Nugens VCM200 User manual

Auto-Framing AI-4K Video
Conference Camera
VCM200
User Manual
Ver.2022

2
Contents
Attentions............................................................................................................................................................................................................3
1. Fast Installation................................................................................................................................................................................................4
1.1 Camera Interface ............................................................................................................................................................4
1.2 Camera Operation ..........................................................................................................................................................4
2. Product Overview ............................................................................................................................................................................................5
2.1 Product Introduction ......................................................................................................................................................5
2.1.1 Dimensions................................................................................................................................................................5
2.1.2 Accessories ................................................................................................................................................................5
2.2 Main Features.................................................................................................................................................................6
2.3 Technical Specifications..................................................................................................................................................7
2.4 Interface Instruction .......................................................................................................................................................8
2.4.1 External Interface ......................................................................................................................................................8
3. Application Instruction ....................................................................................................................................................................................9
3.1 Remote Controller ..........................................................................................................................................................9
3.1.1 Keys Instruction .........................................................................................................................................................9
3.1.2 Applications.............................................................................................................................................................10
3.2 MENU SETTING .............................................................................................................................................................11
4.Maintenance and Troubleshooting ................................................................................................................................................................14
4.1 Maintenance.................................................................................................................................................................14
4.2 Troubleshooting............................................................................................................................................................14
5.Copyright Statement.......................................................................................................................................................................................15

3
Attentions
This manual introduces functions, installation, and operations for the camera in details. Please read this manual
thoroughly before installation and use.
How to Use
To prevent damage to this product or any product connected to it, this product can only be used within the
specified range.
Do not expose the product to rain or moisture.
To prevent the risk of electric shock, do not open the case. Installation and maintenance should only be carried out by
qualified technicians.
Do not use the product beyond the specified temperature, humidity, or power supply specifications.
Wipe it with a soft, dry cloth when cleaning the camera lens. Wipe it gently with a mild detergent if needed. Do not use
strong or corrosive detergents to avoid scratching the lens and affecting the image.
Electrical Safety
Installation and use of this product must strictly comply with local electrical safety standards.
Handle with Care
Avoid damage to product caused by heavy pressure, strong vibration or immersion during transportation, storage,
and installation.
Install with Caution
Do not rotate the camera head violently, otherwise it may cause mechanical failure.
This product should be placed on a stable desktop or other horizontal surface. Do not install the product obliquely, otherwise
it may display inclined image.
If the camera is installed on TV or computer, the base can be fixed by four double-sided adhesive trays.
Housing of this product is made of organic materials. Do not expose it to any liquid, gas or solids which may corrode the
shell.
Ensure there are no obstacles within rotation range of theholder. 6). Do not power on before completely installation.
Do not Disassemble the Product Without Permission
This product contains no parts which can be maintained by users themselves. Any damage caused by dismantling
the product by user without permission is not covered by warranty.

4
1. Fast Installation
1.1 Camera Interface
Figure 1.1 camera interface
1. camera lens
3. built-in MIC
5. positioning hole
2. bracket
4. tripod fixing hole
6. USB 3.0 output interface
1.2 Camera Operation
1) Product Installation: Fix the device on LCD screen, top of computer; directly put it on desk
or on tripod mounting.
2) Connect camera via USB cable to computer, video conference terminal or other USB input
device, log in the video conference software and select a video device to have image
output.

5
2. Product Overview
2.1 Product Introduction
2.1.1 Dimensions
Figure 2.2 Camera Dimensions
2.1.2 Accessories
Check and confirm all accessories are provided as listed in sheet 2.1.
Accessories
User manual 1
Wireless remote controller
1 piece
USB3.0 cable 1 piece
Sheet 2.1 Product accessories

