NRS Mowbray Lite User manual

Mowbray Lite Toilet Frame &Seat Range
Intended Purpose
The Mowbray Lite toilet frame and seat range is
designed to assist those who have difficulty in
lowering onto or rising from a standard toilet. The
plastic moulded seat offers support in a natural
position and the frame is height and width* adjustable.
(*Only available with M66613 –Mowbray Lite Flat
Pack)
Unpacking
·Remove all items from the packaging.
·Check all component parts are present (see
contents list overleaf)
·Check for any sign of damage.
·If you see any damage, or suspect a fault, do not
assemble the product; contact your supplier
immediately.
General Safety Warning
Please ensure these instructions are fully read
and understood before installation/ use. Retain
these instructions in a safe place for future
reference.
M66613 - Mowbray Lite - Width Adjustable - Flat Pack
M66625 - Mowbray Lite - Fixed Width Assembled
M92740 - Mowbray Lite 510 - Fixed Width Assembled
Fitting Instructions
1 - Mowbray Lite Flat Pack only: Assemble the
frame sides to the centre bars, slide until the
desired width is achieved, align the holes and
secure using the four E clips provided. Please
ensure the equivalent holes are used on each
side of the frame to ensure it remains square.
2 - All Models: Remove the moulded seat from its
polythene bag and snap into place on the centre
bars of the frame.
3 - Ensure the seat is firmly in place and secure at
both back and front.
4 - Adjust to the required height by removing each
‘E’clip in turn.
5 - Slide each leg up or down to the required
height. Align the holes in and replace ‘E’clip.
User Instructions
Maximum
User
Weight
Contents M66613 Flat Pack
Description Qty.
Toilet seat 1
Frame Side LH 1
Frame Side RH 1
Frame Centre bar 2
Leg assembly 4
E-clips 8
Note: M66625 & M92740 are delivered
assembled.
Safety Precautions
Please ensure the user does not exceed the
maximum user weight 190kg (30 stones).

00
IMPORTANT
For information on how to obtain the User
Instructions in other languages and formats for use
by people with visual, reading or cognitive
impairments, please contact: [e-mail]
or telephone [phone].
Additional copies of this user instruction are
available on our website:www.nrs-uk.co.uk.
NRS Healthcare
Sherwood House, Cartwright Way,
Forest Business Park, Bardon Hill,
Coalville, Leicestershire.
LE67 1UB UK
Tel. Main Office: 0330 100 00 98
Tel. Customer Services: 0845 120 4522
Email: [e-mail]
These products are from a range of over 3000
daily living aids available from NRS Healthcare.
To view the full range visit :
www.nrs-uk.co.uk or request a catalogue from
the above number.
www.nrs
-
uk.co.uk
UI/M66613/M66625/M92740/09/13/Iss3
6 - Ensure that all leg extensions are set at
the same height to prevent rocking.
7 - Place the Mowbray over the toilet with the
cutaway of the seat at the front and the
integral splash guard placed centrally over the
toilet bowl.
8 - When not in use Mowbray’s can be
stacked with the seat in situ. It is
recommended that no more than five frames
are stacked together for long term storage
Fitting Instructions Floor Fixing Kit
(If a permanent fix is required a Floor Fixing
Kit is available as an accessory –see spare &
accessories table.
1. Adjust frame to desired height.
2. A total of 12 screws must be used to fix
the frame to the floor, using fixing
methods appropriate to the floor’s
construction. - see diagram below
Please Note: Height adjustment is not
possible once the legs are secured to the floor
Care and Use
1. The seat may be removed from the frame and
autoclaved on cycles up to 70ºC.
2. The frame may be cleaned using a non-
abrasive cream cleaner or detergent solution.
3. Check the ferrules on the freestanding
versions monthly for signs of wear.
4. Check floor fixing screws weekly.
5. Check E clips every 2 months.
6. Maximum user weight is 190kg (30st).
Floor Fixing
Leg
Fixing Screws
(Not Included)
E Clip
Location Hole
•
•
•
•
Spares & Accessories
F11572 Floor Fixing Kit (Set of 4)
F17938 Ferrule
M66820 Seat