NordicTrack T8.0 Treadmill User manual

USERʼS MANUAL
Model No. NETL79711.0
Serial No.
Write the serial number in the space
above for reference.
QUEST ONS?
If you have questions, or if there are
missing parts, please contact us:
UK
Call: 08457 089 009
From reland: 053 92 36102
Website: www.iconsupport.eu
E-mail: [email protected]
Write:
CON Health & Fitness, Ltd.
c/o H Group PLC
Express Way
Whitwood, West Yorkshire
WF10 5QJ, UK
AUSTRAL A
Call: 1-800-237-173
E-mail:
[email protected]
CAUT ON
Read all precautions and instruc-
tions in this manual before using
this equipment. Save this manual
for future reference.
Serial Number
Decal
www.iconeurope.com

TABLE OF CONTENTS
WARNINGDECALPLACEMENT..............................................................2
IMPORTANTPRECAUTIONS ................................................................3
BEFOREYOUBEGIN ......................................................................5
ASSEMBLY...............................................................................6
OPERATIONANDAD USTMENT ............................................................13
HOWTOFOLDANDMOVETHETREADMILL ..................................................22
TROUBLESHOOTING .....................................................................23
EXERCISEGUIDELINES ...................................................................26
PARTLIST ..............................................................................27
EXPLODEDDRAWING ....................................................................28
ORDERINGREPLACEMENTPARTS ..................................................BackCover
RECYCLINGINFORMATION.........................................................BackCover
This drawing shows the locations of the warning
decals. f a decal is missing or illegible, call
the telephone number on the front cover of
this manual and request a free replacement
decal. Apply the decal in the location shown.
Note: The decals may not be shown at actual
size.
WARN NG DECAL PLACEMENT
2
NORDICTRACK is a registered trademark of ICON IP, Inc.

3
1. Before beginning any exercise program, con-
sult your physician. This is especially impor-
tant for persons over age 35 or persons with
pre-existing health problems.
2. t is the responsibility of the owner to ensure
that all users of this treadmill are adequately
informed of all warnings and precautions.
3. Use the treadmill only as described.
4. Keep the treadmill indoors, away from mois-
ture and dust. Do not put the treadmill in a
garage or covered patio, or near water.
5. Place the treadmill on a level surface, with at
least 8 ft. (2.4 m) of clearance behind it and 2
ft. (0.6 m) on each side. Do not place the
treadmill on any surface that blocks air open-
ings. To protect the floor or carpet from dam-
age, place a mat under the treadmill.
6. Do not operate the treadmill where aerosol
products are used or where oxygen is being
administered.
7. Keep children under age 12 and pets away
from the treadmill at all times.
8. The treadmill should be used only by persons
weighing 300 lbs. (136 kg) or less.
9. Never allow more than one person on the
treadmill at a time.
10. Wear appropriate exercise clothes when
using the treadmill. Do not wear loose clothes
that could become caught in the treadmill.
Athletic support clothes are recommended
for both men and women. Always wear ath-
letic shoes. Never use the treadmill with bare
feet, wearing only stockings, or in sandals.
11. When connecting the power cord (see page
13), plug the power cord into an earthed cir-
cuit. No other appliance should be on the
same circuit. When replacing the fuse in the
power cord adapter, insert an ASTA-approved
BS1362, 13-amp fuse into the fuse carrier.
12. f an extension cord is needed, use only a 3-
conductor, 14-gauge (1 mm2) cord that is no
longer than 5 ft. (1.5 m).
13. Keep the power cord away from heated
surfaces.
14. Never move the walking belt while the power
is turned off. Do not operate the treadmill if
the power cord or plug is damaged, or if the
treadmill is not working properly. (See TROU-
BLESHOOT NG on page 23 if the treadmill is
not working properly.)
15. Read, understand, and test the emergency
stop procedure before using the treadmill (see
HOW TO TURN ON THE POWER on page 15).
16. Never start the treadmill while you are stand-
ing on the walking belt. Always hold the
handrails while using the treadmill.
17. The treadmill is capable of high speeds.
Adjust the speed in small increments to avoid
sudden jumps in speed.
18. The heart rate monitor is not a medical de-
vice. Various factors, including the user's
movement, may affect the accuracy of heart
rate readings. The heart rate monitor is in-
tended only as an exercise aid in determining
heart rate trends in general.
WARN NG: To reduce the risk of serious injury, read all important precautions and in-
structions in this manual and all warnings on your treadmill before using your treadmill. CON as-
sumes no responsibility for personal injury or property damage sustained by or through the use of
this product.
MPORTANT PRECAUT ONS

