NRI Currenza C2 Guide

Crane Payment Innovations GmbH • Zum Fruchthof 6 • D-21614 Buxtehude
Phone: [phone] • Fax: [phone] • E-mail: [email protected] • www.cranepi.com
Technical Documentation
Coin changer
Manual
for configuration
03.15 Schn/JMo/Roe
Version 1.2
HB.C2K-EN

3
TABLE OF CONTENTc2Configuration
Tabel of contents
1 About this manual 7
Text conventions 7
Additional technical documentation 8
2 General information 9
The vending machine interfaces 9
The user interfaces 9
When to use the HENRI service tool? 9
Connecting HENRI 10
3 Presettings 11
Selecting menu language 11
Setting display contrast (only c2blue) 12
Specifying display message for operating mode (only c2blue) 13
4 Settings for filling and emptying cassette 14
Which settings should be done? 14
Settings for tube refilling by coin insertion 14
Settings for direct refilling the removed cassette 14
Configuring float levels 15
Specifying float level per tube 15
Activating/deactivating float-up function 16
Setting tube counters to float levels automatically 17
Correcting tube counters according to filling level sensors 18
Resetting tube counters before fill-up 19
Redirecting cash-box coins to return area 20
Reporting inserted coins to machine (only c2MDB) 21
Disabling/enabling inventory keys / disabling/enabling inventory
keys using MDB/BDV protocol (only c2blue/green) 22

4
TABLE OF CONTENTS c2Configuration
5 Prices and vending modes
(only c2BDV/Executive) 23
Price holding in the coin changer 23
Setting prices 24
Activating coin changer price holding 25
Displaying price 26
Configuring "Committed to vend" or change return at any time 27
Configuring single or multi vend 28
Resetting or storing credit which cannot be paid out 29
6 Cash acceptance 30
Limiting acceptance of coins and banknotes
(only c2BDV/Executive) 31
Limiting acceptance of tube coins (filling level limitation) 32
Inhibiting coins 33
Inhibiting high-value coins if there is not enough change
(only c2BDV/Executive) 34
Optimising acceptance of genuine coins/rejection of fraud coins
(defining acceptance tolerances) 35
Selecting coin group A or B 36
Preventing coins from getting stuck in the tubes 38
Configuring security stock for each tube 38
Transmitting tube filling level incl. security stock to VMC
(only c2MDB) 39
Enabling VMC to payout security stock with DISPENSE
(only c2MDB) 39
7 Change payout 40
Reassigning coin cassette 40
Reporting more than 255 coins of the same payout
denomination to VMC (only c2MDB) 42
Limiting change return (only c2BDV/Executive) 43
Configuring conditions for tube empty message 44
Activating low-power single-motor payout 46

5
TABLE OF CONTENTc2Configuration
Activating change machine mode (small coins first) 47
8-way c² spider payout (only c2MDB) 48
Assigning the c² spider cash box/hopper coins (only c2MDB) 48
Inverting assignment of hopper and spider sorter chute
(only c² MDB) 49
8 Peripheral 50
Hopper settings 50
Setting hopper coins 51
Setting up communication with hopper(s) 52
Making hopper coins to be paid out first 53
Disabling/Enabling hopper empty and/or full detection 54
Recycler settings 55
Setting up communication with recycler 55
Inhibiting high-value banknotes depending on change stock
(only c2MDB) 57
Paying out all banknotes
(compensating the machine‘s security stock) (only c2MDB) 58
Bill validator settings (only c2BDV/Executive) 59
Setting up communication with MDB bill validator 59
Inhibiting/releasing banknote acceptance depending on
change stock or card payments 60
Activating/deactivating escrow function 61
Card reader settings (only c2BDV/Executive) 62
Setting up communication with MDB/BDV card reader 62
Activating second price list for card transactions 63
Limiting debit card recharging
(only for BDV/MDB card readers) 64
Setting up communication with external audit unit
(only c2BDV/Executive) 65

