NOMA 151-2737-6 User manual

LIGHTED TREE
model no. 151-2737-6 | Toll-free number: 1-866-827-4985
3. Carefully insert the tree body into the assembled stand. Make sure the pole is firmly inserted into stand.
4. Shape the branches. Shift branches to fill any gaps, lightly upsweep all branch tips for a uniform look. Your tree is now ready to
decorate.
5. Plug the cord into wall outlet.
1. Before you start to assemble your tree, choose an appropriate location near a wall outlet.
2. Assemble the tree stand and place on a level surface.(See Fig. A.)
Carefully follow the instructions below to quickly and easily set up your new tree.
Insert plug
into wall
outlet
*Electrical rating for the tree
(For indoor use only)
0.02 A, 120 V, 60 Hz
Fig. B - Tree and Light Assembly
TREE ASSEMBLY INSTRUCTIONS
Instruction Manual
For indoor use only
Retain carton for storage purposes
IMPORTANT: Please read this manual carefully before assembly and save it for reference.
Insert and slide the legs
upward into the slots of the
base until firmly secured.
Fig. A - Tree Stand Assembly

1. Unplug light string from the wall outlet and remove all ornaments and decorations.
2. Gently lift the tree body up from the tree stand.
3. Carefully place the tree into shipping box and tape it shut.
4. When not in use, please store your tree in a cool, dry place away from sunlight. Exposing your tree to excessive heat or humidity
may damage your tree.
STORAGE INSTRUCTIONS
For pre-lit trees, if the tree does not illuminate
1. Please check to make sure that all plugs are properly connected according to the colour labels indicated in Fig. B and that the
power cord is plugged into the wall outlet. Refer to assembly guide for instructions.
2. Please check for loose, broken or missing light bulbs and replace as needed.
Each tree includes hinge pins/washers, and for pre-lit trees, spare bulbs and fuses are also included. If extra parts are needed,
please contact our customer service centre.
SPARE PARTS
Troubleshooting
This product carries a one (1) year warranty against defects in workmanship and materials. Noma Canada agrees to replace a
defective product, within the stated warranty period, when returned to the place of purchase with proof of purchase.This product
is not guaranteed against wear or breakage due to misuse and/or abuse.
Made in China
Imported by
Noma Canada,Toronto, Canada M4S 2B8
DATE CODE / DATE DE CODE: 22318
• Grasp plug and remove from the receptacle or other outlet device.Do not unplug by pulling on the cord.
• Open fuse cover. Slide the fuse access cover on top of attachment plug toward blades.
• Remove fuse carefully.
• Risk of fire. Replace fuse with only a 3 Amp, 125 volt fuse (provided in the replacement bag).
• Close fuse cover. Slide the fuse access cover on top of attachment plug away from the blades.
CAUTION: Risk of fire. Do not replace attachment plug.
Do not remove the safety device (fuse). Discard product if the attachment plug is damaged.
Replace the fuse.
Warranty