Numark MIXSTREAM PRO User manual

Confidential Numark Service Manual
Numark
Mixstream Pro
[NH08]
Service Manual
v1.0
2021-10-20
The information in this document contains privileged and confidential information. It is intended only for the use of
those authorized by Numark. If you are not the authorized, intended recipient, you are hereby notified that any review,
dissemination, distribution or duplication of this document is strictly prohibited. If you are not authorized, please
contact Numark and destroy all copies of this document. You may contact Numark at [e-mail].
© Copyright Numark
ATTENTION!
This document contains sensitive proprietary information.
All recipients must have a current non-disclosure agreement on file
with Numark.
Do not make illegal copies of this document.

Confidential Numark Service Manual
Preface
This document is intended to assist the service technician in the operation, maintenance and repair of the Numark
device. Together with the User Reference Manual, this document provides a complete description of the
functionality and serviceability of the Device. Any comments or suggestions you may have pertaining to the
document are welcome and encouraged.
Read This!
In addition to any purchase price that Numark may charge as consideration for Numark selling or otherwise
transferring this service manual (“Manual”) to you, if you are not a service and repair facility (“Service Center”)
authorized by Numark in writing to be an authorized Service Center, Numark sells or transfers the Manual to you on
the following terms and conditions:
Only Service Centers authorized by Numark in writing are authorized to perform service and repairs covered by an
Numark warranty (if any), and transfer of the Manual to you does not authorize you to be an authorized Service
Center. Therefore, if you perform, or if the Manual is used to perform, any service or repairs on any Numark
product or part thereof, any and all warranties of Numark as to that product and any service contract with
Numark for that product shall be voided and shall no longer apply for such product, even if your services or
repairs were done in accordance with the Manual.
All service or repairs done by you or with reference to the Manual shall be solely your responsibility, and Numark
shall have no liability for any such repairs or service work. All such service or repairs are performed at the sole
risk of the person performing the service or repairs. You agree that all such work will be performed in a
competent, professional and safe manner at all times and to indemnify and fully hold Numark and its successors
and assigns harmless in the event of any failure to so perform.
Your purchase of the Manual shall be for your own ultimate use and shall not be for purposes of resale or other
transfer.
As the owner of the copyright to the Manual, Numark does not give you the right to copy the Manual, and you agree
not to copy the Manual without the written authorization of Numark. Numark has no obligation to provide to you
any correction of, or supplement to, the Manual, or any new or superseding version thereof.
Numark shall have the right to refuse to sell or otherwise transfer repair parts or materials to you in its sole
discretion. You shall not use, sell or otherwise transfer spare or replacement parts supplied by Numark to you (i) to
repair or be used in products manufactured for or by third parties or (ii) to any third parties for any purpose.
You shall not make any warranties or guarantees with respect to the products of Numark or the use thereof on
behalf of Numark or in your own name.
The foregoing describes the entire understanding related to sale or transfer of the Manual to you, and no other
terms shall apply unless in a writing signed by an authorized representative of Numark.
All Trademarks are property of their respective companies.

Confidential Numark Service Manual
Warnings
TO REDUCE THE RISK OF ELECTRIC SHOCK OR FIRE, DO NOT EXPOSE THIS PRODUCT TO WATER OR
MOISTURE.
The arrowhead symbol on a lightning flash inside a triangle is intended to alert the user to
the presence of uninsulated “dangerous voltage” within the enclosed product which may
be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point inside a triangle is intended to alert the user to the presence of
important operating, maintenance and servicing instructions in the literature which
accompanies the product.
REPAIR BY ANY PERSON OR ENTITY OTHER THAN AN AUTHORIZED NUMARK SERVICE CENTER
WILL VOID THE NUMARK WARRANTY.
PROVISION OF THIS MANUAL DOES NOT AUTHORIZE THE RECIPIENT TO COMPETE WITH ANY
NUMARK DISTRIBUTOR OR AUTHORIZED REPAIR SERVICE CENTER IN THE PROVISION OF REPAIR
SERVICES OR TO BE OR MAKE REPAIRS AS AN AUTHORIZED SERVICE CENTER.
ALL REPAIRS DONE BY ANY ENTITY OTHER THAN AN AUTHORIZED NUMARK SERVICE CENTER
SHALL BE SOLELY THE RESPONSIBILITY OF THAT ENTITY, AND NUMARK SHALL HAVE NO LIABILITY
TO THAT ENTITY OR TO ANY OTHER PARTY FOR ANY REPAIRS BY THAT ENTITY.