6
TABLE OF CONTENTS c2Configuration
9 Audit (option) 66
Setting vending machine number 66
Setting date and time 68
Specifying data to be printed 69
Setting output device 70
Selecting printing format 70
Selecting type of output device 71
Activating maximum IrDA readout speed
(only c2with IrDA interface on coin validator) 72
Activating Bluetooth audit (only c2with Bluetooth module) 73
10 Basic settings 74
Changing smallest coin value (base value) 74
Changing decimal point position (only c2MDB) 76
Configuring alternative coin value for second currency or
as token value 77
Changing currency/calling code (only c2MDB) 78
Changing MDB level (only c2MDB) 79
Selecting mains operation or battery operation (only c2MDB) 80
Configuring wake-up time (only c2MDB) 81
Providing coin changer configuration with write protection for
BDV machines (only c2BDV) 82
11 Batch configuration 83
Configuring coin changer master 83
Storing desired configuration in HENRI 84
Transferring desired configuration to coin changers 84
Adapting individual settings 85
12 Index 86

7
ABOUT THIS MANUALc2Configuration
1 About this manual
This manual describes how to set the c2concerning:
• Language and display (Presettings)
• Coin cassette filling and emptying
• Prices and vending modes
• Cash acceptance
• Change payout
• Peripherals
• Audit
This manual does not describe the whole functional range of the
coin changer currenza c2or HENRI service tool. In order to be able
to use the whole functional range of the devices safely as well as
toconfigureallpossiblefunctions,allmanualsandshortreference
guidesfortheNRIchangercurrenzac2andHENRIservicetoolmust
be read carefully (PDF download at www.cranepi.com, NRISupport).
Text conventions
Tomakeiteasierforyoutonavigatewithintheseinstructionsandtooperate
the devices, the following accentuations were made in the text:
Safety instructions, which you must observe in order to protect
operators and equipment.
Notes,whichyoumustobserveinordertoprotecttheenvironment.
Special notes, which are to facilitate the use of the devices.
At the beginning of a chapter you will find a short "guide", which
summarises the content of the chapter.
1 2 3 ... Requests to perform an action are numbered in another typeface
and, if possible, listed in a table.
DISPLAY TEXTS are set in small capitals.
BUTTONS and MENU ITEMS are shown in bold capitals.

8
ABOUT THE MANUAL c2Configuration
Additional technical documentation
Apart from the manual you already have, there is further documentation
for the currenza c2and HENRI service tool, e.g. about service work and
technical data. All product descriptions are available as PDF at www.
cranepi.com, NRI Support.

9
c2Configuration GENERAL INFORMATION
2 General information
In order to keep the manual as short as possible, this chapter provides
you with all general information, which will not be repeated in the following
chapters (e.g., connecting the HENRI service tool).
The vending machine interfaces
This manual refers to the configuration of all currenza c2models. The
models have different configuration options, e.g., due to different vending
machine interfaces.
The chapter title supplement put in brackets limits a certain function or
setting for one or several interfaces.
The user interfaces
Beyondthatthecurrenzac2modelsdifferintheiruserinterface.Thec2blue
is the only model with a user interface allowing a direct configuration at the
coinchanger.Allothermodels(green,orange,white)mustbeconnectedto
the HENRI service tool for configuration, that cannot be carried out using
the switch block on the rear of the coin validator.
When to use the HENRI service tool?
• To configure the c2green/orange/white
• To configure a second currency/special token values in the c2blue/
green/orange/white
• As data transfer unit for e.g. current configuration and firmware files,
which are supposed to be loaded into a c2blue/green/orange/white

10
c2Configuration
GENERAL INFORMATION
Connecting HENRI
In the HENRI short reference guide you learn how to connect the
HENRI service tool to the currenza c2with full details. At this point
you will only find a short description for on-site configurations.
Plug the RJ-45 connector of the HENRI connecting cable into the top right
socket of the coin changer.
HENRI is powered by the vending machine, switches over to the c² mode
automaticallyandshowsthe(vendingmachine)displayinnormaloperating
mode, e.g., the current change stock.
InthefollowingchaptersithasbeenassumedthatHENRIneedstobe
connectedtothecoinchangersc2green/orange/whiteforconfiguration
and shall not be explained again.
Fig. 1: Connecting HENRI