NTE 69-RTC1 User manual

69−RTC1
RF Remote Touch RGB Controller/Dimmer
for RGB LED Strips
Description:
The 69−RTC1 RF remote touch dimmer is compatible with any LED RGB product. Unique touch tech-
nology, user−friendly operation, and ease of use make the 69−RTC1 the ideal device for automatically
controlling LED lights. The touch ring is used for easy color access and has 4 predefined pattern modes
(static color, gradual, hopping, and white light).
Functional Description:
D4 Predefined Patterns: Static Color, Gradual, Hopping, and White Light
DBrightness, Color, and Speed Control
DPower−Loss Memory Recovery Function
DTouch Surface with Full Color Selection Ring
Technical Specifications:
DFrequency: 433.92MHz
DInput Voltage: 12/24VDC
DOutput Current: 8A * 3Ch (12V) / 4A * 3Ch (24V)
DOutput Power: 216W (12V) / 288W (24V)
DPolarity: Common Anode
DWeight: 8.3oz. (235g)

Key Function Descriptions:
1. Power OFF
2. Power ON / Mode change
3. Speed +, static color saturation increase, white mode invalid
4. Speed −, static color saturation decrease, white mode invalid
5. Color ring, gradient mode, and white mode invalid
6. BRT+, brightness increase
7. BRT−, brightness decrease
8. Indicator
Linking Operation:
Power Supply DC 12−24V
Power Supply
Power
Supply
Power
Supply
LED Strip
LED Strip3 Channel
Controller
Amplifier
Amplifier
LED Strip
VCC
GND
R
G
B
VCC
R
G
B
VCC
R
G
B
VCC
R
G
B
VCC
Dimensions:
1.889 (48.0) 2.019 (51.29)
4.960
(126.0) 4.303
(109.29

Initial Synchronization of Remote Control and Receiver:
1. Install batteries into the remote control 2. Touch the brightness−decrease button to
initiate programming
3. Turn the power to the remote receiver on
(all 3 LED indicators light).
4. Touch the Power On button within 3 seconds
and the receiver’s indicator will turn blue. You
have now successfully programmed both
your remote and receiver.
* Remote receiver shown is for illustration purposes only