Regarding the Power Supply Fuse
Caution: The product under service may employ the use of a replaceable fuse. Danger of
fire or electrocution if fuse is incorrectly replaced. Replace with only the same type or
equivalent type recommended by the equipment manufacturer.
Regarding the Internal Battery
Caution: The product under service may employ the use of a internal battery. Danger of
explosion if battery is incorrectly replaced. Replace only with the same or equivalent type
recommended by the manufacturer. Dispose of used batteries according to the
manufacturer’s instruction.

Confidential Numark Service Manual
Safety Instructions
Carefully read the applicable items of the operating instructions and these safety suggestions before using this
product. Use extra care to follow the warnings written on the product itself and in the operating instructions. Keep
the operating instructions and safety suggestions for reference in the future.
1. Power Source. The product should only be connected to a power supply which is described either in the
operating instructions or in markings on the product.
2. Power Cord Protection. AC power supply cords should be placed such that no one is likely to step on the
cords and such that nothing will be placed on or against them.
3. Periods of Non-use. If the product is not used for any significant period of time, the product’s AC power supply
cord should be unplugged from the AC outlet.
4. Foreign Objects and Liquids. Take care not to allow liquids to spill or objects to fall into any openings of the
product.
5. Water or Moisture. The product should not be used near any water or in moisture.
6. Heat. Do not place the product near heat sources such as stoves, heat registers, radiators or other heat
producing equipment.
7. Ventilation. When installing the product, make sure that the product has adequate ventilation. Improperly
ventilating the product may cause overheating, which may damage the product.
8. Mounting. The product should only be used with a rack which the manufacturer recommends. The
combination of the product and rack should be moved carefully. Quick movements, excessive force or uneven
surfaces may overturn the combination which may damage the product and rack combination.
9. Cleaning. The product should only be cleaned as the manufacturer recommends.
10. Service. The user should only attempt the limited service or upkeep specifically described in the operating
instructions for the user. For any other service required, the product should be taken to an authorized service
center as described in the operating instructions.
11. Damage to the Product. Qualified service personnel should service the unit in certain situations including
without limitation when:
a. Liquid has spilled or objects have fallen into the product,
b. The product is exposed to water or excessive moisture,
c. The AC power supply plug or cord is damaged,
d. The product shows an inappropriate change in performance or does not operate normally, or
e. The enclosure of the product has been damaged.

SPECIFICATION
FUNCTION
1. Touchscreen: This full-color, multi-touch display shows information relevant to
Mixstream Pro's current operation. Touch the touchscreen (and use the hardware
controls) to control the Mixstream Pro interface.
2. Browse Knob: Turn this knob to navigate through lists. Press the knob to move forward
in the touchscreen or select a song to load on either deck.
Press and hold Shift and press this knob to load the selected track to the Prepare list.
3. Load : Press this button to load the selected track to Deck 1. Quickly double-press this
button to instant double the track currently playing on Deck 2 to Deck 1.
4. Load : Press this button to load the selected track to Deck 2. Quickly double-press this
button to instant double the track currently playing on Deck 1 to Deck 2.
5. Back: Press this button to move back in the touchscreen.
6. View: Press this button to cycle between the Library and Performance views.
Hold Shift and press the View button to switch between simple view or horizontal and
vertical waveform views in Performance Mode.
7. Source / Eject: Press this button to open the Source menu.
Press and hold Shift and press this button to display a list of connected media devices
on the touchscreen. Tap one of the listed media sources to eject that device. To prevent
data corruption, drives must be ejected before being removed from the player.
8.Utility/Preferences / WIFI: Press this button to show the Utility/Preferences menu. See the
User Guide for more information.
Press and hold Shift and press this button to open the Wi-Fi connection menu and
connect to a wireless network.
9. Shift: Press and hold this button to access secondary functions of other controls.
10. Channel Level: Turn this knob to adjust the level of the pre-fader, pre-EQ audio signal
for the channel.
11. Channel EQ: Turn these knobs to boost or cut the high, mid-range, and low frequencies
for the channel.
12. Filter: Turn this knob to apply a filter to the channel. Starting from the center (12:00)
position, turn it counter-clockwise to apply a low-pass filter, or turn it clockwise to apply
a high-pass filter.
13. FX Select: Press these buttons to enable or disable the selected effect: Echo, Delay,
Flanger or Phaser.
