Nugens ND-24 User manual

Nugens
24” Thin Bezel MONITOR
USER MANUAL
MODEL: ND-24

2
Content
1. Check the content.....................................................................................3
2. Installation.................................................................................................3
2.1 Connection.....................................................................................3
3. User’s Interface Control............................................................................3
3.1 OSD Control:..................................................................................3
3.2 Recommended Resolution and Mode ............................................4
4. Troubleshooting ........................................................................................5
5. Important Notice .......................................................................................5
5.1 Cleaning important notice ..............................................................5
5.2 Cautions on using the product .......................................................5
5.3 Power Cable and Signal Connecting cable ....................................6
5.4 Working Environment.....................................................................7
6. Function Adjusting ....................................................................................8
7. Product Specification ..............................................................................10

3
1. Check the content
Before beginning to use the display, please confirm the following items of
content are complete.
⚫1 x LCD liquid crystal display
⚫1 x power adapter
⚫1 set bracket (display stand)
⚫1 x user manual
2. Installation
If want to install all display to the host computer system, please operate
according to the following steps:
2.1 Connection
A. Connect VGA cable or HDMI cable to the host computer.
B. Plug in the power adapter of the display.
C. Power on the display: turn on the power of display and computer.
3. User’s Interface Control
3.1 OSD Control:
A. Press “MENU” button to view the OSD menu
B. Use the (+/-) button as “arrow keys” to choose from the OSD menu
C. Press “MENU” button (“OK” button) again to enter the selected title
D. Use the (+/-) button to adjust the setting value - higher or lower
value
E. Press “MENU” button again to save the new setting value
F. After saving the new setting value, press the “MENU” button again
to exit the OSD menu

4
3.2 Recommended Resolution and Mode
Recommend user to choose one kind of the following schemes:
Resolution
Horizontal scan
frequency (KHz)
Frame frequency
(Hz)
640*350
31.467 (+)
70.082 (-)
720*400
31.467 (-)
70.082 (+)
640*480
31.467 (-)
59.487 (-)
640*480
31.467 (-)
72.809 (-)
640*480
31.467 (-)
75.000 (-)
800*600
35.156 (+)
56.250 (+)
800*600
37.897 (+)
60.317 (+)
800*600
48.077 (+)
72.188 (+)
800*600
46.875 (+)
75.000 (+)
1024*768
48.363 (-)
60.004 (-)
1024*768
56.476 (-)
70.069 (-)
1024*768
60.023 (+)
75.029 (+)

5
4. Troubleshooting
Problem
Solutions
No display
⚫If the LED indicator light is off: Check
whether the cable is connected firmly.
⚫If LED indicates the light is off: Check
whether the connection of the HDMI or
VGA cable is firm at the same time,
and check whether the host computer
is turned on.
⚫Check whether horizontal
synchronization exceeds the range if
the LED indicator light shows green.
Picture unstable
(miscellaneous wave,
flickering, blurry, etc.)
⚫Check whether the connecting cable
(HDMI or VGA cable) is connected
well with the host computer.
⚫The rate (Hz) of monitor is compatible
with host computer.
5. Important Notice
5.1 Cleaning important notice
A. Please use the soft cloth to clean the LCD screen to remove dust
on screen.
B. Should not put pressure on the screen while polishing the screen
surface.
C. Please don’t use water and other chemical cleanser to polish the
screen surface of LCD, chemical drug may damage the screen
surface.
5.2 Cautions on using the product
Before using the product, please read these safety precautions for
proper use:
A. Do not conceal or block the heat dissipation hole under the
machine

6
B. Do not use sharp things, metal or liquid to stretch into or touch the
signal terminal or in the heat dissipation hole, to avoid a short
circuit and product damage.
C. If you have not used the product for a very long time, you shall pull
out the power cable from the wall power plug.
D. Do not try to resolve it by yourself or dismantle any parts of this
product, which may lead to damage to the product and injury to
the human body and make the product's guarantee void.
E. Do not touch the screen surface directly with the finger, may
damage the screen surface in this way, and very difficult to drive
out if the oil of the skin stays on the screen.
F. Do not exert pressure on the LCD screen, because the LCD
screen is very exquisite and fragile.
G. Must use the Power Supply provided by the original factory, to
avoid causing the products to be damaged.
H. Please pull out the Power adapter cable of this product in the
following situations:
◆If you do not use the product for some time.
◆If the cable or power plug is damaged.
Please assemble or adjust this product according to this user manual, if you meet
an unexpected condition while assembling this product, please pull out the Power
Supply cable first and contact us or our resellers/distributor as soon as possible.
5.3 Power Cable and Signal Connecting cable
A. Do not let any objects oppress Power Supply cable or signal
connecting cable.
B. Do not let Power Supply cable and signal connecting of this
product across walkway, or any places that people often pass by,
in case that the cable is trampled.
C. This product equips with three cables earth-type plug, this plug
only can adapt to earth-type outlet, this is a function of taking
security into account, if unable to insert it in the socket, please
consult your electrician to change old socket, should not give up
the earth type plug for the safety reason, if voltage of use area

