Nokia NRB0002000 - Intellisync Call Connect User manual

Part Number: N450000596 Rev 003
Published December 2008
Call Connect for Cisco
Web Directory
Installation Guide
Version 1.0

2 Nokia Call Connect for Cisco Web Directory Installation Guide
COPYRIGHT
The contents of this document are proprietary and confidential property of Nokia Corporation and its affiliates ("Nokia").
This document is intended for use by Nokia's customers and collaborators only for the purpose for which this document
is supplied by Nokia and for the use(s) specifically authorized in the applicable written agreement under which this
document is supplied. This document is provided subject to confidentiality obligations of the applicable agreement(s).
No part of this document may be reproduced or made available to the public or to any third party in any form or means
without the prior written permission of Nokia. This document is to be used by properly trained professional personnel.
Nokia operates a policy of ongoing development. Nokia reserves the right to make changes and improvements to any of
the products and/or services described in this document or withdraw this document at any time without prior notice.
The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind,
either express or implied, including, but not limited to, the implied warranties of merchantability, non-infringement and
fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. NOKIA
SHALL NOT BE RESPONSIBLE IN ANY EVENT FOR ERRORS IN THIS DOCUMENT OR FOR ANY LOSS OF DATA
OR INCOME OR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, INDIRECT OR DIRECT DAMAGES HOWSOEVER
CAUSED, that might arise from the contents or use of this document.
This document and the product(s) and services it describes are protected by copyright and other intellectual property
rights according to applicable laws. No license, express or implied, by estoppels or otherwise to any intellectual property
rights is granted herein.
Nokia and Eseries are trademarks or registered trademarks of Nokia Corporation. Other product and company names
mentioned herein may be trademarks or trade names of their respective owners.
Copyright © Nokia Corporation 2008. All rights reserved.
Document History
Document Part Number Publication Date
N450000596 Rev 001 October 2007
N450000596 Rev 002 December 2007
N450000596 Rev 003 December 2008
050602

Nokia Call Connect for Cisco Web Directory Installation Guide 3
Contents
About This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
In This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Conventions This Guide Uses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Command-Line Conventions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Text Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
1 Introducing Nokia Call Connect for Cisco Web Directory . . . . . . . . . . . . . . . . . . 9
Using Nokia Call Connect for Cisco Web Directory . . . . . . . . . . . . . . . . . . . . . . . . . 10
Searching for Users. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Listing Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Calling Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2 Installing and Configuring Nokia Call Connect for Cisco Web Directory . . . . 13
Cisco CallManager v4.1.3 - v4.3.x . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Minimum System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Installing Nokia Call Connect for Cisco Web Directory . . . . . . . . . . . . . . . . . . . . . 14
Configuring Nokia Call Connect for Cisco Web Directory . . . . . . . . . . . . . . . . . . . 14
Configuring Cisco CallManager. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Cisco Unified Communications Manager v5.x and 6.x. . . . . . . . . . . . . . . . . . . . . . . 16
Minimum System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Limitations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Installing Nokia Call Connect for Cisco Web Directory . . . . . . . . . . . . . . . . . . . . . 17
Configuring Nokia Call Connect for Cisco Web Directory . . . . . . . . . . . . . . . . . . . 17
Configuring Cisco Unified Communications Manager. . . . . . . . . . . . . . . . . . . . . . 19

4 Nokia Call Connect for Cisco Web Directory Installation Guide

Nokia Call Connect for Cisco Web Directory Installation Guide 5
About This Guide
This guide describes how to install and configure Nokia Call Connect for Cisco Web Directory.
The information in this guide is intended for system administrators.
This preface provides the following information:
In This Guide
Conventions This Guide Uses
In This Guide
This guide contains the following chapters:
Chapter 1, “Introducing Nokia Call Connect for Cisco Web Directory” provides an overview
of the Nokia Call Connect for Cisco Web Directory.
Chapter 2, “Installing and Configuring Nokia Call Connect for Cisco Web Directory”
describes how to install and configure Web Directory.
Conventions This Guide Uses
The following sections describe the conventions this guide uses, including notices, text
conventions, and command-line conventions.
Notices
Note
Notes provide information of special interest or recommendations.
Command-Line Conventions
This section defines the elements of commands that are available in Nokia Call Connect for
Cisco Web Directory. You might encounter one or more of the following elements on a
command-line path.