SERVICE MANUAL
MODEL: Mixstream Pro

14.Effects Toggle: Move this toggle switch away from you to activate the selected effect—
the toggle will latch to that position. Pull the toggle back to the center position to
deactivate the effects.
Pull and hold this toggle toward you to activate the selected effect momentarily, and
release the toggle to deactivate the effect—the toggle will return to the center position.
15.Channel Fader: Use this fader to adjust the channel’s volume level.
16. Crossfader: Use the crossfader to mix between Deck 1 and Deck 2.
17. Main Level Meters: These LEDs display the audio signal level of the main mix (sent out
of the Main Outputs).
18. Headphone Preview: Press this button to preview the channel in the headphones. Use
the Headphone Mix knob to adjust the mix between the channel’s pre-fader signal and
the headphones’ cue channel.
19. Headphone Mix: Turn this knob to adjust the blend of the pre-fader and master channels
together in the headphones.
20. Headphone Volume: Adjusts the volume for headphone cueing.
21. Platter: This capacitive, touch-sensitive platter controls the audio playhead when the
wheel is touched and moved.
22. Play/Pause: This button pauses or resumes playback.
Press and hold Shift and then press this button to “stutter-play” the track from the initial
cue point.
23. Pitch Fader: Move this fader to adjust the speed (pitch) of the track.
Press and hold Shift and then press one of the Pitch Bend buttons to adjust the total
range.
24.Pitch Bend –/+: Press and hold one of these buttons to momentarily reduce or increase
(respectively) the speed of the track.
Press and hold Shift and then press one of these buttons to set the range of the pitch
fader.
25. Performance Pads: These pads have different functions on each deck depending on the
current pad mode. See the full User Guide for more information.
26. Cue: Press this button to enter Cue mode. Press the button again to enter a second bank
of cues. To assign a cue to a pad, press a pad at the desired location in the track. To
clear a cue from a pad, press Shift and
the desired pad.
27.Auto Loop: Press this button to enter Auto Loop mode. Press the button again to enter a
second bank of auto loop lengths. To activate an auto loop, press a pad. To deactivate
an auto loop, press the pad again.
28. Roll: Press this button to enter Roll Mode. Press the button again to enter a second bank
of roll lengths. To trigger a roll, press a pad.
29. Main Level: Turn this knob to adjust the volume level of the Main Outputs.
30. Speaker Level: Turn this knob to adjust the volume level of the speakers.

DISASSEMBLY PROCEDURES
1. REMOVAL OF THE BOTTOM CHASSSIS . (Fig1)
(A) TAKE OUT THE 5 PCS VR CAP AND 15 PCS KNOB AND 15 PCS NUTS FROM OF TOP HOUSING.
(B) TAKE OUT THE 16 PCS SCREWS FROM OF BOTTOM CHASSIS.
(Fig.1)

2. REMOVAL OF REAR PCB AND PADDLE PCB AND FRONT PCB. (Fig.2)
(A) REMOVE THE 3 PCS SCREWS AND 3 PCS CONNECTORS BEFORE REMOVAL OF REAR PCB .
(B) REMOVE THE 4 PCS SCREWS AND 2 PCS CONNECTORS BEFORE REMOVAL OF PADDLE PCB .
(C) REMOVE THE 4 PCS SCREWS AND 1 PC CONNECTOR BEFORE REMOVAL OF FRONT PCB .
(Fig.2)

3. REMOVAL OF TOP LEFT&RIGHT (DIP) PCB AND SENSOR PCB AND TOUCH PCB AND FILTER1 PCB
AND CUE PCB. (Fig.3)
(A) REMOVE THE 14 PCS SCREWS AND 1 PC CONNECTOR BEFORE REMOVAL OF TOP RIGHT PCB DIP
ASSEMBLY .
(B) REMOVE THE 2 PCS SCREWS BEFORE REMOVAL OF TOUCH PCB SMT/AI ASSEMBLY.
(C) REMOVE THE 3 PCS SCREWS AND 1 PC CONNECTOR BEFORE REMOVAL OF TOP LEFT FILTER1 PCB DIP
ASSEMBLY.
(D) REMOVE THE 3 PCS SCREWS AND 1 PC CONNECTOR BEFORE REMOVAL OF TOUCH PCB SMT/AI ASSEMBLY.
(E) REMOVE THE 2 PCS SCREWS AND 1 PC CONNECTOR BEFORE REMOVAL OF TOP LEFT CUE PCB DIP
ASSEMBLY.