7
where you locate is 220V-240V AC, should chose equipment cable
of additional ‘‘Tandem Blade’ plug as input terminal of 230V AC,
and should pay attention to this cable you choose must have
passed relevant safety certification and mechanism authentication.
D. Do not let outlet or cable overload.
E. Do not let cable or signal connecting cable of this product put at
strong moisture place.
5.4 Working Environment
A. Should not install this product on an unstable go-cart, shelf or
desk, this product may damage seriously because of dropping
from a high place.
B. Should install this product in a good ventilated environment
place when in use.
C. Should not install this product in the following environments:
Overheated, cold or highly moist places, places where
sunshine can shine directly, or places near the equipment will
cause a strong magnetic field.

8
6. Function Adjusting
Main Menu
Function Setting
Brightness: 0-100
Contrast: 0-100
Eco Mode: Standard, Movie,
Game, Internet
DCR: On/Off
Overdrive: On/Off
HDR: On/Off
H.Position: 0-100
V.Position: 0-100
Clock: 0-100
Phase: 0-100
Image Ration: wide, 4:3
Color Temp: Normal, Warm,
User, sRGB, Cool,
Red: 0-100
Green: 0-100
Blue: 0-100
Low Blue Mode: On/Off
Language: Muti-Country
H.Position: 0-100
V.Position: 0-100
Timeout: 5-100
Transparent: 0-100

9
Auto Configure
(Press to enter auto
configure)
Auto Color
(Press to enter auto color)
Reset
Black Level: 0-100
Input Select: HDMI, VGA
Mute: On/Off
Volume: 0-100

10
7. Product Specification
Screen size
23.8 inch
Panel type
IPS
Resolution
1920*1080
Screen refresh rate
75Hz
Visible area
527.04*296.46(mm)
Viewing angle
(horizontal/vertical)
178°
Contrast
1000:1
Brightness
250cd/m2
Pixel
233.1um*233.1um
Aspect ratio
16:9
Display color
16.7M
Response time
2ms
Anti blue light mode
YES
Overdrive processor
YES
DCR mode
YES
HDR mode
YES
Input
HDMI+VGA
Speaker
Built-in speaker
Wall mount specs
VESA 100*100mm
OSD language
Multi-lingual
Power
DC 12V/3A
Power consumption
<20W
Standby mode
0.5W
Tilt (up/down)
-5°~ 20°
Rotate (left/right)
-45°~ 45°
Flip
90°
Height Adjustment
14cm
Screen Dimensions
59*10*45cm
Weight
5KG
Accessories
Power adapter, voltage transformer, monitor stand

Nugens
24 型Thin Bezel 液晶螢幕
使用手冊
MODEL NO.: ND-24

2
目錄
1產品內容物............................................................................................................3
2安裝說明................................................................................................................3
2.1 連接方式....................................................................................................3
3按鈕界面說明........................................................................................................3
3.1 OSD 選單操作 ...........................................................................................3
3.2 解析度與模式............................................................................................4
4故障排除................................................................................................................4
5特別提醒事項........................................................................................................5
5.1 螢幕清潔方式............................................................................................5
5.2 注意事項....................................................................................................5
5.3 電源線與傳輸線........................................................................................5
5.4 使用環境....................................................................................................6
6功能介紹................................................................................................................7
7產品技術規格........................................................................................................9

