NOMA 151-7109-2 User manual

T
roubleshooting
Multi-Function Silver Glittered Tree
Instruction Manual
For indoor use only
Retain carton for storage purposes
model no. 151-7109-2 Toll-free number: 1.866.827.4985
IMPORTANT: Please read this manual carefully before assembly and save it for reference.
ASSEMBLY:
1) This product comes packed in four pieces: the bottom section of the tree, the middle
section of the tree, the treetop and the stand.
2) Place the base on a sturdy surface and unwind the STAND , insert the tree bottom
section into the hole of the
STAND . Tighten the screw to keep the STAND stable.
And then insert the tree middle and tree top sections as per Fig A. The branches of
middle and bottom section are hinged and will fold down easily.
3) Shape the tree by arranging the branches into the desired position. Finished look
should be natural-looking and full.
4) Three light chains are pre-decorated on the 3 sections of the tree.
5) Connect the chains by fitting the male and female connectors with same letter of
indicator (total: 2 pair of connectors, you can easily find them between the tree
sections) and screw the plastic cap on (see Fig A, B). Ensure that the connectors are
securely tightened.
6) Connect the plug of the light sets to the power supply. Check that all bulbs are lit.
The control box allows access to 8 light functions.
7) Your tree is ready to be decorated and enjoyed.
SHAPING: The tree is shipped from the factory with the tips of each branch
compressed to the
centre. Each branch tipmust be shaped to its proper positionto give
thetree a naturallook. Thisis done bygently graspingthebranchtipsandspreadingthem
outaway fromthe centre
of the tree, working from the bottom up.
STORAGE: Branch tips should be carefully pressed back towards centre when tree is disassembled for
storage. Store in original carton in a cool, dry location protected from sunlight.
Press the control box to get the different effect:
1. Combination
2. In waves
3. Sequential
4. Slo-Glo
5. Chasing/Flash
6. Slow fade
7. Twinkle/Flash
8. Steady on
If the lights do not work:
1) Ensure the power outlet is working correctly.
2) Ensure the male and female connectors on the tree are properly connected.
3) Check that the jack plug on the light chain is connected to the transformer.
Specialty
Troubleshooting
Fig A
Fig B

Caution
! CAUTION:
1. For indoor use only.
2. Keep away from any source of flame or heat.
3. This is a Christmas decoration. This is not a toy. Keep out of the hands of small children.
4. This product is NOT designed for permanent or long-term use.
5. Only operate this product with the transformer supplied.
6. Do not connect this chain electrically to another product.
7. Do not operate this product in the packaging.
8. Bulbs are non replaceable.
9. DO NOT attempt to replace the non-replaceable bulbs in this product.
10. Do not position a Christmes tree or decoration near gas, electric heaters, fireplaces, candles or other sources of heat.
11. Take care not to damage the cable or fittings.
12. If part of the light set or cable is damaged the product MUST be destroyed.
13. Always switch off decorative lights overnight or if unattended. DO NOT overload power sockets or extension cables.
14. Place your tree on a level surface that will not be damaged by the tree or decorations that could detach.
15. DO NOT pierce the cable when securing in place, bend or stand on the light chain, as this will damage the bulbs or
wiring.
Care & Use:
1. When disassembling the tree, start from the top and work your way down.
2. Store the complete tree in its carton in a cool dry area.
ThisNoma
®
productcarriesaone(1)yearwarrantyagainstdefectsinworkmanshipand
materials.
NomaCanada agreestoreplace a defective product,withinthestatedwarranty
period,when returned to the place of purchase with proof of purchase. This product is not
guaranteed against
wearorbreakageduetomisuseand/orabuse.
CAN ICES-005 (B) / NMB-005 (B)
MADEINCHINA
ImportedbyNomaCanada
Toronto,Canada M4S2B8
Warranty
Care & Use