(F) REMOVE THE 14 PCS SCREWS BEFORE REMOVAL OF TOP LEFT PCB DIP ASSEMBLY.
(G) REMOVE THE 3 PCS SCREWS AND 1 PC CONNECTOR BEFORE REMOVAL OF TOUCH PCB SMT/AI ASSEMBLY.
(H) REMOVE THE 5 PCS SCREWS BEFORE REMOVAL OF 7 INCH CTP+TFT ASSEMBLY.
(Fig.3)

LEVEL P/N DESCRIPTION QTY REF
0.1 BAGTM-110M Wire 2 74
0.1 BAMS939BK Elastic Adhesive 36
0.1 BAPC-02HK Cable Clamp 1 15
0.1 BART-K00701 Rotate Knob 1 58
0.1 BAW-0023A Washer(6*3.2*0.5MM) 2
0.1 CA040218004 USB 2.0 1.8M A/B Black CORE 1
0.1 CN010000502 Flat Cable GND Wire Black f3.6 Length 50mm 1
0.1 CN010001003 Flat Cable GND Wire Black f3.6 Length ught 100mm 1
0.1 CN0520001010 Flat Cable 5Pin Length 100mm 2 65
0.1 CN0520002004 Flat Cable 5Pin Pitch 2.0mm Single Row 1 64
0.1 CN0620001014 Flat Cable 6Pin Pitch 2.0mm Single Row 1 67
0.1 CN0620001504 Flat Cable 6P Pitch 2.0mm Single Row 1 66
0.1 CN0620002512 Flat Cable 6Pin Pitch 2.0mm Single Row 1 68
0.1 CN0820000505
Flat Cable 8Pin Length 50mm Female Heade
2 70
0.1 EVA1104466 EVA(10*7*2T) 2
0.1 FFC3010001001 FFC 30Pin Pitch:1.0mm Length:100mm 1 71
0.1 K46-1 Wire Tie 4 75
0.1 LAC22MAR1128 Serial Number Label 1 63
0.1 LAC52MAR1086 Warning Label(Sotsheet) 1
0.1 LAC54MAR1164 Saety Label 1 62
0.1 LAC62MAR1129 Bar Code Label(CODE 39) 1
0.1 LAC62MAR1130 Bar Code Label 2
0.1 LAC62MAR1158 INNER BOX LABEL 1
0.1 LAC64MAR1138 TELEC LABEL 1 79
0.1 LAC67MAR681 Label(Circle Limpid) 2
0.1 LAC67YAH261 Label f8mm Green 1
0.1 MT11018108 Ground Plate 2 12
0.1 MT11018117 Ground Plate 1 56
0.1 MT11044183 Holder Screw 1 14
0.1 MT1105552 Copper 2 11
0.1 MT1105581 Copper 1 16
0.1 MT1130021701 Speaker Plate(LEFT)(Painting) 1 22
0.1 MT1130021801 Speaker Plate(RIGHT)(Painting) 1 23
0.1 NM1104474 Acoustic Absorber 6 21
0.1 NM1106115 Velvet Carpet 4 20
0.1 NP311MAR280 Wheel Plate 2 7
0.1 NP511MAR285 Isolate Foot 1 88
0.1 NUT0103INI Nut 3M/M 2 81
0.1 OT7459135110 FFC 31Pin Pitch:0.3mm Length:2 1 72
0.1 OTDB1EM60-I0195 PCB Antenna 1 86
0.1
OTUMOH9522MD-T
7 Inch CTP+TFT Assembly 1 13
0.1 PNH08MAR21~24/26 Pack Assembly 1
..2 BC1015025000 Bubble Pad 1
..2 CGNH08310MAR01 Inner Box 1
..2 CTNH08513MAR01 Carton 1
..2 GEMAR122 Poster 1
..2 LAC67MAR1093 LOGO Label(Numark) 1
..2 NM1504452 Cleaning Cloth 1
..2 OPNH08MAR01 Instruction Book 1
..2 OPNK14MAR13 Saety Manual(1372-H) 1
..2 PE230440404B09 PE Bag 1
..2 PLNH0801 Polyoam(Let) 1
..2 PLNH0802 Polyoam(Right) 1
..2 SD77045000 Sot Sheet 1
0.1 PNH08MAR2A Pack Assembly 1
..2 BC1015025000 Bubble Pad 1
..2 CGNH08310MAR01 Inner Box 1
..2 CTNH08513MAR01 Carton 1
..2 GEMAR122 Poster 1
..2 LAC67MAR1093 LOGO Label(Numark) 1
NH08MAR21~24/27/2A BOM

..2 NM1504452 Cleaning Cloth 1
