INSTRUCTION MANUAL
2
Thank you for using this smart tow tractor, for your safety and correct operation, Please read these
instructions carefully before using it .
Keep this manual on file for future reference . If this is lost, please contact your local supplier for a new copy.
Note: All of the information reported herein is based on data available at the moment of printing. The factory
reserves the right to modify its own products at any moment without notice and incurring any sanction. So it is
suggested to always verify possible updates.
1. OPERATING ENVIRONMENT AND WARNING
The smart tow tractor should be used in any dry space, on even and level floors or ground , The temperature
range in which the smart tow tractor can continuously operate is +5 ℃~ +30 ℃
zOperator appropriately trained, familiar with operating ,maintenance and safety instructions
zOperator must know and master the drive and operational properties of the smart tow tractor
zDo not exceed the rated capacity
zDo not modify the smart tow tractor without the manufacturer’s permission
zDo not add or remove ,weld or bend any parts
zDo not turn the smart tow tractor abruptly on a ramp
zNever use the smart tow tractor to transport people
zIn case of a malfunction, push the safety emergency switch(No.2,fig.2 ) on the speed regulator (No.4, fig.2 )
2. GERNERAL SPECIFICATION
Model Driver Pull power Battery Controller Charger
SM1000 DC motor 24v,300W 1000kg 2*12V/18Ah 70A 24V/3A
3. ATTACH HOOK TO MAINFRAME
3.1) Loosen and remove the setting Washer 8,Spring washer 8 and screw M8*25 (No.3,No.4,No.5,fig.1)
3.2) Put the joint plate under the mainframe and hook above the mainframe
3.3) Insert the washer 8,spring washer 8 and screw M8*25 ,Adjust hook height to appropriate position for moving
object, then tighten them securely.