6 Nokia Call Connect for Cisco Web Directory Installation Guide
Text Conventions
Table 2 describes the text conventions this guide uses.
Table 1 Command-Line Conventions
Convention Description
command This required element is usually the product name or other short
word that invokes the product or calls the compiler or preprocessor
script for a compiled Nokia product. It might appear alone or
precede one or more options. You must spell a command exactly
as shown.
Italics Indicates a variable in a command that you must supply. For
example:
delete interface if_name
Supply an interface name in place of the variable. For example:
delete interface nic1
Square brackets [ ] Indicates optional arguments.
https://host_name[:port]
For example:
https://company.com:443
-flag A flag is usually an abbreviation for a function, menu, or option
name, or for a compiler or preprocessor argument. You must enter
a flag exactly as shown, including the preceding hyphen.
( . , ; + * - / ) Punctuation and mathematical notations are literal symbols that
you must enter exactly as shown.
""Quotation marks are literal symbols that you must enter as shown.
Table 2 Text Conventions
Convention Description
monospace font Indicates command syntax, or represents computer or screen
output, for example:
Log error 12453
bold monospace font Indicates text you enter or type, for example:
# configure nat
Key names Keys that you press simultaneously are linked by a plus sign (+):
Press Ctrl + Alt + Del.

Conventions This Guide Uses
Nokia Call Connect for Cisco Web Directory Installation Guide 7
Menu commands Menu commands are separated by a greater than sign (>):
Choose File > Open.
The words enter and type Enter indicates you type something and then press the Return or
Enter key.
Do not press the Return or Enter key when an instruction says
type.
Italics •Emphasizes a point or denotes new terms at the place where
they are defined in the text.
•Indicates an external book title reference.
•Indicates a variable in a command:
delete interface if_name
Table 2 Text Conventions (continued)
Convention Description

8 Nokia Call Connect for Cisco Web Directory Installation Guide

Nokia Call Connect for Cisco Web Directory Installation Guide 9
1Introducing Nokia Call Connect for
Cisco Web Directory
Nokia Call Connect for Cisco Web Directory allows Call Connect users to search and call other
Cisco Unified Communications Manager users. Users can access Web Directory either directly
from Call Connect or from a phone browser.
Nokia Call Connect for Cisco Web Directory is delivered as an example service that you can
install on a Windows server. Call Connect launches the device browser by using a predefined
URL and the same WLAN access point that it uses to register to Cisco Unified Communications
Manager.
Note
In S60 v3.0 devices, only one browser session can be open at a time.
Figure 1 Nokia Call Connect for Cisco Web Directory
Nokia Call Connect for Cisco Web Directory lists all Cisco Unified Communications Manager
users and their extension numbers. The icons next to user names indicate the availability of the
users for communication. You can list either all users or only users who are currently online.
Table 3 describes the meaning of the icons.

1Introducing Nokia Call Connect for Cisco Web Directory
10 Nokia Call Connect for Cisco Web Directory Installation Guide
Using Nokia Call Connect for Cisco Web Directory
Users can access Nokia Call Connect for Cisco Web Directory either directly from Call Connect
or from the phone browser.
Figure 2 Nokia Call Connect
To allow users to access Nokia Call Connect for Cisco Web Directory from Call Connect,
specify the Nokia Call Connect for Cisco Web Directory URL, http://server_IP_address/Eseries/
directory/, in mobile devices, as follows:
In S60 v3.1 devices, such as Nokia E51 and Nokia E90, specify the URL in SCCP settings.
In S60 v3.0 devices, deliver the URL to devices in a text file called ICCC_settings.txt that
you copy to the C:\Data\others\Intellisync folder.
You can deliver the device MAC address to Nokia Call Connect for Cisco Web Directory as a
part of the URL to identify users and to provide personalized services for them. Specify the URL
as follows:
http://server_IP_address/my_cucm_service/mymac=<MAC>
Nokia Call Connect resolves the MAC address of the device and uses it to redirect the user to
personalized services.
Table 3
Icon Meaning
User is online. The device is registered to Cisco Unified Communications Manager.
User is online but has enabled call forwarding.
User is offline. The device is not registered to Cisco Unified Communications Manager.
User is offline and has enabled call forwarding.

Using Nokia Call Connect for Cisco Web Directory
Nokia Call Connect for Cisco Web Directory Installation Guide 11
To access Nokia Call Connect for Cisco Web Directory
Select Menu > Installat. > NICC for Cisco > Online Services.
Use the phone browser to access the following addresses:
http://server_IP_address/Eseries/directory/
http://server_DNS_name/Eseries/directory/
Searching for Users
You can search for users in Nokia Call Connect for Cisco Web Directory.
To search for users from Nokia Call Connect for Cisco Web Directory
1. Enter a search string in the field.
Wildcards are automatically added to the end of the search string. When searching from
Cisco Unified Communications Manager v5.x or v6.x, wildcards are also added to the
beginning of the search string.
2. Select Search.
Listing Users
Nokia Call Connect for Cisco Web Directory lists all users from Cisco Unified Communications
Manager. To make the list shorter, you can select to list only online users. That is, users who are
currently registered to Cisco Unified Communications Manager.
To list users in Nokia Call Connect for Cisco Web Directory
Click List All Users to list all Cisco Unified Communications Manager users.
Click List Online Users to list users who are currently registered to Cisco Unified
Communications Manager.
Calling Users
You can call Cisco Unified Communications Manager users from Nokia Call Connect for Cisco
Web Directory.