..2 OPNH08MAR03 Instruction Book(China) 1
..2 OPNK14MAR13 Saety Manual(1372-H) 1
..2 PE230440404B09 PE Bag 1
..2 PLNH0801 Polyoam(Let) 1
..2 PLNH0802 Polyoam(Right) 1
..2 SD77045000 Sot Sheet 1
0.1 PNH08MAR2A Pack Assembly 1
..2 BC1015025000 Bubble Pad 1
..2 CGNH08310MAR01 Inner Box 1
..2 CTNH08513MAR01 Carton 1
..2 GEMAR122 Poster 1
..2 LAC67MAR1093 LOGO Label(Numark) 1
..2 NM1504452 Cleaning Cloth 1
..2 OPNH08MAR02 Instruction Book(JP) 1
..2 PE230440404B09 PE Bag 1
..2 PLNH0801 Polyoam(Let) 1
..2 PLNH0802 Polyoam(Right) 1
..2 SD77045000 Sot Sheet 1
0.1 PT1110657403 Button Assembly(SATIN) 2 31
0.1 PT1110659301 KNOB (Painting) 1 3
..2 PT11106593 Knob(MED) 1
0.1 PT1110673302 Rotate Button(Painting) 2 44
..2 PT11106733 ROTATE BUTTON 2
0.1 PT11106756 Knob(MEDV) 6 4
0.1 PT1110677705 Button (1) Printing 1 37
..2 PT11106777 Button 1
0.1 PT1110677706 Button (2) Printing 1 38
..2 PT11106777 Button 1
0.1 PT1110678502 Button(BACK) Printing 1 36
..2 PT11106785 Button 1
0.1 PT1110678503 Button(VIEW) Printing 1 39
..2 PT11106785 Button 1
0.1 PT11106794 VR Cap 2 6
0.1 PT1110680801 Button(Phone)(Printing) 2 42
..2 PT11106808 Button 2
0.1 PT1110682301 Button (SHIFT)Painting& Printi 2 32
..2 PT11106823 Butto 2
0.1 PT1110710601 Wheel(Painting) 2 9
..2 PT11107106 Wheel 2
...3 LAC67MAR1153 Label 2
...3 MT11055118 Jog Axis 2
...3 PM-PA-707 ABS(PA-707) 0.24
...3 PMP005-100 Black Masterbatch 0
0.1 PT1130211001 Cabinet Printing(painting) 1 17
..2 PT11302110 Cabinet 1
0.1 PT11303132 Bottom Chassis 1 59
..2 TP1190310T Protective ilm 1.3
0.1 PT1510611001 Power Button(Painting) 1 54
..2 PT15106110 Power Button 1
0.1 PU008008005 Conductire Foam 3 76
0.1 PU010010025 Conductive sponge 2 8
0.1 PW63100UC01 AC Power SUPPLY Cord 1M UL+CSA(21) 1
PW33100EU01 AC Power SUPPLY Cord 1M EU(22)
PW53100UK01 AC Power SUPPLY Cord 1M UK(23)
PW43100SAA02 AC Power SUPPLY Cord 1M SAA(24)
PW33180KS01 AC Power SUPPLY Cord Long 1.8M KS(26)
PW63100JIS01 AC Power SUPPLY Cord 1M JIS(27)
PW63100CCEE02 AC Power SUPPLY Cord 1M CCC(2A)
0.1 RN4100001 CS Ring(10mm) 2 19
0.1 RU1104442 Rubber 2 77
0.1 RU1104444 Rubber Foot 1 89
0.1 RU1110621401 Rubber Button(PAD) Printing 2 33

0.1 RU1110621501 Rubber Button Printing 1 41
0.1 RU1530608 Rubber Foot 6 61
0.1 SC0308PBBI Screw M3X8 PBB Tapping 4 60
0.1 SC0308PBNI Screw 54 25
0.1 SC0308RINI Screw M3X8 PPN 2 82
0.1 SC0310RBBI Screw M3X10 PPB Tapping 16 78
0.1 SC0310WANI Screw M3X1012 PPWN W/Washer 7 18
0.1 SC0312PBBI Screw M3X12 PPB Tapping 18 73
0.1 SPK-PASSIVE007 Passive radiator speaker round 2 27
0.1 SPSAFSP036RHBN3 Switch Adaptor 12V/3A(21/22/23/24/26/27) 1
SPS048G-120300D Switch Adaptor 12V/3A CCC(2A)