3
1產品內容物
在開始使用 Nugens 液晶螢幕之前，請先檢查內容物是否完整。
⚫液晶螢幕 *1
⚫電源線 *1
⚫可旋式支架 *1
⚫使用手冊 *1
2安裝說明
請依照下列指示安裝本產品。
2.1 連接方式
（1）用VGA 傳輸線或 HDMI 傳輸線將液晶螢幕與電腦主機連接。
（2）將電源線插入螢幕並開啟電源。
（3）開啟螢幕與電腦主機。
3按鈕界面說明
3.1 OSD 選單操作
（1）按壓 “MENU” 鍵顯示 OSD 選單。
（2）使用 (+/-) 鍵選擇選單。
（3）再次按壓 “MENU” 鍵選定想要調整的項目(在此 MENU 鍵做
為OK 鍵)。
（4）使用 (+/-) 鍵調整數值。
（5）按壓 “MENU” 鍵儲存新的調整數值。

4
3.2 解析度與模式
建議使用者可選擇以下任一種方案，作為螢幕解析度的設定。
解析度
水平掃描頻率 (KHz)
幀率 (Hz)
640*350
31.467 (+)
70.082 (-)
720*400
31.467 (-)
70.082 (+)
640*480
31.467 (-)
59.487 (-)
640*480
31.467 (-)
72.809 (-)
640*480
31.467 (-)
75.000 (-)
800*600
35.156 (+)
56.250 (+)
800*600
37.897 (+)
60.317 (+)
800*600
48.077 (+)
72.188 (+)
800*600
46.875 (+)
75.000 (+)
1024*768
48.363 (-)
60.004 (-)
1024*768
56.476 (-)
70.069 (-)
1024*768
60.023 (+)
75.029 (+)
4故障排除
問題
解決方式
無顯示（黑屏）
⚫若LED 指示燈不亮：檢查電源線是否正確、
牢固。
⚫若LED 指示燈不亮：同時檢查 HDMI 或VGA
線的連接是否正確、牢固，並檢查主機是
否開機。
⚫若LED 指示燈顯示綠色：請檢查水平同
步是否超出範圍。
畫面輸出不穩定
（雜訊、閃爍、模糊等）
⚫檢查連接線（HDMI 或VGA 線）是否與主
機連接良好。
⚫螢幕的頻率 (Hz) 與主機是否相容。

5
5特別提醒事項
5.1 螢幕清潔方式
（1）請使用軟布去除螢幕上的灰塵。
（2）擦拭面板表面時，不應對面板施壓，以免造成破裂。
（3）請不要用水或其他化學清潔劑對螢幕表面進行拋光，化學藥物可
能會損壞螢幕表面。
5.2 注意事項
在使用本產品之前，請先閱讀安全注意事項以便能正確使用本產品：
（1）請勿阻擋或覆蓋機器下方的散熱孔。
（2）請勿使用尖銳物品、金屬或液體到訊號接收區或散熱孔內，以免
造成短路和產品損壞。
（3）如果長時間不使用本產品，應將電源線從牆上的電源插頭拔出。
（4）請勿嘗試自行修理或拆卸本產品的任何組件，否則可能導致產品
損壞或致人傷害，還會導致本產品的保固失效。
（5）不要用手指直接接觸螢幕表面，這樣可能會損壞螢幕表面，如果
皮膚的油脂留在螢幕上，也會比較難清除。
（6）不要對液晶螢幕施加壓力，因為液晶螢幕非常易碎。
（7）必須使用原廠提供的電源線，以免造成產品損壞。
（8）以下情況請拔出本產品的電源線：
⚫如果您有一段時間不使用本產品。
⚫如果電線或電源插頭損壞。
請根據本手冊組裝或調整本產品，如果您在組裝本產品時遇到任何非
正常情況，請先拔出電源線並儘快與我們聯繫。
5.3 電源線與傳輸線
（1）不要讓任何物體壓迫電源線或傳輸線。
（2）請勿讓連接本產品的電源線和傳輸線穿過走道，或任何會有人經
常經過的地方，以防電線被踩踏。
（3）本產品配備為三線接地型插頭，此插頭只能適合接地型插座。
這是考慮到安全的功能，如無法插入插座，請諮詢電工更換舊插
座，出於安全考慮，不應放棄接地型插頭，如果您所在使用區域
的電壓為 220V-240V AC，應選擇附加“Tandem Blade”插頭的
設備電線作為 230V AC 的輸入端子 ，並且要注意您選擇的此電
線必須通過相關的安全認證和機制認證。
（4）不要讓插座或電線過載。
（5）請勿將本產品的電線或傳輸線放置在潮濕的地方。