1Introducing Nokia Call Connect for Cisco Web Directory
12 Nokia Call Connect for Cisco Web Directory Installation Guide
Figure 3 Calling from Nokia Call Connect for Cisco Web Directory
To call users from Nokia Call Connect for Cisco Web Directory
1. Select a user in Nokia Call Connect for Cisco Web Directory.
2. Select Yes.
3. In the Call Type list, select Internet Call.
4. Select Call.

Nokia Call Connect for Cisco Web Directory Installation Guide 13
2Installing and Configuring Nokia Call
Connect for Cisco Web Directory
This chapter describes how to install and configure Nokia Call Connect for Cisco Web Directory
for use with the following Cisco Unified Communications Manager versions:
Cisco CallManager v4.1.3 - v4.3.x
Cisco Unified Communications Manager v5.x and 6.x
Cisco CallManager v4.1.3 - v4.3.x
You can install and run Nokia Call Connect for Cisco Web Directory either on the Cisco
CallManager server or on a Windows 2000 or 2003 Server, as described in the following
sections:
Minimum System Requirements
Limitations
Installing Nokia Call Connect for Cisco Web Directory
Configuring Nokia Call Connect for Cisco Web Directory
Configuring Cisco CallManager
Minimum System Requirements
You need the following hardware and software to install and run Nokia Call Connect for Cisco
Web Directory:
Cisco CallManager v4.1.3 - v4.3.x
Windows 2000 SP3 or later or Windows 2003 server with IIS installed (optional)
Nokia Eseries devices

2Installing and Configuring Nokia Call Connect for Cisco Web Directory
14 Nokia Call Connect for Cisco Web Directory Installation Guide
Limitations
The following limitations apply to using Nokia Call Connect for Cisco Web Directory with
Cisco CallManager v4.1.x:
Nokia Call Connect for Cisco Web Directory fetches the information to display and searches
from the Phone Description field or Line Alerting Name field.
Nokia Call Connect for Cisco Web Directory lists only phones the names of which begin
with the string SEP.
Installing Nokia Call Connect for Cisco Web Directory
Nokia Call Connect for Cisco Web Directory is delivered to you as an MSI package. Nokia
recommends that you install Web Directory on a separate Windows server if the Cisco
CallManager CPU is already heavily loaded.
To install Nokia Call Connect for Cisco Web Directory
1. Double-click Nokia Eseries Directory.msi.
The Welcome page opens.
2. Click Next.
The Select Installation Address page opens.
3. When installing on the Cisco CallManager, select a Web site in the Site list.
4. Click Next.
The Confirm Installation page opens.
5. Click Close.
6. Configure Nokia Call Connect for Cisco Web Directory as described in the following
section.
Configuring Nokia Call Connect for Cisco Web Directory
Use the Nokia Call Connect for Cisco Web Directory configuration tool to specify settings for
Web Directory. The settings are stored in the Web Directory configuration file,
C:\Inetpub\wwwroot\Eseries\Directory\Settings\settings.txt. Specify Cisco CallManager address
and version, administrator user name and password, and search options. The password is
encrypted before storing.

Cisco CallManager v4.1.3 - v4.3.x
Nokia Call Connect for Cisco Web Directory Installation Guide 15
To configure Nokia Call Connect for Cisco Web Directory
1. Start Nokia Eseries Directory.exe from the C:\Inetpub\wwwroot\Eseries\Directory\Settings
directory.
The Nokia Eseries Directory Settings dialog opens:
2. In the IP Address field, enter the IP address or fully-qualified domain name of the Cisco
CallManager Publisher server.
3. In the Version of CallManager Server field, select 4.1.3 - 4.3.x.
4. In the Administrator User’s Username field, enter the user name of the Cisco CallManager
administrator.
5. In the Administrator User’s Password field, enter the password of the Cisco CallManager
administrator.
6. In the Select the Field to Search and to Display the Information From field, select Line’s
Alerting Name Field.
7. Select the Enable the List All Link and Function option to allow users to list all Cisco
CallManager users in Nokia Call Connect for Cisco Web Directory.