0.1 TP021215GA 3M Double Sided Tape (T=3.2MM) 2 87
0.1 TP021215GA 3M Double Sided Tape (T=3.2MM) 2 80
0.1 TWPT1110649802 Knob(18.0mm)Assembly 2 1
..2 PT11106498 Knob(18.0mm) 2
..2 PT11106499 Decoretive(18.0mm) 2
..2 PT1130030 Knob Plate(18.0MM)(Black) 2
0.1 TWSPK1R80100403 Speaker 1.8in 10W Assembly 1 24
..2 CN0220002512 Flat Cable 2Pin Length 250mm 1
..2 SPK1R80100401 Speaker 1.8in 10W 4 ull ran 1
0.1 TWSPK1R80100404 Speaker 1.8in 10W Assembly 1 26
..2 CN0220004009 Flat Cable 2Pin Length 400mm 1
..2 SPK1R80100401 Speaker 1.8in 10W 4 ull ran 1
0.1 UHKCF-50-B LOOP CORE 2 84
0.1 UHKCF-80-B Core KCF-80-B 20.5*20*7.5 2 85
0.1 WR0920002505 Shielding Cable 9Pin Single Ro 1 69
0.1 WS116010305O Washer 2 10
0.1 WS1200140030 Washer(O20xO14x0.3t) 1
0.1 TWPC19C03301 TOP LEFT Pcb Total Assembly 1
..2 DM-M10 SOLATING TAPE 0.01 -
..2 TWPC19C03301T TOP LEFT PCB SMT/AI Assembly 1 -
...3 PC19C033 TOP LEFT PCB 1 -
...3 TWPC19C033A01T TOP LEFT PCB SMT/AI Assembly 1 -
....4 AA822524X IC SN74HC165PW 4 IC200,201,202,203
....4 AL0-17-8103 RES ARRAY 8X10K 4 RN200,201,202,203
....4 AL2-73-4051 IC74HC4051 Single 8-Chan Mux 16P Soic 2 IC400,401
....4 CS101J5003NPO CCAP SMD 100pF/50V 5% 0603 NPO 12 C401,402,403,404,405,410,412,413,414,41
5,416,419
....4 CS102K5003X7R CCAP SMD 1nF/50V 10% 0603 X7R 4 C110,111,114,115
....4 CS103K5003NPO CCAP SMD 0.01uF/50V 10% 0603 NPO 2 C127,128
....4 CS104K5003X7R CCAP SMD 0.1uF/50V 10% 0603 X7R 24
C102,103,104,105,106,107,109,112,113,11
6,119,124,125,200,201,202,203,204,300,30
1,302,303,400,409
....4 CS105K1603X7R CCAP SMD 1uF/16V 10% 0603 X7R 1 C126
....4 CS180J5003NPO CCAP SMD 18pF/50V 5% 0603 NPO 2 C117,118
....4 CS221J5003NPO CCAP SMD 220pF/50V 5% 0603 NPO 4 C120,121,122,123
....4 CS475K1605X5R CCAP SMD 4.7uF/16V 10% 0805 X5R 3 C100,101,108
....4 DIBAT54 Schottky Barrier Rectiies Diode BAT54 1 D104
....4 DIESD5B5.0S Transient Voltage Suppressor Diode ESD5B 3 D101,400,401
....4 ECS10616BLE ECAP 10UF/16V 4*5.7mm SMD Low ESR 2 EC400,401
....4 ECS10716D
Capacitor Electrolytic 100uF/16V D type SMD
3 EC100,101,102
....4 FCN2T1003003 FCN Dual Touch SMD Pitch=1.0mm 30P 1 FCN100
....4 IC74AHCT541PWR IC 74AHCT541PW 1 IC101
....4 IC74HC2G04GW IC 74HC2G04GW 1 IC102
....4 ICSN74HC595DR IC SN74HC595DR 8-Bit Shit Reg 4 IC300,301,302,303
....4 ICYH109C06 IC STM32F401RCT6 LQFP-64+Progr 1 IC100
.....5 ICSTM32F401RCT6 IC STM32F401RCT6 LQFP-64 1 -
....4 LDKPT-1608SURCK Liquid-emitting Diode Red SMD 27
LD300,301,302,303,304,305,307,308,309,3
10,312,313,314,315,316,317,318,319,320,3
21,322,323,325,326,327,329,330
....4 LDKPT-1608ZGC Liquid-emitting Diode Green SMD 2 LD324,328