6
2.2 Main Features
This product is a new 4K UHD ePTZ video conference camera. It is built with AI functions, which can automatically frame all
people in the meeting and make them at the middle of the scene. It also has perfect functions and superior performance, which
adopts advanced ISP processing algorithms to provide vivid images with evenly clear brightness, strong color layering,
high resolution, and fantastic color rendition. Easy and convenient to install and maintain, stable and reliable.
⚫ 4K UHD: It employs 1/2.8 inch, 8 million pixels high quality CMOS sensor; supports 4K
UHD; provides 3840X2160@30fps video resolution at most; and provides clear UHD
video and vivid expressions and movements. At the same time, it is compatible with
1080p and 720p resolution.
⚫ EPTZ: EPTZ and 5X digital Zoom.
⚫ Built-in pickup: Includes 2 built-in pickups, all-round pickup. Antique noise suppression
algorithm ensures your voice be perfect. The effective pickup distance is up to 6 meters.
⚫ Auto framing: With excellent human recognition algorithm, automatically adjust the
zoom according to the number of people in the meeting. It can frame all the meeting
people and make them shown in the middle of the scene.
⚫ Wide view angle without distortion: 83°/ 100°/120° super wide view angle lens for
options.
⚫ Low Noise and High SNR: Low Noise CMOS effectively ensures high SNR of video. Image
is still clear even under low light condition.
⚫ Multiple Installations: Standard equipped with mold clamp. Easy to install on anydevices,
such as LCD screen, PC, table, and tripod.
⚫ Easy to Use: No need to download driver; USB Plug and play.
⚫ Wide Applications: Personal video conferencing, enterprise video conferencing,
unified collaboration etc.
⚫ Video output interface: video output interface USB 3.0.
⚫ Multiple audio and video compression standards: support YUY2, NV12, MJPG,
H264 video compression.

7
2.3 Technical Specifications
Camera Parameter
Image Sensor
1/2.8-Inch-High Quality 4K CMOS Sensor
Effective Pixels
8.28MP 16:9
Video output port
1* USB3.0, Type B, support audio output over USB3.0
Audio input
2 built-in MIC pickups
View Angle
138°(D)/120°(H)/68°(V)
Video Format
MJPG：3840*2160/2560*1440/1920*1080/1600*896 /1280*720 /1024*576 /960*540 /800*600
/800*448 /720*576/720*480 /640*480 /640*360 /480*270 /352*288
/320*240@30/25/20/15/10/5fps.
H264：3840*2160 /2560*1440 /1920*1080 /1600*896 /1280*720 /1024*576 /960*540 /800*600
/800*448 /720*576/720*480 /640*480 /640*360 /480*270 /352*288
/320*240@30/25/20/15/10/5fp.
YUY2：1920*1080 /1280*720 /1024*576 /800*600 /800*448 /640*480 /640*360 /480*270
/320*180@30/25/20/15/10/5fp.
NV12：1920*1080 /1280*720 /1024*576 /800*600 /800*448 /640*480 /640*360 /480*270
/320*180@30/25/20/15/10/5fp;
Min Illumination
0.1Lux (F1.8, AGC ON)
Lens
f=1.89mm
Aperture
F2.0±5%
Digital zoom
5X
Min illumination
0.1Lux (F1.8, AGC ON)
White Balance
Auto / Manual/ One push/ Specific Temperature
Focus
Fixed
Exposure
Auto / Manual/SAE/Bright
Auto framing
On/off/sensitivity
Backlight Compensation
On/off
Dual stream
On/off
SNR
>50dB
Feature
Operation Systems
Windows 8.1, Windows 10; macOS™ 10.10 or higher, Linux (Require supporting UVC.)
Video Compression format
YUY2、NV12、MJPG、H264
Audio over USB3.0
Support
USB communication protocol
UVC, UAC
PTZ control
Support EPTZ
Hardware
2.4 GHz Intel@ Core 2 Duo processor or higher, 2GB RAM or more, USB 2.0
requirement
/USB3.0 port (4K is required for USB3.0)

8
Other Parameters
Input Voltage
5V
Input Current
1A(Max.)
Power consumption
5W(Max.)
Store Temperature
-10℃～+60℃
Store Humidity
20%～90%
Working Temperature
-10℃～+50℃
Working Humidity
20%～80%
Dimension (W*H*D)
222mm×93.25mm×56.5mm
Weight
Around 0.53kg
Application
Indoor
Accessory
User Manual, remote controller, USB3.0 cable
2.4 Interface Instruction
2.4.1External Interface
The interface illustration is as Figure 2.4 below:
Figure.2.4 Interface Diagram

