Novogratz 5396015COM User manual

5396015COM
6 Drawer Dresser
B345396015COM0
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Follow Ameriwood Home
Tube
You
Date of Purchase ___ / ___ / ___
Lot Number:
Do Not Return This Product!
Contact our customer service team for help first.
Call: 1-800-489-3351 (toll free)
Monday-Friday 9am - 5pm CST
Visit: www.ameriwoodhome.com
Assembly Difficulty Meter
Easy Tough
Keep your home and family safe
with the wall anchor kit that is
included with the product.
Serious or fatal crushing injuries can
occur from tipping furniture.
Secure Your Furniture
WARNING: Manufacturer assumes no liability
for improper installation or excessive loads
placed on screws or bracket. This wall anchor
is not a substitute for proper adult supervision.

Contact Us!
Helpful Hints
2
ameriwoodhome.com
Do NOT return this product!
Contact our friendly customer service team first for help.
Call us!
1-800-489-3351
Monday-Friday
9am - 5pm CST
Visit ameriwoodhome.com to view the
limited warranty valid in the U.S. and Canada.
Assembly Tips
- Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Identify, sort and count the parts before attempting assembly.
- Compression dowels are lightly tapped in with a hammer.
- Slides are labeled with a R (right) and L (left) for proper placement.
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge.
- Use all the nails provided for the back panel and spread them out equally.
- Back panel must be used to make sure your unit is sturdy.
- Do NOT use harsh chemicals or abrasive cleaners on this item.
- Never push, pull, or drag your furniture.
Tube
You
PEOPLE NEEDED FOR ASSEMBLY: 1-2
ESTIMATED ASSEMBLY TIME: 2 HOUR
S

3
ameriwoodhome.com
Before You Start
P
Quick
Tip
Assembly
P
P
P
Cam Lock Fastening System
This Cam Lock Fastening System will be used throughout the assembly process.
1
3
2
4
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Caution: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is tight.
Failure to do so may result in stripping the screw.
P

4
ameriwoodhome.com
Board Identification
Not actual size
This piece is paperboard
construction. It is not made from
wood, but is required for the
assembly of your unit.
Left Panel
30501000101500 Right Panel
30501000201500
Partition
30501000301500 Top
30501000401500
x4
Brace
30501000501500
x6
drawer front
30501000601500
x6
Drawer Bottom
39991340071310D
Bottom
30501000701500
x6
Drawer Brace
35538000121
x12
Drawer Side
39991167346200C
x6
Drawer Back
39991167070350B
Back Panel
K539600000
AB
C
D
EFGH
L
DWR
SIDE
DWR
BACK
M

5
ameriwoodhome.com
Board Identification
Not actual size
A
B
C
D
F
G
H
M
DWR
BACK
L
E
E
E
E
DWR
SIDE
DWR
SIDE
This piece is paperboard
construction. It is not made from
wood, but is required for the
assembly of your unit.

6
ameriwoodhome.com
Part List
Actual Size
(x20)
#A22620
cam lock
(x20)
#A22610
cam bolt
(x14)
#A21660
wood dowel
(x60)
#A11080
#6 x 7/16" flat head
(x48)
#A12120
#8 x 7/16" pan head
(x12)
#A17400
8-32 x 7/8" truss
(x36)
#A21970
drive fastener
(x6)
#A23030
confirmat screw
(x6)
#A21520
compression dowel
(x51)
#A21110
nail
10 11
3
2
4
15
(x15)
#A15600
euro screw
6
7
8
9

7
ameriwoodhome.com
Part List
Not Actual Size
Left Cabinet Member
Right Cabinet Member
Left Drawer Member
Right Drawer Member
(x6)
#A56770
drawer slide pkg.
(x1)
#A84050
safety bracket kit
(x12)
#A54520
drawer bracket
12a
12b
12c
12d
13a
13b
13c
13d
14
(x12)
#A51975
knob
(x5)
#A44610
leg
15
16

8
ameriwoodhome.com
STEP1
Proper orientation of CAM LOCK
Tip
Assembly
Quick
(x2)
#A22620
3
(x2)
#A22610 (x2) #A21660
12
2
1
3
A
1
3
2
finished edge

9
ameriwoodhome.com
STEP2
4
12a
(x9)
#A11080
Left Cabinet Member
(x3)
#A56770
marked with a "L"
finished edge
4
12a
marked with a "L"
A
12a
12a
12a

10
ameriwoodhome.com
STEP3
Proper orientation of CAM LOCK
Tip
Assembly
Quick
12
3
1
3
2
(x2)
#A22620 (x2)
#A22610 (x2) #A21660
finished edge
B
2
3
1

11
ameriwoodhome.com
STEP4
4
12b
(x3)
#A56770
Right Cabinet Member
marked with a "R"
(x9)
#A11080
finished edge
marked with a "R"
4
12b
B
12b
12b
12b

12
ameriwoodhome.com
STEP5
Proper orientation of CAM LOCK
Tip
Assembly
Quick
12
3
1
3
2
4
12a
12b
(x2)
#A22620 (x4)
#A22610 (x2) #A21660 (x18)
#A11080
(x3)
#A56770
Left Cabinet Member
Right Cabinet Member
marked with a "L"
marked with a "R"
1
3
2
marked with a "L"
marked with a "R"
12a
12a
12a
12b
12b
12b
finished edge
CC
44
22

13
ameriwoodhome.com
STEP6
2
13b
13a
(x6)
#A22610 (x1)
#A84050
2
13a
13b
2
2
2
2
2
finished edge
D
Do not fully tighten screw.

14
ameriwoodhome.com
STEP7
13
(x8)
#A22620 (x8)
#A21660
1
1
3
3
E
x4
Proper orientation of CAM LOCK
Tip
Assembly
Quick

15
ameriwoodhome.com
STEP8
6
(x2)
#A23030
* raw edges are shaded
6
C
H
When the two parts are screwed together, the
raw back edges will be flush with each other.

16
ameriwoodhome.com
STEP9
UNLOCKLOCK
H
C
E
E
E
E
* raw edges are shaded
finished edge
finished edge

17
ameriwoodhome.com
STEP10
UNLOCKLOCK
6
(x4)
#A23030
6
C
H
E
E
E
A
B
6
6
6
Press the left panel (A) and right panel (B) against the braces (E)
as shown so the cam bolts (2) and wood dowels (3) insert into
the holes. Turn cam locks (1) clockwise to lock in place.
Fasten the bottom (H) to the left and right panels (A&B) with
four screws (6) as shown.
* raw edges are shaded

18
ameriwoodhome.com
STEP11
* raw edges are shaded
UNLOCKLOCK
B
C
A
D

19
ameriwoodhome.com
STEP12
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART OF THIS UNIT
AND MUST BE INSTALLED PROPERLY.
(x51)
#A21110
Attached the back panel as shown nailing straight into the raw edges.
Assure that the unit is square.
Distance from corner to corner must be equal as shown.
Assure that the unit is square.
Distance from corner to corner
must be equal as shown.
8
Flush the bottom edge of the back panel
with the bottom edge of the bottom (H).
Be sure the notch in the back
panel is positioned for access to
safety bracket (13a).
8
H
B
M

20
ameriwoodhome.com
STEP13
716
(x15)
#A15600
(x5)
#A44610
7
16
H