Nugens ND-24T User manual
- 1 -
Touch Monitor
Quick Installation Guide
ND-24T
- 2 -
▼Disclaimer
The specifications and information contained in this manual are for reference
only, and the content and information are subject to change without prior
notice.
If other product or company names appear in the content of the manual, they
are only used to describe the product description, and there is no intention of
infringement.
Nugens reserves the right to update this disclaimer at any time.
▼Warnings and Precautions
Excessive use may damage eyesight.
(1) Please rest for 10 minutes after using for 30 minutes.
(2) Children under the age of 2 should not watch the screen, and children over
the age of 2 should not watch the screen for more than 1 hour a day.
▼Instructions
After taking out the product, install it according to the installation manual.
Please keep it away from heat sources and humid environments.
Product performance may vary in different environments.
▼Safety Instructions
Before using the product, please read these safety precautions for proper use:
Do not conceal or block the heat dissipation hole under the machine.
⚫Do not use sharp things, metal, or liquid to stretch into or touch the signal
terminal or in the heat dissipation hole, to avoid short circuit and product
damage.
⚫If you have not used the product for a very long time, you shall pull out the
power cable from the wall power plug.
⚫Do not try to resolve it by yourself or dismantle any parts of this product,
which may lead to damage to the product and injury to the human body
and make the product's guarantee void.
⚫Do not touch the screen surface directly with your finger, may damage the
screen surface in this way, and it is very difficult to drive out if the oil of the
skin stays on the screen.
⚫Do not exert pressure on the LCD screen, because the LCD screen is
very exquisite and fragile.
- 3 -
⚫Must use the Power Supply provided by the original factory, to avoid
causing the products to be damaged.
⚫Please pull out the Power adapter cable of this product in the
following situations:
1. If you do not use the product for some time.
2. If the cable or power plug is damaged.
Please assemble or adjust this product according to this user manual. If you meet an unexpected
condition while assembling this product, please pull out the Power Supply Cable first and contact
us or our resellers/distributor as soon as possible.
Overview
【Appearance】
- 4 -
【Specification】
Monitor Specs
Screen size
23.8 inch
Panel
VA
Aspect ratio
16:9
Resolution
1920 x 1080 @60HZ
Display color
16.7M
Brightness
450cd/m2
Response time
5ms (MPRT)
Viewing angle
(horizontal/vertical)
H: 180°
V: 180°
Visible area
409.8×230.4 (mm)
Contrast
1000:1
Video input format
(analog) RGB
Touch Screen
Touch Type
Capacitive sensing
Touch input interface
USB
Touch response time
5ms
Maximum working time
50,000 hours
Valid touch screen
times
>1,000,000 times
Touch screen mode
Finger, stylus
Touch point
10-point-touch
Interfaces/Power
Interfaces (Ports)
HDMI 1.4 x 1 port
VGA x 1 port
USB 2.0 x 1 port
3.5mm audio x 1 port
Power DC in x 1 port
Voltage
DC 12V / 3A
Power consumption
<25.7W
- 5 -
Power consumption
(Standby)
0.1W
Appearance
Specs
VESA
100 x 100mm
Speaker
8W x 2
Screen coating
Anti-Glare with hard-coating
3H
Monitor stand
Metal
Tilt angle
90 degree
Additional
Function
OSD
AUTO, -, +, MENU, POWER
(Brightness, Contrast, Auto
Adjust, Phase Position, Clock,
Language, Function, Install,
Reset)
Low Blue Light
YES (Manual)
Plug and Play
No driver needed
YES
Water Resistant Panel
YES
Operating Environment
Operating Temp.: -10 - 60°C
Storage Temp.: -20 - 70°C
Operating humidity: 20%-80%
Storage humidity: 10% - 90%
Operating System
Windows, Linux, Mac
Product Size
566.9 x 351.7mm
Product Weight
Without based: 3.85kg
With based: 5.05kg
Certification
CE, FCC, ROHS
Package Contents
1. ND-24T x 1
2. Transformer x 1
3. HDMI Cable x 1
4. VGA Cable x 1
5. USB 2.0 Cable x 1
6. Stylus x 1
7. Metal Stand x 1
8. Quick Installation Guide x 1
- 6 -
Instructions
Thank you for purchasing the ND-24T 23.8” 1080P Touch Monitor.
Please use the included USB cable to connect the monitor to your computer
before using the touch function.
(Please use touch function on operating systems and applications that
support touch)
*The schematic diagram is for reference only, and the hole configuration is
subject to the actual product
This product adopts capacitive sensing, has 10-point multi-touch, and
provides metal brackets and supports wall mounting. Simply adjust the tilt
angle to the most comfortable position (support horizontal), and it is stable
when touching, allowing you to experience it easily and at ease.
- 7 -
Troubleshooting
◆The display image or color is not clear
Please confirm whether the connection line is well connected.
Use the OSD screen display settings and go to the menu to adjust the
brightness or color contrast.
◆The touch function is not allowed or no touch function
Unplug and plug in the power cord again and use the USB transmission cable
supplied by Nugens to connect to the computer to make the OSD. The touch
function settings are calibrated again.
Please clean the screen surface in the correct way to prevent the dirt on the
glass from affecting the touch operation.
- 9 -
Table of contents
Other Nugens Monitor manuals