2Installing and Configuring Nokia Call Connect for Cisco Web Directory
16 Nokia Call Connect for Cisco Web Directory Installation Guide
8. Select the Enable the List Online Link and Function option to allow users to list only
registered users in Nokia Call Connect for Cisco Web Directory.
9. Select the Extension Mobility is Enabled on CallManager option.
10. Optionally, in the Prefix for the Numbers field, specify a prefix for the numbers to call.
11. Click Save Settings.
Configuring Cisco CallManager
The Cisco CallManager configuration determines whether the search results are useful. You can
use either the Line Alerting Name or Phone Description field to search from and to fetch user
names from. If you use the Line Alerting Name to search and display from, Nokia Call Connect
for Cisco Web Directory displays the user information as follows:
Alerting name (Line number)—John Doe (332)
If you specify that Nokia Call Connect for Cisco Web Directory searches from the Phone
Description field, enter useful information into the field. For example:
Line number, first name last name—332, John Doe
Last name, first name (line number)—Doe, John (332)
You do not have to include the line number in the description field as the tel: URL uses the line
number.
Cisco Unified Communications Manager v5.x and 6.x
You can install and run Nokia Call Connect for Cisco Web Directory on a Windows 2000 or
2003 Server, as described in the following sections:
Minimum System Requirements
Limitations
Installing Nokia Call Connect for Cisco Web Directory
Configuring Nokia Call Connect for Cisco Web Directory
Configuring Cisco Unified Communications Manager
Minimum System Requirements
You need the following hardware and software to install and run Nokia Call Connect for Cisco
Web Directory:
Cisco Unified Communications Manager v5.x or 6.x
Cisco AXL Web Service must be activated on the Cisco Unified Communications Manager
Publisher server
Windows 2000 SP3 or later or Windows 2003 server with IIS installed
Nokia Eseries devices

Cisco Unified Communications Manager v5.x and 6.x
Nokia Call Connect for Cisco Web Directory Installation Guide 17
Limitations
The following limitations apply to using Nokia Call Connect for Cisco Web Directory with
Cisco Unified Communications Manager v5.x or 6.x:
You cannot install Nokia Call Connect for Cisco Web Directory on the Cisco Unified
Communications Manager server.
Nokia Call Connect for Cisco Web Directory uses the End User directory, but lists only
entries where the Line and Device are configured for Telephone Number.
Installing Nokia Call Connect for Cisco Web Directory
Nokia Call Connect for Cisco Web Directory is delivered to you as an MSI package. Install
Nokia Call Connect for Cisco Web Directory on a Windows server.
To install Nokia Call Connect for Cisco Web Directory
1. Double-click Nokia Eseries Directory.msi.
The Welcome page opens.
2. Click Next.
The Select Installation Address page opens.
3. In the Site list, select a Web site and click Next.
The Confirm Installation page opens.
4. Click Close.
5. Configure Nokia Call Connect for Cisco Web Directory as described in the following
section.
Configuring Nokia Call Connect for Cisco Web Directory
Use the Nokia Call Connect for Cisco Web Directory configuration tool to specify settings for
Web Directory. The settings are stored in the Web Directory configuration file,
C:\Inetpub\wwwroot\Eseries\Directory\Settings\settings.txt. Specify Cisco Unified
Communications Manager address and version, administrator user name and password, and
search options. The password is encrypted before storing.

2Installing and Configuring Nokia Call Connect for Cisco Web Directory
18 Nokia Call Connect for Cisco Web Directory Installation Guide
To configure Nokia Call Connect for Cisco Web Directory
1. Start Nokia Eseries Directory.exe from the C:\Inetpub\wwwroot\Eseries\Directory\Settings
directory.
The Nokia Eseries Directory Settings dialog opens:
2. In the IP Address field, enter the IP address or fully-qualified domain name of the Cisco
Unified Communications Manager Publisher server.
3. In the Version of CallManager Server field, select 5.x or 6.x.
4. In the Administrator User’s Username field, enter the user name of the Cisco Unified
Communications Manager administrator.
5. In the Administrator User’s Password field, enter the password of the Cisco Unified
Communications Manager administrator.
6. Select the Enable the List All Link and Function option to allow users to list all Cisco
Unified Communications Manager users in Nokia Call Connect for Cisco Web Directory.
7. Select the Enable the List Online Link and Function option to allow users to list only
registered users in Nokia Call Connect for Cisco Web Directory.

Cisco Unified Communications Manager v5.x and 6.x
Nokia Call Connect for Cisco Web Directory Installation Guide 19
8. Optionally, in the Prefix for the Numbers field, specify a prefix for the numbers to call.
9. Click Save Settings.
Configuring Cisco Unified Communications Manager
The Cisco Unified Communications Manager configuration determines whether the search
results are useful. Nokia Call Connect for Cisco Web Directory searches from the following
fields in the End User directory:
Last Name
First Name
Phone Number
Therefore, you must enter information to these fields the End User Directory when you create
users. The Phone Number field must contain the user’s line number.

2Installing and Configuring Nokia Call Connect for Cisco Web Directory
20 Nokia Call Connect for Cisco Web Directory Installation Guide