....4 LDL-S291SWC-ML5 LED White SMD 0603 120° 2 LD306,311
....4 RS000010J03 RESISTOR 0 5% SMD 0603 37
R100,125,149,150,151,152,153,154,155,15
6,157,158,159,160,161,162,163,400,401,40
2,403,404,405,406,407,408,409,410,411,41
2,413,RR1,2,3,4,5,6
....4 RS001M10F03 RESISTOR 1M 1% SMD 0603 4 R112,113,122,123
....4 RS002210F03 RESISTOR 22 1% SMD 0603 13 R101,102,126,127,128,130,131,133,135,13
6,139,168,169
....4 RS010010F03 RESISTOR 100 1% SMD 0603 31
R305,306,307,308,309,310,311,312,313,31
4,315,316,317,318,319,320,321,322,323,32
4,325,326,327,328,329,330,331,332,333,33
4,335
....4 RS010K10F03 RESISTOR 10K 1% SMD 0603 15 R103,104,105,117,119,120,121,146,147,14
8,166,167,338,341,344
....4 RS22R110F03 RESISTOR 22.1 1% SMD 0603 2 R164,165
....4 RS47R510F03 RESISTOR 47.5 1% SMD 0603 4 R200,201,202,203
....4 RS49R910F03 RESISTOR 49.9 1% SMD 0603 24
R106,107,108,109,110,111,114,115,116,11
8,132,134,137,138,140,141,142,143,144,30
0,301,302,303,304
....4 SWEVQPLHA15 Switch Tact Stem Height:1.5mm 8 SW202,206,208,209,211,212,214,216
....4 TE6A2000501 Pin Header 180° Pitch 2.0mm 5Pin SMD 3 (TE101,409,411)
....4 TE6A2000602 Pin Header 180° Pitch 2.0mm 6P SMD 1 (TE502)
....4 TE6A2000801 Pin Header 180° Pitch 2.0mm 8P SMD 2 (TE201,203)
....4 TRDMN6140L Power MOSFET N-Channel DMN6140L 60V 1.6A 3 Q301,303,305
....4 UHBLM18HD102SN1 Bead 1100 1GHZ 50mA 0603 6 L100,101,102,103,104,105
....4 XTM08000X6F1 Crystal 8MHZ 49US SMD Fundamen 1 X100
...3 TWPC19C033B01T TOP LEFT SENSOR PCB SMT/AI Ass 1 -
....4 AA822748X Diode BAV99 1 D500
....4 AL2-51-4401 Transistor 2N4401 NPN 2 Q500,501
....4 CS104K5003X7R CCAP SMD 0.1uF/50V 10% 0603 X7R 3 C500,501,504
....4 CS680J5003NPO CCAP SMD 68pF/50V 5% 0603 NPO 1 C505
....4 DIEN1N4148WSM HF Diode 1N4148 SOD123 SMD 1 D501
....4 DIENMMBD4148SE Diode Single MMBD4148SE 100V 200mA 1 D503
....4 DIESD5B5.0S Transient Voltage Suppressor Diode ESD5B 1 D502
....4 IC74LVC2G17DBV IC 74LVC2G17DBV 1 U500
....4 ICLM393DR IC OPA LM393DR 1 IC500
....4 RS000010J03 RESISTOR 0 5% SMD 0603 1 R514
....4 RS010K10F03 RESISTOR 10K 1% SMD 0603 4 R500,504,510,511
....4 RS033210F03 RESISTOR 332 1% SMD 0603 2 R503,507
....4 RS12K110F03 RESISTOR 12K1 1% SMD 0603 1 R508
....4 RS1K8210F03 RESISTOR1.82K 1% SMD 0603 2 R501,505
....4 RS22K110F03 RESISTOR 22.1K 1% SMD 0603 2 R502,506
....4 RS49K910F03 RESISTOR 49.9K 1% SMD 0603 1 R509
....4 TE682000602 Pin Header 90° Pitch:2.0mm 6Pin SMD 1 (TE501)
....4 TR2SK1828 Moset N-CH 20V MAIN 2-Pin 1 Q502
....4 UHBLM18AG102SN1 BEAD 1000 100MHZ 2 L500,R513
...3 TWPC19C033C01T TOP LEFT PADDLE1 PCB SMT/AI AS 1 -