9
3. Application Instruction
3.1 Remote Controller
3.1.1Keys Instruction
1. Indicator Light
⚫Always on(red): send command.
⚫No light: no command is sent.
⚫Flashing:
◼Slow flashing: unpaired.
◼Flat flashing: paired.
2. Standby Key
Press button once to enter the standby mode and press it again
to restart the output video.
3. Menu
Enter/exit the OSD menu or return to the previous menu.
4. EPTZ
【】【 】【 】【 】keys control the electronic pan/tilt to move
up and down, left, and right, and the menu can be adjusted up and
down, left, and right.
【OK】Press the gimbal to return to the HOME position or enter
the next menu.
5. Number Key
Set or call 0-9 presets.
6. Focus Control Key (This Camera does not support)
Auto Focus: Enter auto focus mode.
Manual Focus: The camera focus mode is manual
Switch the camera focus mode to manual focus by pressing [focus
+] or [focus -] to adjust.
7. Auto Framing
Key combination use
Long Press 5s “SET” + “*” at the same time, the WR controller is
light on, releases hands. Power on the camera again, it will
successfully pair with WR controller.
Long Press 5s “SET” + “#” at the same time, the WR controller is
light on, releases hands. Power on the camera again, it will cancel
to paired with WR controller.

10
3.1.2Applications
Pairing: After the camera is turned on, press the "Zoom In" + "Zoom Out" button simultaneously within 30CM of the
camera when the remote control is powered on, release the button after the LED flashes for 3 seconds, enter the
pairing mode, the pairing is successful, the LED lights up for 2 seconds and then goes out. At this time, preset position
setting/calling, zooming, electronic PTZ control, Auto Framing on/off and other operations can be performed
through the infrared remote control.
Key Instruction:
The button method mentioned in this manual refers to the two actions of pressing and releasing the buttons on the
remote controller. For example, "pressing the [OK] key" refers to the action of pressing the [OK] key and then
releasing it. If you need to press the key for a long time, it will be specially explained in the manual.
Indicator Light
Red light keeps on: Send command.
Light off: Sending command.
Flashing light: slow-not pairing, fast-pairing.
Stand-by and menu setting
Turn on/off image.
Call OSD menu.
EPTZ
【 】: Move up
【 】: Move down
【 】: Move left
【 】: Move right
:
Long press the up, down, left, and right buttons, and it will continue to rotate from
slow to fast until it reaches the end of the stroke; release it in the middle to stop the
rotation.

11
Preset position setting, call out, and
delete
Number keys: 1, 2, 3
1. Save the preset position: long press (within 3s-5s) one of the number keys 1 to
3 to preset a preset position corresponding to the number key.
2. Calling the preset position: directly press the number keys 1 to 3 to call the saved
preset position.
3. Delete preset position: long press (5s) one of the number keys 1 to 3 to delete a
preset position corresponding to the number key.
Note: If the number key is not preset, it is invalid
Zoom control
【 】: Zoom out
【 】: Zoom in
Long press keys to keep zoom in/out
Combined press 【 】and 【 】for 3 seconds and release button when LED
flashing to enter pairing mode. When pairing is completed, the LED will be off after
flashing 2 seconds
Auto framing
Turn on/off auto framing function.
3.2 MENU SETTING
MENU
（Setup）
（Exposure）
（Color）
（Image）
（Noise Reduction）
（Version）
（Restore Default）
〔↑↓〕Select 〔← →〕Change Value
（1）Main Menu
Press the [MENU] key, the menu content will be displayed on the screen,
and use the scroll arrow to point to the selected item.
Setup
（Auto Framing）
Image style
Default
USB mode BULK
〔↑↓〕Select 〔← →〕Change Value
（2）Main Menu
Move the pointer to (Settings) in the main menu and press the [HOME]
key to enter the exposure page, as shown in the figure below.
Style options: default/normal /clarity/bright/soft
Auto Framing: Auto Framing on/off
USB mode: BULK, ISOC

