Accessing your mailbox
CallPilot Quick Reference Card
Norstar Voice Mail interface -
Remote Users
New
Messages Record
Messages
Saved
Messages
Mailbox
Commands
Copyright © 2005–2006
Nortel Networks, All
rights reserved
NN40090-105 01.01
Back Oper Skip
From your telephone:
1. Enter the CallPilot system number and then enter the CallPilot extension.
2. Enter your mailbox number and password and press £.
3. Follow the voice prompts and press the dialpad keys for the features you want to use.
Listen to New
Messages
¤
Record
Message
‹
Listen to Saved
Messages
°
Company
Directory
⁄
Greetings and
Call Forward
Options
¤
Change
Password
›
Target
Attendant
fi
Off-Premise
Message
Notification
fl
Outbound
Transfer
Options
°
Return to
Main
Menu
•
⁄
Record Greetings
⁄
Primary
¤
Alternate
‹
Personalized
¤
Choose Greeting
⁄¤
Alternate
Primary
‹
Call Forward
You must initialize your mailbox to receive and store messages.
1. Dial the CallPilot system telephone number.
The CallPilot system number is:______________________.
2. Dial the CallPilot extension, then enter your mailbox number.
3. Enter ‚‚‚‚ (the temporary password) and press £.
4. Enter a new password from four to eight digits long that does
not start with zero, and press £.
5. Reenter your new password and press £.
6. At the tone, record your name in the company directory.
7. Press £to end the recording.
8. Press £to accept the recording.
9. Replace the handset to end the session.
Now you are ready to record your personal mailbox greetings and
use the CallPilot features described in this card.
Note: If you do not record a personal greeting, your
Company Directory name plays to callers.
For detailed information about using the Norstar Voice Mail,
interface, refer to the CallPilot Reference Guide.
Initializing your mailbox
fl
Mailbox
Administration
