NST NSR-2000U User manual

NST
TM
User Manual For NSR-2000U Smart Card Reader
NSR-2000U 智慧卡讀卡機使用手冊
網安科技股份有限公司
Network Security Technology Co.,
台北縣新店市 231 中正路 190 號11F
11F., No 190, Jung-jeng Rd., Shindian City, 231, Taipei, Taiwan, R.O.C.
Tel：[phone] Fax：[phone] 網址：http://www.nst.com.tw
技術支援：ext 203~205 Technical Support：ext 203~205

1
User Manual For NSR-2000U Smart Card Reader
Introduction:
The NSR-2000U smart cardreader is a reliable and cost-effective, which is designed
for variety of smart cardapplicationson PC or Notebook. It is compliant with ISO
7816, PC/SC, and Microsoft Plug and Play specifications. This small and portable
smart card reader allowsyou to carry iteverywhere and makesconnections simple
and easy.
Specification:
lCompliant with ISO7816 –1/2/3/4
lCompliant with PC/SC Specification 1.0
lCompliant with USB Specification1.0
lPass FCC/CE EMC standard
lRead /Write ISO 7816 asynchronous smart card T=0 and T=1 protocols
lCard insertion and removal detection
lShort-circuit protection, protects smart card and reader
lDust resister, keep good contact with smart card
lPower consumption: +5V 20mA(max), compliant with ISO7816 & EMV
lDimensions: 80 mm X 86 mm X 30 mm
lConnections: USB 4 pin A type
lSupport device driverfor Windows 98/ME/2000 /XP
lSmart card connector: Friction contact
System Requirements:
lOperation System: Windows 98/ME/2000/XP
l1 USB port
lMinimum required: Pentium Class with 16 MB RAM
Application:
lSecurity & Identification
lBanking & Payment system
lAccess control
lE-Commerce
lTelecommunication & Transport
lGaming & Education

2
Installation of NSR-2000U Reader
Fig.1 Fig.2
To connect NSR-2000U to your PC:
1. Turn on your PC.
2. Plug the USB cable into PC’s USB port.(See Fig.1)
3. To avoid wrong insertion, please note that the chip side of the smart card needs
to face the marking of the NSR2000U when you insert smart card. (See Fig.2)
Driver Installation:
1. Driver installation consists of two types of processes, including automatic or
manual.
2. For automatic driver installation, please go to http://www.nst.com.tw. Press
“English”button. Select“service”. Choose “SmartCard Reader Driver—wins 2000,
XP”or “SmartCard Reader Driver—wins 98, ME”. Start downloading driver
software. Then, double click the executable file of the driver. Your computer will
pop-up a window. Follow the guidance to complete the installation process.
3. For manual driver installation, please find the enclosed floppy disk and insert it
into floppy drive. Then, follow the system instructions to finish the installation
process.
Windows 98 (ME)
The orders of installation process:
1.Install Microsoft smart card base component (scbase.exe).
2.Install Microsoft smart card library (smclib.exe).

3
(Windows 2000 (XP) . Don’t install (scbase.exe and smclib.exe)
3.Install NST smartcard reader driver.
Please follow the installation process as follows:
1. Power on your computer. If the computer has detected NST reader devices, please
press “Cancel”button first.
2. Install (scbase.exe & smclib.exe)，then reboot.
3. After computer detects NST reader devices, please select a proper driver file in the
floppy disk.
Relative file location
USB interface A:\NSR2000U\NSR2KUSB.INF (NSR2KUSB.sys)
4. Installation process finish. Restart your computer.
Windows 2000 (XP)
The orders of installation process:
1.Please directly install NST reader driver file.
(Don’t install scbase.exe & smclib.exe)
Please follow the installation process as follows:
1. After computer detects NST reader devices, please select a proper driver file in the
floppy disk.
Relative file location
USB interface A:\NSR2000U\NSR2KUSB.INF (NSR2KUSB.sys)
2. After Windows XP reader driver installation complete, please execute
A:\reader.reg
Note：
If NST smartcard reader functions improperly after Windows 2000 reader driver
installation complete, please execute A：\reader.reg, and reboot your computer.

