Northern 52972 User manual

SAVE THESE INSTRUCTIONS
2 in 1 Folding 36In. Creeper
Owner’s Manual
WARNING: Read carefully and understand all ASSEMBLY AND OPERATION
INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety
precautions may result in serious personal injury.
Item #52972

Page 2 of 9
Thank you very much for choosing a Northern Tool & Equipment™
product!
For future reference, please complete the owner’s record below:
Serial Number/Lot Date Code: ________________________________
Purchase Date: ____________________________________________
Save the receipt, warranty, and this manual. It is important that you read
the entire manual to become familiar with this product before you begin
using it.
This creeper is designed for certain applications only. Northern Tool &
Equipment is not responsible for issues arising from modification or
improper use of this product such as an application for which it was not
designed. We strongly recommend that this product not be modified
and/or used for any application other than that for which it was designed.
For technical questions, please call 1-800-222-5381.

Page 3 of 9
Table of Contents
Intended Use..........................................................................................................................................4
Technical Specifications......................................................................................................................4
Important Safety Information...............................................................................................................4
Specific Operation Warnings...............................................................................................................5
Main Parts of Product...........................................................................................................................5
Parts Diagram........................................................................................................................................6
Parts List................................................................................................................................................6
Assembly Instructions..........................................................................................................................6
Replacement Parts................................................................................................................................7
Limited Warranty...................................................................................................................................8

Page 4 of 9
Intended Use
Northern Tool & Equipment’s 2 in 1 Folding 36 inch lay down Creeper & Z-frame roller seat is spring-
loaded with a stop pin to convert in a snap. The creeper is vinyl covered with high density foam
padding for comfort and a heavy duty steel frame.
Technical Specifications
Property
Specification
Dimensions L x W x H (in.)
36 x 16.3 x 5.3
Net Weight (lbs.)
13.4
Material
Steel
Rated Load Capacity (lbs.)
300
Important Safety Information
⚠WARNING
Read and understand all instructions. Failure to follow all instructions may result in serious injury
or property damage.
The warnings, cautions, and instructions in this manual cannot cover all possible conditions or
situations that could occur. Exercise common sense and caution when using this creeper. Always
be aware of the environment and ensure that the creeper is used in a safe and responsible
manner.
Do not allow persons to operate or assemble the creeper until they have read this manual and
have developed a thorough understanding of how it works.
Do not modify this creeper in any way. Unauthorized modification may impair the function and/or
safety and could affect the life of the product. There are specific applications for which the creeper
was designed.
Use the right tool for the job. DO NOT attempt to force small equipment to do the work of larger
industrial equipment. There are certain applications for which this equipment was designed. It will
do the job better and more safely at the capacity for which it was intended. DO NOT use this
equipment for a purpose for which it was not intended.
Industrial or commercial applications must follow OSHA requirements.
⚠WARNING
PERSONAL SAFETY
Wear the proper personal protective equipment when necessary. Use ANSIZ87.1 compliant
safety goggles (not safety glasses) with side shields, or when needed, a face shield. Use a dust
mask in dusty work conditions. Also use non-skid safety shoes, hardhat, gloves, dust collection
systems, and hearing protection when appropriate. This applies to all persons in the work area.
Do not overreach. Keep proper footing and balance at all times.

Page 5 of 9
⚠CAUTION
CREEPER USE AND CARE
Do not force the creeper. Products are safer and do a better job when used in the manner for
which they are designed. Plan your work, and use the correct product for the job.
Check for damaged parts before each use. Carefully check that the creeper will operate properly
and perform its intended function. Replace damaged or worn parts immediately. Never operate the
creeper with a damaged part.
Store the creeper when it is not in use. Store it in a dry, secure place out of the reach of children.
Inspect the tool for good working condition prior to storage and before re-use.
Use only accessories that are recommended by the manufacturer for use with your creeper.
Accessories that may be suitable for one product may create a risk of injury when used with
another tool. Never use an accessory that has a lower operating speed or operating pressure than
the tool itself.
Specific Operation Warnings
⚠WARNING
Do not place under automobile tires to move or reposition a vehicle.
Do not exceed the rated load capacity.
Do not use as a toy or skateboard.
Do not stand on or use as a stepping device.
Inspect for damages or defects before using.
Do not use if any part of the support structure is damaged, split or cracked.
When not in use, store in a secure place.
Always store in an upright position.
Keep out of reach of children.
Main Parts of Product
Reference
Subassembly
1
Frame with pad
2
Caster