4
19. Never leave the treadmill unattended while it
is running. Always remove the key, unplug
the power cord, and press the power switch
into the off position when the treadmill is not
in use. (See the drawing on page 5 for the lo-
cation of the power switch.)
20. Do not attempt to raise, lower, or move the
treadmill until it is properly assembled. (See
ASSEMBLY on page 6, and HOW TO FOLD
AND MOVE THE TREADM LL on page 22.)
You must be able to safely lift 45 lbs. (20 kg)
to raise, lower, or move the treadmill.
21. When folding or moving the treadmill, make
sure that the storage latch is holding the
frame securely in the storage position.
22. Never insert any object into any opening on
the treadmill.
23. nspect and properly tighten all parts of the
treadmill regularly.
24. DANGER: Always unplug the power
cord immediately after use, before cleaning the
treadmill, and before performing the mainte-
nance and adjustment procedures described in
this manual. Never remove the motor hood un-
less instructed to do so by an authorized ser-
vice representative. Servicing other than the
procedures in this manual should be performed
by an authorized service representative only.
25. This treadmill is intended for home use only.
Do not use this treadmill in a commercial,
rental, or institutional setting.
26. Over exercising may result in serious injury
or death. f you feel faint or if you experience
pain while exercising, stop immediately and
cool down.
SAVE THESE NSTRUCT ONS

5
Thank you for selecting the revolutionary
NORDICTRACK®T8.0 treadmill. The T8.0 treadmill of-
fers an impressive selection of features designed to
make your workouts at home more enjoyable and ef-
fective. And when youʼre not exercising, the unique
treadmill can be folded up, requiring less than half the
floor space of other treadmills.
For your benefit, read this manual carefully before
using the treadmill. If you have questions after read-
ing this manual, please see the front cover of this man-
ual. To help us assist you, please note the product
model number and serial number before contacting us.
The model number and the location of the serial num-
ber decal are shown on the front cover of this manual.
Before reading further, please review the drawing
below and familiarize yourself with the labeled parts.
BEFORE YOU BEG N
Handrail
Tray
Key/Clip
Power Switch
Walking Belt
Platform Cushion
Foot Rail
Idler Roller
Adjustment Screws
Console
Heart Rate
Monitor
Length: 6 ft. (183 cm)
Width: 2 ft. 10 in. (86 cm)
Weight: 214 lbs. (97 kg)

6
ASSEMBLY
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking
belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of
the walking belt or the shipping carton. This is normal and does not affect treadmill performance. If there is lubri-
cant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
Assembly requires the included hex key and your own Phillips screwdriver , adjustable
wrench , scissors , and needlenose pliers .
Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is
the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses
is the quantity needed for assembly. Note: Some small parts may have been preassembled. To avoid dam-
aging parts, do not use power tools. Extra hardware may be included.
#8 x 1/2" Ground
Screw (1)–1
3/8" Star
Washer (5)–6
3/8" Nut (3)–4
#8 x 3/4" Screw
(6)–18
5/16" Star
Washer (8)–2
1/4" x 5/8"
Screw (9)–4
1/4" Star
Washer (11)–4
3/8" x 2" Bolt (13)–1 3/8" x 2 1/2" Bolt (2)–2
3/8" x 4" Screw (4)–6
3/8" x 1 3/4" Bolt (12)–1
1/4" x 1 3/4"
Screw (10)–4
5/16" x 3 1/4" Screw (7)–2