4
NSR-2000U智慧卡讀卡機使用手冊
簡介
NSR-2000U系列讀卡機是專為許多在 PC 使用智慧卡功能的應用程式所設計的，
NSR-2000U為符合 ISO 7816,PC/SC,Plug & Play等規格，輕薄的卡機讓使用者便於攜
帶並容易操作使用。
規格:
l符合 ISO 7816-1,2,3,4
l符合 PC/SC 規格 1.0
l符合 USB 規格 1.0
l讀寫符合 ISO7816-3, T=0 或T=1 之智慧卡
l卡片插入,抽出偵測功能
l短路保護電路可保護讀卡機與智慧卡
l防塵裝置,維持與智慧卡接良好的接觸
l電氣特性：5V 20mA,符合 ISO 7816 與EMV
l外觀尺寸：80mm x 86mm x 30mm
l連接頭：USB 4 pin A Type
l支援驅動程式：Windows 98/ME/2000/XP
系統需求:
l作業系統：Windows 98/ME/2000/XP
l1個有效的 USB 埠
l最小需求：Pentium 等級 PC 及16 MB 記憶體
應用範圍:
l保密辨識系統
l銀行或付費機制
l存取控管
l電子商務
l通訊與交通
l遊戲與教育

5
NSR-2000U讀卡機安裝方式
硬體安裝：
Fig.1 Fig.2
請按下列步驟安裝至 PC:
1.開啟 PC 電源
2.將NSR-2000U插入 PC的USB 埠.(見Fig.1)
3.為避免錯誤方向的插入，插卡時必須將智慧卡晶片面與 NSR-2000U表面晶片記號同
方向.(見Fig.2)
驅動程式安裝：
驅動程式安裝分為自動安裝及手動安裝兩種。
§自動安裝方式：安裝驅動程式時系統將會出現安裝驅動程式的視窗，請依指示，按
步驟執行即可完成安裝。(安裝程式可到網安公司網站下載安裝，網址
http://www.nst.com.tw 點選 Chinese(或English)，進入 ” 技術服務 ”(或
Service) 選擇 ”驅動程式下載區 ”下載讀卡機 Windows各作業平台驅動程式。)
§手動安裝方式：則請準備好驅動程式(包裝盒內所附的安裝磁片)，依不同作業系統
(Windows 2000/XP/98/ME)，按下列的步驟安裝即可完成。

6
Windows 98 (ME)
安裝元件順序:
1.安裝 Microsoft smart card base component (scbase.exe).
2.安裝 Microsoft smart card library (smclib.exe).
(Windows 2000 (XP) 請勿安裝scbase.exe和smclib.exe)
3.安裝 NST 智慧卡讀卡機 驅動程式.
請依照下列步驟安裝:
1. 開機後，若已偵測到NST讀卡機裝置，請先按取消.
2. 先安裝scbase.exe和smclib.exe後，重新開機.
3. 開機後偵測到NST讀卡機裝置後，請選定安裝磁片中驅動程式
相關資料位置：A:\NSR2000U\NSR2KUSB.INF (NSR2KUSB.sys)
4. 安裝完成，重新開機
Windows 2000 (XP)
安裝元件順序:
1.請直接安裝 NST 智慧卡讀卡機 驅動程式.
(請勿安裝scbase.exe和smclib.exe)
請依照下列步驟安裝:
1. 開機後偵測到NST讀卡機裝置後，請選定安裝磁片中驅動程式
相關資料位置：A:\NSR2000U\NSR2KUSB.INF (NSR2KUSB.sys)
2. Windows XP安裝驅動程式完畢後，請執行A:\reader.reg
註：Windows 2000 安裝驅動程式完畢後，若有無法運作的情形，請執行A：\reader.reg
後重新開機。