Page 6 of 9
Parts Diagram
Parts List
Part Number
Item Description
Qty.
Remark
1
Head rest
1
2
Bolt M6
2
3
Bolt M6 longer
1
4
Hex nut
6
5
Caster
6
6
Head rest
1
Assembly Instructions
Assembly Steps
1. Remove the headrest.

Page 7 of 9
2. Insert the 6 casters into each of the holes on the frame from below and then secure the caster
nuts from the top with the hex key.
3. Assemble the headrest.
Replacement Parts
For replacement parts and technical questions, please call Customer Service at 1-800-222-5381.
Not all product components are available for replacement. The illustrations provided are a
convenient reference to the location and position of parts in the assembly sequence.
When ordering parts, the following will be required: item model number, Item Serial Number/Item
Lot Date Code, Item Description, and the Replacement Part Reference Number.
The distributor reserves the rights to make design changes and or improvements to product lines
and manuals without notice.

Page 8 of 9
Limited Warranty
Northern Tool and Equipment Company, Inc. ("We'' or '"Us'') warrants to the original purchaser only
("You'' or “Your”) that the NTE product purchased will be free from material defects in both materials
and workmanship, normal wear and tear excepted, for a period of one year from date of purchase.
The foregoing warranty is valid only if the installation and use of the product is strictly in accordance
with product instructions. There are no other warranties, express or implied, including the warranty of
merchantability or fitness for a particular purpose. If the product does not comply with this limited
warranty, Your sole and exclusive remedy is that We will, at our sole option and within a commercially
reasonable time, either replace the product or product component without charge to You or refund the
purchase price (less shipping). This limited warranty is not transferable.
Limitations on the Warranty
This limited warranty does not cover: (a) normal wear and tear; (b) damage through abuse, neglect,
misuse, or as a result of any accident or in any other manner; (c) damage from misapplication,
overloading, or improper installation; (d) improper maintenance and repair; and (e) product alteration
in any manner by anyone other than Us, with the sole exception of alterations made pursuant to
product instructions and in a workmanlike manner.
Obligations of Purchaser
You must retain Your product purchase receipt to verify date of purchase and that You are the original
purchaser. To make a warranty claim, contact Us at 1-800-222-5381, identify the product by make
and model number, and follow the claim instructions that will be provided. The product and the
purchase receipt must be provided to Us in order to process Your warranty claim. Any returned
product that is replaced or refunded by Us becomes our property. You will be responsible for return
shipping costs or costs related to Your return visit to a retail store.
Remedy Limits
Product replacement or a refund of the purchase price is Your sole remedy under this limited warranty
or any other warranty related to the product. We shall not be liable for: service or labor charges or
damage to Your property incurred in removing or replacing the product; any damages, including,
without limitation, damages to tangible personal property or personal injury, related to Your improper
use, installation, or maintenance of the product or product component; or any indirect, incidental or
consequential damages of any kind for any reason.
Assumption of Risk
You acknowledge and agree that any use of the product for any purpose other than the specified
use(s) stated in the product instructions is at Your own risk.
Governing Law
This limited warranty gives You specific legal rights, and You also may have other rights which vary
from state to state. Some states do not allow limitations or exclusions on implied warranties or
incidental or consequential damages, so the above limitations may not apply to You. This limited
warranty is governed by the laws of the State of Minnesota, without regard to rules pertaining to
conflicts of law. The state courts located in Dakota County, Minnesota shall have exclusive jurisdiction
for any disputes relating to this warranty.

Page 9 of 9
Distributed by:
Northern Tool & Equipment Company, Inc.
Burnsville, Minnesota 55306
www.northerntool.com
Made in China