7
3. Identify the Left Upright (75), which is either
marked “Left” or “L.” Have a second person hold
the Left Upright near the Base (80).
See the inset drawing. Tie the wire tie in the
Left Upright (75) securely around the end of the
Upright Wire (70). Then, pull the other end of the
wire tie until the Upright Wire is routed through
the Left Upright.
3
1.Make sure that the power cord is unplugged.
Attach a Wheel (81) to the Base (80) with a 3/8"
x 2 1/2" Bolt (2) and a 3/8" Nut (3). Do not over-
tighten the Nut; the Wheel must turn freely.
Attach the other Wheel (not shown) to the
other side of the Base (80) in the same way.
1
81
80
2
3
70
75
75
Wire
Tie
70
Wire Tie
2. Remove the ties securing the Upright Wire (70)
to the Base (80). Pull the Upright Wire and the
Base Ground Wire (92) through the indicated
hole in the Base.
Attach the Base Ground Wire (92) to the Base
(80) with a #8 x 1/2" Ground Screw (1).
Press a Base Cap (77) into each side of the
Base (80). Press the Grommet (67) into the
square hole in the Base.
70
2
Hole
1
92
77
80
67
80

8
5. Set the Console Base (83) face down on a soft
surface to avoid scratching the Console Base.
Remove the two Screws (A) from the Console
Frame (87). Remove the Console Frame.
Discard the Screws.
83
87
5
4. Hold the Left Upright (75) against the Base
(80). Be careful not to pinch the wires. Insert
a 3/8" x 4" Screw (4) with a 3/8" Star Washer
(5) into the top hole in the Left Upright.
Insert the 3/8" x 4" Screw (4) partially through
the Left Upright (75). Next, slide a Screw
Spacer (93) onto the end of the Screw. Then,
tighten the Screw partially into the Base (80).
Partially tighten two more 3/8" x 4" Screws (4)
with two 3/8" Star Washers (5) into the Left
Upright (75); do not fully tighten the Screws
yet.
Attach the Right Upright (not shown) in the
same way. Note: There are no wires on the
right side.
75
93
4
5
5
4
80
Wires
A
A

9
7. Insert the upper end of the Left Handrail (71)
into the tube on the Console Frame (87). Hold
the lower end against the Left Upright (75).
Attach the Left Handrail (71) with two 1/4" x
1 3/4" Screws (10), two 1/4" Star Washers (11),
and two 1/4" x 5/8" Screws (9) as shown; do
not tighten the Screws yet.
Attach the Right Handrail (not shown) as de-
scribed above. 9
11
7
75
10
71
6. Attach the Console Frame (87) to the Left and
Right Uprights (75, 76) with two 5/16" x 3 1/4"
Screws (7) and two 5/16" Star Washers (8); do
not fully tighten the Screws yet.
87
76
75
87
8
7
6
87

10
9. Insert the ground wires into the console assem-
bly as you set the console assembly on the Left
Upright (75) and the Right Upright (not shown).
Make sure that no wires are pinched.
Attach the console assembly with eight #8 x 3/4"
Screws (6) (four are shown); start all eight
Screws, and then tighten them. Do not over-
tighten the Screws.
Insert the wires into the Left Upright (75).
Fully tighten the ten Screws (7, 9, and 10) (only
one side is shown).
See step 4. Fully tighten the six 3/8" x 4"
Screws (4).
6
9
Console
Assembly
97
6
10
75
Wires
Console
Assembly
Wire
Tie
70
8
70
75
Console
Wire
8. Locate the tie in the console assembly. Use the
tie to pull the ground wires out of the hole in the
console assembly.
With the help of a second person, hold the con-
sole assembly near the Left Upright (75).
Connect the Upright Wire (70) to the console
wire. See the inset drawing. The connectors
should slide together easily and snap into
place. If they do not, turn one connector and try
again. F YOU DO NOT CONNECT THE CON-
NECTORS PROPERLY, THE CONSOLE MAY
BECOME DAMAGED WHEN YOU TURN ON
THE POWER.
Remove the wire tie from the Upright Wire (70).
Connect the ground wires and remove the tie.
Console
Wire
Ground
Wires
Tie
Ground
Wires