12
Exposure
Mode Auto
EV OFF
BLC OFF
Flicker 50Hz
G.Limit 6
DRC 3
〔↑↓〕Select 〔← →〕Change Value
（3）Exposure
In the main menu, move the pointer to (Exposure), and press the [HOME]
key to enter the exposure page, as shown in the figure below.
Mode: Auto, Manual, SAE, Bright.
EV: On/Off (only available in auto mode)
Compensation Level: -7~7 (only available in auto mode when EV is ON)
BLC: ON/OFF for options (only available in auto mode)
Anti-Flicker: OFF/50Hz/60Hz for options (only available in Auto/ Bright
modes)
Gain Limit: 0~15(only available in Auto /Bright mode)
DRC: Off,1~8
SAE: 1/30, 1/50, 1/60, 1/90, 1/100, 1/120, 1/180, 1/250, 1/350, 1/500,
1/1000, 1/2000, 1/3000, 1/4000, 1/6000, 1/10000(only available in Bright
mode)
Bright: 0~23 (only available in Bright mode)
Color
WB Mode Auto
RG Tuning 0
BG Tuning 0
Saturation 30
Hue 4
AWB Sensitivity High
〔↑↓〕Select 〔← →〕Change Value
（4）Color Setting
Move the pointer to COLOR in the Main Menu, click the【HOME】and
enter the (COLOR SET) as follows:
WB Mode: automatic, manual, One push, VAR
Saturation: 0～50
RG Tuning: -10～10 (valid only in automatic mode)
BG Tuning: -10～10 (valid only in automatic mode)
Red gain: 0～255 (valid only in manual mode)
Blue gain: 0～255 (valid only in manual mode)
AWB Sensitivity: high, medium, low (valid only in auto mode)
Hue: settable items: 0～8
IMAGE
Brightness 50
Contrast 50
Sharpness 5
Flip-H OFF
Flip-V OFF
B&W Mode Color
Gamma Default
Low-Light Mode Close
〔↑↓〕Select 〔← →〕Change Value
（5）Image Setting
Move the pointer to IMAGE in the Menu, click the【HOME】and enter
the (IMAGE) as follows.
Brightness: 0~100
Contrast: 0~100
Sharpness: 0~15
Flip-H: On/Off
Flip-V: On/Off
B&W Mode: color, black/white
Gamma: default, 0.34、0.39、0.47、0.50
Low light mode: Close/Open

13
NOISE REDUCTION
NR-2D OFF
NR-3D 4
〔↑↓〕Select 〔← →〕Change Value
（6）Noise Reduction
Move the pointer to FOCUS on the Menu, click the【NOISE
REDUCTION】and enter the (NOISE REDUCTION) as follows:
2D noise reduction: auto, off, 1～7
3D noise reduction: off, 1～8
VERSION
Cam Version 1.0.3 2022-01-01
〔↑↓〕Select 〔← →〕Change Value
（7）Version
Move the pointer to VERSION.
RESTORE DEFAUIT
Restore Default? NO
〔↑↓〕Select 〔← →〕Change Value
（8）Restore Default
Move the pointer to RESTORE DEFAULT in the Main Menu, click
【HOME 】and enter RESTORE DEFAULT as below:
Restore default: Yes/No for options. (The video format and color style
won’t be restored)
Note: If the address of former remoter is not 1 but another one from 2,3,4, the corresponding camera
address will restore to 1 when all parameters or system parameters are restored. User should change the
remoter address to be 1 (press No.1 according to the camera so to get normal operation)

14
4.Maintenance and Troubleshooting
4.1 Maintenance
1. Please disconnect the camera if it is not used for a long time.
2. Use soft cloth or tissue to clean the camera cover.
3. Wipe it with a soft, dry cloth when cleaning the camera lens. Wipe it gently with a mild detergent if needed.
Do not use strong or corrosive detergents to avoid scratching the lens and affecting the image.
4.2 Troubleshooting
1. No video output
⚫Check whether USB cable connected well, and power indicator light is ON.
⚫Whether the machine could do self-check after restarted.
⚫Restart PC.
⚫Check whether the camera is well recognized by PC.
2. No image sometimes
⚫Check the USB cable quality and whether connected well.
3. Image dithering when zoom-in or zoom-out
⚫Check whether the camera installation position is solid.
⚫Whether there is shaking machine or objects around the camera.
4. Remote controller cannot work
⚫Re-match the camera and the wireless remote controller.
⚫Set the camera address to 1. (The camera address would be back to 1 after restore default setting)
⚫Check whether the battery is installed on the remote controller or low.
⚫Check the camera working mode is the normal operating mode.
⚫Exit the menu, the menu only displayed under MJPG/H.264/H.265 compression format.

15
5.Copyright Statement
All the contents in this manual and its copyright are owned by the company. No one is allowed to imitate, copy, or
translate this manual without the company’s permission. This manual contains no guarantee, standpoint expression
or other implies in any form. Product specification and information in this manual is for reference only and subject
to change without notice.
All rights reserved. No reproducing is allowed without acknowledgement.