6
5.4 使用環境
（1）請勿將本產品安裝在不穩定的推車、架子或桌子上，本產品可能
會因從高處跌落而嚴重損壞。
（2）使用時應將本產品安裝在通風良好的環境中。
（3）不應將本產品安裝在以下環境，如過熱、寒冷或高度潮濕的地方，
陽光可以直射的地方，或設備附近會產生強磁場的地方。

7
6功能介紹
主選單
選單設定
亮度: 0-100
對比度: 0-100
情景模式: 標準、電影、遊戲、
網路
DCR: 開啟/關閉
Overdrive: 開啟/關閉
HDR: 開啟/關閉
水平位置: 0-100
垂直位置: 0-100
時脈: 0-100
相位: 0-100
圖像比例: 寬屏、4:3
色溫: 正常色、暖色溫、使用者
設定、sRGB、冷色溫
紅: 0-100
綠: 0-100
藍: 0-100
低藍光模式: 開啟/關閉
語言: 多國語言
水平位置: 0-100
垂直位置: 0-100
顯示時間: 5-100
透明度: 0-100

8
自動圖像調整
自動顏色調整
重設
數字亮度: 0-100
輸入選擇: HDMI、VGA
靜音: 開啟/關閉
音量: 0-100

9
7產品技術規格
螢幕尺寸
23.8 吋
面板類型
IPS
解析度
1920*1080
更新頻率
75Hz
顯示區域
527.04*296.46(mm)
可視角度(水平/垂直)
178°
對比度
1000:1
亮度
250cd/m2
畫素
233.1um*233.1um
長寬比
16:9
螢幕色彩
16.7M
螢幕更新率
75Hz
反應時間
2ms
低藍光模式
YES
OverDrive 加速
YES
DCR 模式
YES
HDR 模式
YES
輸入端子
HDMI+VGA
音訊
內建喇叭
壁掛規格
VESA 100*100mm
OSD 語言
多國語言
電源
DC 12V/3A
消耗功率
<20W
耗電量(待機模式)
0.5W
傾斜(向下/向上)
-5° ~ 20°
旋轉(向左/向右)
-45° ~ 45°
翻轉
90°
高度調整
14cm
螢幕尺寸
59*10*45cm
重量
5KG
配件
電源線、變壓器、支架

限用物質含有情況標示聲明書
設備名稱 Equipment name：24 型液晶螢幕，型號（型式）Type designation (Type)：ND-24
單元Ｕnit
限用物質及其化學符號
Restricted substances and its chemical symbols
鉛Lead
(Pb)
汞Mercury
(Hg)
鎘Cadmium
(Cd)
六價鉻 Hexavalent
chromium(Cr+6)
多溴聯苯
Polybrominated
biphenyls(PBB)
多溴二苯醚
Polybrominated diphenyl
ethers(PBDE)
外框
○
○
○
○
○
○
背殼
○
○
○
○
○
○
電路板組件
○
○
○
○
○
○
底座
○
○
○
○
○
○
其它固定組件(螺絲)
○
○
○
○
○
○
備考 1.〝超出 0.1 wt %〞及〝超出 0.01 wt %〞係指限用物質之百分比含量超出百分比含量基準值。
Note 1：“Exceeding 0.1 wt %”and “exceeding 0.01 wt %”indicate that the percentage content of the restricted substance exceeds the reference
percentage value of presence condition.
備考 2.〝○〞係指該項限用物質之百分比含量未超出百分比含量基準值。
Note 2：“○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.
備考 3.〝－〞係指該項限用物質為排除項目。
Note 3：The “−”indicates that the restricted substance corresponds to the exemption.
茲切結保證所提供之商品限用物質含有情況標示內容係經執行測試作業或採適
當之品質管理措施，並備置前述相關文件，確認正確無誤後提供貴局。並同意
配合貴局執行後市場管理作業所需，依商品檢驗法第49條之規定，於限期28個
工作天內提供相關證明文件以供審查。
I hereby ensure that “the presence conditions of the restricted substance” provided above have been proved by testing or appropriate quality
control measures, and make sure the relevant documents provided are correct and ready. Also, I agree to cooperate with BSMI, as the Article
49 of the Commodity Inspection Act stipulates, to provide the relevant documents, if needed, for verification within 28 working days when
BSMI carries out the market surveillance activities.