NordicTrack C 900 User manual

For detailed instructions, see the User’s Manual. Note: There may be an oily substance on the exterior of the
treadmill. If there is an oily substance on the treadmill, simply wipe it off with a soft cloth and a mild, non-abrasive
cleaner.
NORDICTRACK® C 900 • Model No. 831.24959 • Revised 9/19/12
QUICK ASSEMBLY GUIDE
#8 x 3/4" Screw
(2)–2
3/8" Star
Washer (13)–4
3/8" Nut (12)–2
5/16" Star
Washer (11)–8
#10 x 3/4" Screw
(9)–4
3/8" x 2 1/4" Screw (7)–4
3/8" x 1 3/4" Bolt (6)–1 3/8" x 2" Bolt (3)–1
#8 x 1/2" Ground
Screw (10)–1
#8 x 1/2"
Screw (1)–16
3/8" x 1 1/4"
Screw (8)–4
5/16" x 1 1/2"
Bolt (4)–4
5/16" x 3/4"
Screw (4)–4
5/16" x 2 3/4"
Screw (28)–4
#10 Star
Washer (5)–4

2
3. Attach the Left Upright (89) and the Right
Upright (not shown). Slide the Left and Right
Base Covers (not shown) onto the Uprights.
4. Attach both handrail assemblies.
1. Pull the Upright Wire (81) through the Base (94).
Attach the ground wire (A).
2. Route the Upright Wire (81) through the Left
Upright (89).
81
94
Hole
Square
Hole
10
A
77
Cut
81
81
Wire
Tie
89
81
89
94
8
7
13
13
28
11
81
C

3
8. Attach the Inside Upright Covers (88, 95).
6. Attach the Trays (27, 36).
5. Remove screws and the Pulse Crossbar (93)
from the Console Base (64).
64
93
E
104
4
4
27
36
104
11
1
1
1
96
1
1
87
7. Attach the Outside Upright Covers (87, 96).
88
95 2
2
9
9
5
5
28
28
93
9. Attach the Pulse Crossbar (93).

13. Attach the lower end of the Storage Latch (53).
NORDICTRACK is a registered trademark of ICON IP, Inc.
Part No. 339843 R0912A Printed in USA © 2012 ICON IP, Inc.
11. Attach the console assembly.
10. Connect the console wires.
81
Wire
Tie
Console
Wire
105
Ground
Wire
4
4
11 11
12. Attach the Pulse Crossbar (93) to the console
assembly.
93
44
11
1
53
12 6
53
Latch
Knob
12
3
14. Attach the upper end of the Storage Latch (53).