Nova 9035-R User manual

9035-R
Bath Bench with Arms
User Guide
Our mission is to change the
world - every day - every way
User Guide and video available online at
www.novamedicalproducts.com
Weight Capacity: 300 lbs.
Customer Help Line: 1-800-557-6682
www.NovaMedicalProducts.com
P.O. Box 3039, Gardena, CA 90247
Warranty Information
Nova extends this warranty only to the original purchaser of this product.
Metal Frame: Limited Lifetime Warranty
Non Metal/Metal parts: 1 Year Warranty (Rubber tips, plastic or metal hardware)
For warranty service, please contact the dealer from whom you purchased your Nova.
To see full warranty details go to www.novamedicalproducts.com

Parts out of the box: (Be sure all parts are included before assembling)
(1) Seat (see image 1)
(4) Legs
(2) Arms
image 1
image 2
Step 1: Place the seat face down on a level surface. (see image 2)
Step 2: Insert the four leg tubes into the frame. Depress the brass push pin and push the tube in until the
pin fully engages in the frame hole. (see image 3)
Step 3: Place the chair upright so that it is resting on all four legs and insert the arms into the frame.
Depress both push pins in and push down until the pins fully engage in both frame holes.
(see image 4) Repeat this step for the opposite arm. (Note: Arms should bend back towards the
chair and not away from the chair.)
Step 4: Use the push buttons to adjust the stool to the desired seat height. Be sure the bench is level and
stable before using and that all push buttons are fully engaged.
image 3 image 4