Nowley 21-2022 User manual

SMARTWATCH NOWLEY
21-2022
TIME FOR CHANGE

Compatible system and requirement
Android 4.4 or above IOS above 8.5 iphone5s Bluetooth 4.0
Preparation
Please ensure that the battery is fully charged for the first time. If the battery is too
low, please charge it for 2-2.5 hours. (Be sure to charge the battery for the first
time.
Under the shutdown state, the bracelet will display the charging icon. Under the
boot condition, the batterybar on the main interface of the wristband will be in a
flowing state.
Connection Instruction---- Mobile APP download Method
1: Scan the right QR code to download
2: Please download the ”WearFit” in the Play store (Android), or on
the Apple Store (IOS).
The bracelet function specification
Time mode: Battery indicator, Date, Sleep time, Step count.(The time of the
bracelet after connected the app will automatically synchronize with the time of
the phone, and the time cannot be set on the wristband) Long press the double
dial to switch.
Sports information: Automatically record daily steps, calories, kilometers.
Heart rate measurement: The whole point automatically measures the current

heart rate, and can also be manually measured by the APP. The wristband
switches to the heart rate measurement Interface and presses long to enter the
measurement. The measurement is automatically returned to the corresponding
interface.
Blood pressure measurement: The current point automatically measures the
current blood pressure, and can also be manually measured by the APP. The
wristband switches to the blood pressure measurement Interface and presses
long to enter the measurement. The measurement is automatically returned to
the corresponding interface.
Blood oxygen measurement: The whole point automatically measures the
current blood oxygen measurement condition, and can also be manually
measured by the APP. The wristband switches to the blood oxygen
measurement Interface and presses long to enter the measurement. The
measurement is automatically returned to the corresponding interface.
Sleep monitoring: Automatically monitoring daily sleep quality
Exercise mode: Long press in the exercise mode interface, there are three
modes of running climbing, riding, long press on each mode interface to start
recording the movement time and calories generated, touch pause, long press to
exit.
Smart reminder: Open the reminder on the App.When there are App, call, SMS,
and other information on the phone, there is the corresponding reminder on the
bracelet.
More: Stopwatch (long press to enter, exit , tap start , pause), find the phone
(long press search, tap pause) , shut down (long pause), Stopwatch (long press
to enter, exit, tap, start, pause), find the phone (long press search, tap pause).
Power off (long press to turn off), reset function (long press to return to time
interface), QR code (scan QR code into the app download address) .

Other functions: raise your hand to brighten, sedentary reminder , do not disturb
mode, shake a photo, point measurement, Wechat sports, apple health,
automatic language matching.
Q&A
Can’t search for a bracelet or connect when binding?
Android system:
1 .Please confirm that the mobile phone Bluetooth is turned on, and the Bluetooth
logo is not displayed on the wristband (if the Bluetooth ring is displayed on the
wristband, It Indicates that It has been connected). Close to the bracelet, try
searching and connecting again, and make sure the phone system is Android4.4
or higher.
2. If you still can't connect, go to Phone Settings→ Application Managements
Authorization Management→App Rights Management, find the application
[WearFit], and mark all the permission as "Allow" then enter the phone
settings→GPS positioning to open the GPS location function of the phone, restart
your phone and try to connect.
IOS system:
1. Please confirm that the mobile phone Bluetooth is turn on, and the Bluetooth
logo is not display on the wristband(if the Bluetooth logo is display on the
wristband , it indicated that it has been connected by other devices, please
release the Bluetooth beforehand ). After the Apple mobile phone is connected
once, if you turn on the mobile phone Bluetooth again, the Bluetooth device will
be connected by default, so you can go to the phone setting →Bluetooth →ignore
this device , the APP can detect the bracelet.
2. After the bracelet is bound, the display is not connected, or the connection is
display but the power is 0%/? At this point, the phone is not successfully bound to
the bracelet. Please re-bind.
3. App no data display? In the main interface, pull down and refresh the data

manually to display the data in the APP. Automatically synchronization of data for
each hour. In addition, the whole point measurement should be turned on. Our
column diagram of step counting, heart rate and fatigue all read the whole point
data. If it is not open, the histogram has no data. After the App pull down is
refreshed , the data does not load?
4. App setting → Restore Bracelet Factory Setting → Click to restore factory
settings→Button Shutdown →Reboot the Bracelet to connect to the App.
Normally use the bracelet and the data can be loaded.
Basic parameters
Semen size
1,3 Inche
Bluetooth
Bluetooth 4.0
Waterproof rating
IP67 waterproof rating
Battery Type
Polymer Battery
Battery capacity
180mAh -
Charging time
2-3 Hours
Wrist strap size
249 mm x 22 mm x 2.9 mm
Loading method
Contact charging
Packing
Smart Bracelet + Charging Clip + Manual
Remark
If there is any problem with the quality of the product or the use of the product
please, contacts the store directly, we will deal with It quickly.
The measurement results of this product are for reference only and are not int-
ended for any medical use or basis. Please follow the doctors instructions and
must not self -diagnose and treat according to the measurement results.
3. The product waterproof rating is IP67, canbe used for waterproofing, not for di-
ving and for
A long time in the water. In addition, this product does not prevent hot water,
because water vapor will affect the ring.
The company reserves the right to modify the contents of this manual without
prior notice. Some functions are different in the corresponding software
version, which is normal.

This product contains a polymer battery. Do not leave this product In a high
temperature environment for a long time. Do not place this product in an open
flame.