Novogratz Nightstand User manual

5746015COM
Nightstand
- Unit can tip over causing severe injury or death.
- Anchor unit to stud in wall (if instructed to).
- Do Not allow children to climb on unit.
- Put heavy items on lower shelves or drawers.
B345746015COM1
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
WARNING
Follow Ameriwood Home
Tube
You
Date of Purchase ___ / ___ / ___
Lot Number:
Assembly Difficulty Meter
Easy Tough
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-800-489-3351 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.ameriwoodhome.com

Contact Us!
Helpful Hints
2
ameriwoodhome.com
Do NOT return this product!
Contact our friendly customer service team first for help.
Call us!
1-800-489-3351
Monday-Friday
9am - 5pm CST
Visit ameriwoodhome.com to view the
limited warranty valid in the U.S. and Canada.
Assembly Tips
- Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Identify, sort and count the parts before attempting assembly.
- Compression dowels are lightly tapped in with a hammer.
- Slides are labeled with a R (right) and L (left) for proper placement.
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge.
- Use all the nails provided for the back panel and spread them out equally.
- Back panel must be used to make sure your unit is sturdy.
- Do NOT use harsh chemicals or abrasive cleaners on this item.
- Never push, pull, or drag your furniture.
Tube
You
PEOPLE NEEDED FOR ASSEMBLY: 1-2
ESTIMATED ASSEMBLY TIME: 2 HOUR
S

3
ameriwoodhome.com
Before You Start
P
Quick
Tip
Assembly
P
P
P
Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the assembly process.
1
3
2
4
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Caution: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is tight.
Failure to do so may result in stripping the screw.
P

4
ameriwoodhome.com
Board Identification
Not actual size
Left Panel
35746015011
Right Panel
35746015021
Top
35746015030
Left Front Molding
35746015050
Bottom
35746015041
Back Panel
K57461500
Right Front Molding
35746015060
x2
Back Rail
35746015070
x4
Side Rail
35746015080
Support
35746015090
x2
Drawer Side
39991120346200C
Drawer Back
39991120031540B
Drawer Front
35746015102
Drawer Bottom
35746331120
DWR
SIDE
AC D
B
DWR
BACK
FG
S
EH
I
JL
This piece is paperboard
construction. It is not made from
wood, but is required for the
assembly of your unit.

5
ameriwoodhome.com
Board Identification
Not actual size
A
B
C
D
F
G
H
DWR
BACK
L
This piece is paperboard
construction. It is not made from
wood, but is required for the
assembly of your unit.
DWR
SIDE
GH
DWR
SIDE
H
H
E
I
S
J

6
ameriwoodhome.com
Part List
Actual Size
(x6)
#A22620
cam lock
(x6)
#A22610
cam bolt
(x4)
#A21660
wood dowel
(x10)
#A11080
#6 x 7/16" flat head
(x8)
#A12120
#8 x 7/16" pan head
(x2)
#A17400
8-32 x 7/8" truss
(x4)
#A21970
drive fastener
(x8)
#A23030
confirmat screw
(x20)
#A21110
nail
7
69
8
10
12
(x4)
#A22900
connector
(x4)
#A22910
connector bolt
3
45
13
(x12)
#A12920
1-1/8" pan head
(x12)
#A12420
5/8" pan head
11 12

7
ameriwoodhome.com
Part List
Not Actual Size
Left Cabinet Member
Right Cabinet Member
Left Drawer Member
Right Drawer Member
(x1)
#A56770
drawer slide pkg.
(x2)
#A54510
drawer bracket
14a
14b
14c
14d
(x1)
#A51675
handle
(x4)
#A44375
leg
15 16
17
14

8
ameriwoodhome.com
STEP1
(x1)
#A22620
5
(x2)
#A22610
(x1)
#A21660
12
2
1
5
3
(x2)
#A22900
3
A
1
Proper orientation of CAM LOCK
Tip
Assembly
Quick
3
You will need to tap the connector (3)
with a hammer to fully insert. Be sure
the connector is positioned as shown
before pushing into holes.

9
ameriwoodhome.com
STEP2
1235
(x1)
#A22620
(x2)
#A22610
(x2)
#A22900
(x1)
#A21660
3
1
5
2
1
Proper orientation of CAM LOCK
Tip
Assembly
Quick
3
You will need to tap the connector (3)
with a hammer to fully insert. Be sure
the connector is positioned as shown
before pushing into holes.
B

10
ameriwoodhome.com
STEP3
6
(x6)
#A11080
14a
14b
Left Cabinet Member
Right Cabinet Member
(x1)
#A56770
A
B
14a
14b
marked with a "L"
marked with a "R"
6
6
6
6
6
6