NOMA 151-4417-6 User manual

1
1-PLUG 1-MINUTE
Self Shaping LED Snowfall Spruce Tree
151-4417-6
INSTRUCTION MANUAL
Thank you for purchasing this pre-lighted tree. This tree assembles in less than one minute and is decorated with CSA-listed
miniature light sets. For your convenience, it is equipped with a foot pedal switch for easy illumination.
This 7' tree is pre-strung with 500 lights:
CARTON INCLUDES:
•3 pre-lighted tree sections (A – Top Section, B – Middle Section, C – Bottom Section)
•1 sturdy metal tree stand
•1 screw for tree stand
•8 extra 3 V LED replacement bulbs
FOR INDOOR/SEASONAL USE ONLY
ASSEMBLY INSTRUCTIONS FOR TREE STAND
1. Place the Tree Base (D) on a level surface. Unfold the base and make sure each leg is at an even angle and
insert the screw into the hole and tighten according to the instructions.
2. The stand has a control box and a foot pedal switch. The foot pedal switch is for choosing different functions
and for easy illumination. This tree is colour-changing. Just press the button on the foot pedal switch to change
functions. The 2 lighting options available are steady or cascading.
ASSEMBLY INSTRUCTIONS FOR TREE
1. Before you start to assemble the tree, choose an appropriate location near a grounded outlet.
2. Assemble the tree from the bottom to the top, according to the assembly instructions.
3. Carefully insert the bottom section (C) of the tree into the tree base vertically as illustrated in Figure 1. Rotate
the bottom section (C) right or left until it falls into place, then insert vertically and tightly into the tree base to
ensure proper circuit connection.
4. Insert the middle section (B) of the tree into the bottom section (C) vertically as illustrated in Figure 2. Rotate
the middle section (B) right or left until it falls into place, then insert vertically and tightly into the bottom section (C)
to ensure proper circuit connection.

2
5. Insert the top section (A) into the middle section (B) vertically as illustrated in Figure 3. Rotate the top section
(A) right or left until it falls into place, then insert vertically and tightly into the middle section (B) to ensure proper
circuit connection.
6. Allow the branches to fall into place or gently pull branches up and out. When adjusting branches, be sure
that all wires are free of branch hinges. (See Figure 4)
7. Shape the branches. Starting with tips closest to the pole, shape one tip to the right, one to the left and one
along the centre of the main stem. Repeat pattern for each branch. (See Figure 5)
HOW TO USE THE CONTROL BOX:
Rotate the SPEED CONTROL knob to determine the speed of the function selected
Push MULTI FUNCTION button to select the motion effect you desired.
TROUBLESHOOTING (if lights do not work):
1. If entire tree does not light, make sure the plug is securely inserted into a working electrical
outlet.
2. If an entire section of the tree does not light:
Make sure each section of the tree is well connected.
3. If plug does not fit:
This product contains a cord with a polarized plug (one prong is wider than the other) as a
feature to reduce the risk of electrical shock. This plug will fit in a polarized outlet only one
way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact
a qualified electrician. Do not use with an extension cord unless the plug can be fully
inserted. Do not alter or replace the plug.
Fig. 4 Fig. 5

3
CAUTION! – ALWAYS UNPLUG YOUR TREE FROM ITS POWER
SOURCE BEFORE ATTEMPTING BULB REPLACEMENT.
USER SERVICING INSTRUCTIONS
BULB REPLACEMENT:
1. Grasp plug and remove from its power source.
2. Remove the reflector from the bulb. (See Fig. 1)
3. Pull bulb straight out of socket. Do not twist bulbs. (See Fig. 2)
4. Replace burned-out bulb with 3.0/2.0 V, 0.06/0.04 W LED bulb ONLY. Directly insert the LED bulb into the
bulb holder. (Additional bulbs are included for your convenience.) (See Fig. 3)
5. If the bulb still does not light, change the LED bulb’s direction in the bulb holder. (See Fig. 4)
6. Replace the reflector on the LED bulb. (See Fig.5)
Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5
IMPORTANT SAFETY INSTRUCTIONS
a)READ AND FOLLOW ALL SAFETY INSTRUCTIONS
b) Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products
are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If
one is not provided, contact a qualified electrician for proper installation.
c) This seasonal use product is not intended for permanent installation or use.
d) Do not mount or place near gas or electric heaters, fireplaces, candles or other similar sources of heat.
e) Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
f) Do not let bulbs rest on the supply cord or on any wire.
g) Unplug the product when leaving the house, or when retiring for the night, or if left unattended.
h) This is an electrical product – not a toy! To avoid risk of fire, burns, personal injury and electric shock it should
not be played with or placed where small children can reach it.
i) Do not use this product for other than its intended use.
j) Do not hang ornaments or other objects from cord, wire, or light string. Hang ornaments only on the tree itself.
k) Do not close doors or windows on the product or extension cords as this may damage the wire insulation.
l) Do not cover the product with cloth, paper or any material not part of the product when in use.
m) This product is equipped with push-in type bulbs. Do not twist bulbs.
n) This product has a polarized plug (one blade is wider than the other) as a feature to reduce the risk of electric
shock. This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified electrician. Do not use with an extension cord unless plug can be
fully inserted. Do not alter or replace the plug.
o) Read and follow all instructions that are on the product or provided with the product.
i. SAVE THESE INSTRUCTIONS
USE AND CARE INSTRUCTIONS

4
a) Before using or reusing, inspect product carefully. Discard any products that have cut, damaged, or frayed
wire insulation or cords, cracks in the bulb holders or enclosures, loose connections, or exposed copper wire.
b) When storing the product, carefully remove the product from wherever it is placed to avoid any undue strain or
stress on the product conductors, connections, and wires.
c) When not in use, store neatly in a cool, dry location protected from sunlight.
STORAGE: Disassembled tree can be stored in its original box. Store tree in a cool dry place where the temperature does
not exceed 100 °F (38 °C).
Noma®is a registered trademark of Noma Company and is used under licence.
Limited 1-year Warranty
This Noma®product carries a one (1) year warranty against defects in workmanship and materials. Trileaf Distribution
agrees to replace a defective product, within the stated warranty period, when returned to the place of purchase with proof
of purchase. This product is not guaranteed against wear or breakage due to misuse and/or abuse
Made in China
Imported by/
Trileaf Distribution Trifeuil Toronto, Canada M4S 2B8