NobleChairs EPIC Series User manual

EPIC Series - Assembly Instructions

Read over the manual before you begin.
Two people are suggested for assembly.
5x Caster 1x Hydraulic Gas Lift 1x Hydraulic Sleeve 2x Side Cover 2x Lever Cover
1x Wheel Base 1x Chair Base 1x Backrest
4x M8 Screw (30mm) with
pre-mounted Washers
1x Tilt Mechanism
1x Allen Key
2x Philips Head Screw
1x Neck Pillow 1x Lumbar Pillow
Screw Kit:
4x M8 Screw (20mm)
4x Split Washer
4x Washer
CONTENT CHECKLIST
1

Insert the 5 CASTERS into the WHEEL BASE.
Push firmly to lock them into place.
5Position the HYDRAULICS into the WHEEL BASE and place
the HYDRAULIC SLEEVE over it.
6
56
WHEELBASE INSTALLATION
4x
4x
Place the CHAIR BASE upside-down on a soft
surface and position the TILT MECHANISM in the
correct direction.
Place a SPLIT WASHER and then a WASHER onto
each of the 4 M8 SCREWS.
Install the TILT MECHANISM by diagonally tightening
the screws into the CHAIR BASE with the ALLEN KEY.
Place plastic LEVER COVERS onto metal handles,
align and push evenly into place.
1
1
2
2
3
3
4
4
TILT MECHANISM INSTALLATION
2

4x
Using the ALLEN KEY, unscrew the 4 M8 (30mm) pre-mounted
screws and washers on the side of the backrest.
Pull the lever up from the bottom so the mounting bracket snaps forward.
Keep your hands clear of the bracket because it can cause injury. Push
back the mounting bracket to a 90° angle for easier mounting.
9
9
10
10
BACKREST INSTALLATION
Align the top of the HYDRAULICS into the bottom of the
TILT MECHANISM.
78
7 8
CHAIRBASE INSTALLATION
Push and sit down to lock it into place.
3

Attach the NECK PILLOW by sliding
its elastic band around the headrest
of the chair.
PILLOWS
Attach the LUMBAR PILLOW by placing it at the base of
the chair. Feed its two elastic bands through the back of
the chair while feeding the other two elastic suspenders
over the shoulders of the chair. Snap to lock into place.
13 14
14
13
4x 2x
4x
Starting with the right side, attach the backrest to the metal
brackets with the 4 M8 (30mm) screws using the ALLEN KEY.
While firmly pushing SIDE COVERS into place, use the
ALLEN KEY to secure the SIDE COVERS with the 2 PHILIPS
HEAD SCREWS.
BACKREST INSTALLATION
11
11
12
12
4

Ensure that the armrests are balanced to your liking.
If not, adjust by loosening and tightening the screws with the
ALLEN KEY.
4D ARMREST ADJUSTMENTS
Use the right lever to adjust the chair’s height.
Use the appropiate function to adjust the armrests.
15
15
16
16
17
17
Turn the cylinder knob under the chair clockwise to tighten the
seat’s rockability and counterclockwise to loosen it. Adjust
according to your own weight.
Use the left lever to lock/unlock the tilt mechanism.
Use the appropiate function to adjust the armrests.
18
18
19
19
TILT ADJUSTMENT
5

Pull up on the lever and slowly lean back until the preferred
position is achieved.
SEATING ADJUSTMENT
20
20
Care Instructions
Keep noblechairs tidy by vacuuming its seams with a crevice tool.
Dust regularly using a clean, lint-free, slightly damp soft cloth and wipe the area clean.
Avoid direct sunlight and keep noblechairs away from heat sources to protect its leather.
Clean spills quickly. Blot away with a clean cloth, but do not rub.
Clean the casters by wiping off dirt with a scrub brush. Vacuum out dust caught inside of the wheels.
For further cleaning, pull off the wheels and wipe them down with a surface cleaner and a clean rag.
Push firmly to lock them back into place.
Safety Information
The maximum recommended user weight of the EPIC Series is up to 120kg or 264.5 pounds. Don’t use
noblechairs in an abusive manner. noblechairs is not liable for any damages resulting from improper
assembly and usage.
Return/Exchange Policy
The original packaging can be conveniently reused for a noblechairs return or exchange.
noblechairs accepts returns that are properly packaged.
6