Us
form on the website. Just scan the QR code or Copy and
Paste this link into the search bar:
https://www.noble-noble.com/contact-us

3
Table of contents
Subject Page
Accessories you will need to get the speakers playing …………….….. 4
How to loosen the transport screw ………………………………………… 5
How to get the speakers playing or the connections …………….……. 6
The source selection …………………………………………………………… 8
The features …………………………………………………………………….. 9
The Remote Control …………………………………………………………… 11
The speakers’ localization: Positioning and Leveling ………………..... 12
The running-in process ……………………………………………………… 18
How to clean the speakers ………………………………………….……….. 19
The technicalities ……………………………………………………………… 20
Troubleshooting …………………………………………………................... 22
Disclaimer …………………………………………………….…..................... 23
Please keep this User Manual in a safe place.
You may need it some time later on.

4
Accessories you will need to get the speakers playing
Inside one of the speaker cardboard boxes you will find these necessary accessories:
Quantity Item
1 User Manual.
Please read it fully and carefully before connecting your speakers.
2 White gloves for a better grip to take the speakers out of the
packaging.
1
Hex key / tool to unlock the transport screw at the back of each
speaker.
The chapter How to loosen the transport screw can be found on page 5.
1
Interlink, to go from one speaker to the other.
The chapter How to get the speakers playing or the connections can be
found on page 6.
2
Power Cords to power up the speakers.
The chapter How to connect the speakers to the power grid can be found
on page 6.
1 Remote control.
For the functions of the Remote Control please go to page 11.
8
Felt Discs.
Please see this User Manual, chapter Leveling, for more information.
You will find it on page 12.
2
Front spikes which each go into the 7th side of each speaker.
Please see this User Manual, chapter Positioning and Leveling, for more
information. You will find it on page 12.
1 Lint-free cloth to clean your speakers.
You will find more information on page 18.

5
How to loosen the transport screw
Before you go to the chapter “How to get the speakers playing or the connections”
please make sure that you have loosened the transport screw, located at the top
on the back side of the speaker, by turning it ± two times fully to the left in
order that the 7th side becomes loose and perfectly aligned with the rest of the
speaker.
FYI, the transport screw is the ONLY screw which needs to be touched / loosened!
DO NOT TAKE OUT / PUSH OR PULL the 7th side itself. The 7th side is fixed
inside the bottom plate and needs to stay that way. The transport screw is all
that should be loosened as mentioned above.
DO NOT TURN / LOOSEN any other screws such as the two mentioned below:
As mentioned on page 15 DO NOT screw or unscrew /
tighten or loosen the flange nut next to the spike
which you will find on the bottom plate.
As mentioned on page 6 DO NOT screw or unscrew /
tighten or loosen the flange nut next to the
connections plate which you will find on the back side.