Nobody Messes with... IT JT 100K User manual

1181 South Rogers Circle
Suite 18
Boca Raton, Florida 33487
e-mail [email protected]
www.jti-innovation.com
03/01/03
OPERATION
INSTRUCTIONS
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT
MAY CAUSE UNDESIRED OPERATION.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE
CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD
VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.

THIS SYSTEM INCLUDES
• Computerized control module
• A pair of three-button,Elusive CodeTM, icon labeled remote controls
• Wallet instruction card
• Manuals
• Warranty Registration Card
VERY IMPORTANT
JTI will warrant the control module to the original purchaser for a period of 36
months from the date of purchase. This warranty is effective only if your system
has been installed by an authorized JTI dealer. You must fill out and send in your
warranty card within 10 days of purchase to activate your warranty.
USING YOUR KEYLESS ENTRY SYSTEM
Locking
1. To lock the vehicle, press on the remote control once. The horn will honk
once and the parking lights will flash one time.
2. Automatic passive locking. Five seconds after the ignition has been turned off
the horn will honk once to indicate that the passive locking countdown has
begun. After an additional twenty seconds elapse, the vehicle will lock. To
prevent the system from passively locking, simply press two times
immediately after turning the ignition off, or wait until the vehicle passively locks
and then press one time. This will prevent / keep the system from
passively locking until the ignition is turned on and off again. NOTE: Passive
locking is a selectable feature that may be turned ON or OFF by your
authorized dealer / installer.
Unlocking
1. To unlock the vehicle, press on the remote control. The horn will honk
twice and the parking lights will flash twice.
Congratulations on your purchase of a Nobody Messes with..IT JT100K
keyless entry system. This system represents the most advanced and
reliable technology in vehicle convenience.
1

2-Step unlocking
The keyless entry system can be installed to unlock the doors in two steps.
Pressing will unlock only the driver’s door. If is pressed within the next
three seconds, the remaining doors will unlock.
Trunk release
The keyless entry system may be interfaced to the vehicle’s electric trunk
release. By pressing and holding for 3-seconds, the vehicle’s trunk will open.
If the trunk release feature is not used, this button may be used to control other
options (remote car starter, window roll up, etc.).
Starter disable
The keyless entry system can be connected to a starter disable mechanism
providing security by disabling the ability to start the engine during an
attempted break-in.
REMOTE BATTERY REPLACEMENT
The remote control is powered by a 12-volt battery that lasts approximately six
months to one year depending on the frequency of use. A weak remote battery
will be indicated by the following symptoms:
A) Remote control range decreases.
B) The LED on the remote goes dim.
If the battery needs to be replaced, please see your authorized JTI dealer.
User Selectable Quiet Mode
Your keyless entry system has the ability to be locked and unlocked silently (no
horn honks). To place the keyless entry into quiet mode, press and
simultaneously on the remote control for three seconds. The parking lights will
flash once to indicate you have placed the system into quiet mode. You may
then lock and unlock the system silently by pressing on the remote control.
Quiet mode does not affect the panic feature.
To take the keyless entry system out of quiet mode, press and
simultaneously on the remote control for three seconds. The parking lights
will flash twice to indicate that you have placed the system into normal
operating mode. You may then lock and unlock the system by pressing
on the remote control.
Panic Feature
You may panic the system by pressing for three seconds. This is done to
attract attention to your vehicle. The horn will sound for thirty seconds. Pressing
on the remote control will turn the panic feature off early.
Multi-Car Remote Operation
Your remote control remote control is also able to operate a second vehicle if
that vehicle is equipped with a Nobody Messes With..It Keyless Entry system.
Your authorized JTI dealer can program this feature.
Vehicle #1 will be the primary vehicle (all functions will operate).
Vehicle #2 will be the secondary vehicle ( on the remote control will
lock/unlock the vehicle, no other functions will be available from the primary
remote on the secondary vehicle).
OPTIONAL FEATURES
Ignition controlled door locks
The vehicle’s doors can be programmed to lock automatically when the vehicle’s
ignition is turned on and unlock automatically when the ignition is turned off. The
lock and unlock function can be programmed independently by your authorized
JTI installer/dealer.
Interior illumination
The keyless entry system may be interfaced to the vehicle’s interior lights. When
the keyless entry system is disarmed/unlocked, the vehicle’s interior lights will
turn on. The interior lights will turn off after 25-seconds, if the vehicle is locked
with the remote control, or if the ignition is turned on.
23

4
OPTIONAL ACCESSORIES
Remote engine start
An add-on remote car starter module allows you to start your vehicle via the
remote control. This module will allow you to keep the interior of your car warm in
the winter and cool in the summer.
Power trunk release
If your vehicle is not equipped with power trunk release, the JTI A-73 trunk
release kit can be added to provide remote controlled trunk release.
Power window control
The A-71 power window controller kit can be used to operate the vehicle’s power
windows with the JT-100K remote control.
TROUBLESHOOTING
Horn doesn’t honk when locking or unlocking - The keyless entry
system may have been placed into quiet mode. See User Selectable Quiet
Mode.