Novogratz 1323015COM User manual

1323015COM
Turntable Stand
- Unit can tip over causing severe injury or death.
- Anchor unit to stud in wall (if instructed to).
- Do Not allow children to climb on unit.
- Put heavy items on lower shelves or drawers.
B341323015COM0
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
WARNING
Follow Ameriwood Home
Tube
You
Date of Purchase ___ / ___ / ___
Lot Number:
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-800-489-3351 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.ameriwoodhome.com
Assembly Difficulty Meter
Easy Tough

Contact Us!
Helpful Hints
2
ameriwoodhome.com
Do NOT return this product!
Contact our friendly customer service team first for help.
Call us!
1-800-489-3351
Monday-Friday
9am - 5pm CST
Visit ameriwoodhome.com to view the
limited warranty valid in the U.S. and Canada.
Assembly Tips
- Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Identify, sort and count the parts before attempting assembly.
- Compression dowels are lightly tapped in with a hammer.
- Slides are labeled with a R (right) and L (left) for proper placement.
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge.
- Use all the nails provided for the back panel and spread them out equally.
- Back panel must be used to make sure your unit is sturdy.
- Do NOT use harsh chemicals or abrasive cleaners on this item.
- Never push, pull, or drag your furniture.
Tube
You
PEOPLE NEEDED FOR ASSEMBLY: 1-2
ESTIMATED ASSEMBLY TIME: 1 HOUR

3
ameriwoodhome.com
Before You Start
P
Quick
Tip
Assembly
P
P
P
Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the assembly process.
1
3
2
4
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Caution: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is tight.
Failure to do so may result in stripping the screw.
P

4
ameriwoodhome.com
Board Identification
Not actual size
Ths part is paperboard
construction. It is not
made from wood, but is
required for the
assembly of your unit.
Left Panel
31323015010
Right Panel
31323015020
Partition
31323015030
Top
31323015040
Bottom
31323015050
x2
Shelf
31323015060
x2
Drawer Front
31323222070
x2
Drawer Bottom
39991341043710D
x4
Drawer Side
39991120346200C
x2
Drawer Back
39991120042640B
Back Panel
K132301500
ABCD
EFG
H
DWR
SIDE DWR
BACK
I

5
ameriwoodhome.com
Board Identification
Not actual size
Ths part is paperboard
construction. It is not
made from wood, but is
required for the
assembly of your unit.
I
DWR
BACK
DWR
SIDE
H
E
F
G
D
C
B
A
F
DWR
SIDE
x2

6
ameriwoodhome.com
Part List
Actual Size
Not Actual Size
4
3
2
1
5
67
(x14)
#A22610
cam bolt
(x14)
#A22620
cam lock
(x14)
#A21660
wood dowel
(x6)
#A23030
confirmat screw
(x16)
#A12120
7/16" screw
(x28)
#A21110
nail
(x20)
#A11080
7/16" screw
(x8)
#A21970
drive fastener
8
(x2)
#A56770
drawer slide kit
left cabinet member
right cabinet member
left drawer member
right drawer member
9a
9b
9c
9d
(x5)
#A44620
leg
(x4)
#A54510
drawer bracket
(x6)
#A90600
record rack
10 11
12
13
(x20)
#A14220
1/2" screw

7
ameriwoodhome.com
STEP1
Proper orientation of CAM LOCK
Tip
Assembly
Quick
123
3
1
9a
(x2)
#A22610
(x2)
#A22620
(x2)
#A21660
(x3)
#A11080
(x1)
#A56770
left cabinet member
marked with "L"
4
2
4
9a
2
3
A
finished edge

8
ameriwoodhome.com
STEP2
Proper orientation of CAM LOCK
Tip
Assembly
Quick
4
3
2
1
1
(x2)
#A22610
(x2)
#A22620
(x2)
#A21660
(x3)
#A11080
(x1)
#A56770
right cabinet member
marked with "R"
finished edge
9b
2
3
23
9b
4
B

9
ameriwoodhome.com
STEP3
Proper orientation of CAM LOCK
Tip
Assembly
Quick
1234
9a
(x4)
#A22610
(x2)
#A22620
(x2)
#A21660
(x6)
#A11080
(x1)
#A56770
left cabinet member
marked with "L"
9b
right cabinet member
marked with "R"
1
1
2
3
finished edge
11
2
3
3
3
9a
9b
44
CC
Note: 1 part, opposite surfaces.

10
ameriwoodhome.com
STEP4
1
(x6)
#A22610
1
1
1
1
1
1
D

11
ameriwoodhome.com
STEP5
Proper orientation of CAM LOCK
Tip
Assembly
Quick
23
(x8)
#A22620
(x8)
#A21660
2
2
3
3
3
3
2
2
x2
F

12
ameriwoodhome.com
STEP6
UNLOCKLOCK
C
F
F
All finished edges will face up.

13
ameriwoodhome.com
STEP7
All finished edges will face up.
UNLOCKLOCK
F
C
F
A
B

14
ameriwoodhome.com
STEP8
5
5
5
5
5
5
5
A
F
C
F
B
(x6)
#A23030
All finished edges will face up.
E

15
ameriwoodhome.com
STEP9
UNLOCKLOCK
A
C
B
D
All finished edges will face up.

16
ameriwoodhome.com
STEP10
Assure that the unit is square.
Distance from corner to corner
must be equal as shown.
Carefully turn your unit over on its front side as shown.
Assure that the unit is square.
Distance from corner to corner must be equal as shown.
Flush bottom edge of back panel (I) with bottom edge of
bottom (E). Align squarely. Attached the back panel as
shown nailing straight into the raw edges.
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT
AND MUST BE INSTALLED PROPERLY.
(x28)
#A21110
7
7
E
A
I
Raw Surface Shown

17
ameriwoodhome.com
STEP11
(x5)
#A44620
(x20)
#A14220
When mounting legs (11), be sure
the legs angle outward.
Front View
Side View
11
Front of
Stand
11
11
11
11
11
E
13
13
Note: screw #13 is
larger than screw #6

18
ameriwoodhome.com
STEP12
6
10
(x8)
#A12120
(x4)
#A54510
6
66
6
10 10
DWR
SIDE DWR
SIDE
x2 x2

19
ameriwoodhome.com
STEP13
6
(x8)
#A12120
6
6
DWR
SIDE
DWR
SIDE
G
You will be assembling 2 complete drawers. You will
repeat the next few steps to assemble your 2 drawers
.
x2

20
ameriwoodhome.com
STEP14
DWR
SIDE
G
DWR
SIDE
x2
DWR
BACK
H
finished surface
You will need to tap the drive fasteners (8) lightly with a
hammer to secure the drawer back to the drawer sides.
8
(x8)
#A21970
8
8
8
8