....4 TE6A2000801 Pin Header 180° Pitch 2.0mm 8P SMD 1 (TE200)
...3 TWPC19C033D01T TOP LEFT PADDLE2 PCB SMT/AI AS 1 -
....4 TE6A2000801 Pin Header 180° Pitch 2.0mm 8P SMD 1 (TE202)
...3 TWPC19C033E01T TOP LEFT FILTER1 PCB SMT/AI As 1 -
....4 CS101J5003NPO CCAP SMD 100pF/50V 5% 0603 NPO 1 C600
....4 ECS10616BLE ECAP 10UF/16V 4*5.7mm SMD Low 1 EC600
....4 RS000010J03 RESISTOR 0 5% SMD 0603 1 R600
...3 TWPC19C033F01T TOP LEFT CUE PCB SMT/AI Assemb 1 -
....4 CS101J5003NPO CCAP SMD 100pF/50V 5% 0603 NPO 2 C700,701

....4 ECS10616BLE ECAP 10UF/16V 4*5.7mm SMD Low 1 EC700
....4 RS000010J03 RESISTOR 0 5% SMD 0603 2 R700,701
....4 TE6A2000501 Pin Header 180° Pitch 2.0mm 5Pin SMD 1 (TE700)
...3 TWPC19C033G01T TOUCH PCB SMT/AI Assembly 1 -
....4 FCN1T0500802 FCN Top Contact ZIF SMD Pitch0.5mm 8P 1 -
....4 UH160808T-601Y CAPACITOR 6 FCN801
..2 TWPC19C033A01 TOP LEFT PCB DIP Assembly 1 48
...3 SW111FD1B118.5F Switch Rotational Encode 20Pulse 18.5mm 1 ENC100
...3 SWEVQ11L05R Switch Tact 5mm 160g Horizonta DIP 13 SW200,201,203,204,210,219,220,221,222,2
24,225,226,227
...3 TE10200502 5P CONNECTOR 1 (TE103)
...3 TE962542001 Terminal 20P 2.54mm 1 (TE102)
...3 VRR10301605 Potentiometer Rotary Volume:10K2B 16mm 2 VR400,412
...3 VRR10301606 Potentiometer Rotary Volume:10K2B 16mm 6 VR401,402,403,413,414,415
...3 VRS10304525 Potentiometer Slide 10K2B Travel 45mm 2 VR405,411
...3 VRS10304535 Potentiometer Slide 10K Travel 45mm 1 VR416
...3 VRS10304549 Potentiometer Slide Volume10K2B 45mm 1 VR404
..2 TWPC19C033B01 TOP LEFT SENSOR PCB DIP Assemb 1 49
...3 DIFI-206L Optical Sensor Phototra nsistor output 2 SEN500,501
..2 TWPC19C033C01 TOP LEFT PADDLE1 PCB DIP Assem 1 45
...3 SWLBCR23M-095 Switch Toggle Dual Row 3 Pulse 1 SW217
..2 TWPC19C033D01 TOP LEFT PADDLE2 PCB DIP Assem 1 46
...3 SWLBCR23M-095 Switch Toggle Dual Row 3 Pulse 1 SW223
..2 TWPC19C033E01 TOP LEFT FILTER1 PCB DIP Assem 1 50
...3 SWEVQ11L05R Switch Tact 5mm 160g Horizonta DIP 1 SW600
...3 TE622000501 5P CONNECTOR 1 (TE600)
...3 VRR10301606 Potentiometer Rotary Volume:10K2B 16mm 1 VR600
..2 TWPC19C033F01 TOP LEFT CUE PCB DIP Assembly 1 47
...3 VRR10301605 Potentiometer Rotary Volume:10K2B 16mm 2 VR700,701
..2 TWPC19C033G01 TOUCH PCB DIP Assembly 1 51
...3 TE10200601 Connector in Header 180° Pitch:2.00mm 6P DIP 1 (J801)
0.1 TWPC19C03401 TOP RIGHT Pcb Total Assembly 1
..2 DM-M10 SOLATING TAPE 0.01 -
..2 TWPC19C03401T TOP RIGHT PCB SMT/AI Assembly 1 -
...3 PC19C034 TOP RIGHT PCB 1 -
...3 TWPC19C034A01T TOP RIGHT PCB SMT/AI Assembly 1 -
....4 AA822524X IC SN74HC165PW 2 IC700,701
....4 AL0-17-8103 RES ARRAY 8X10K 2 RN700,701
....4 AL2-73-4051 IC 74HC4051 Single 8-Chan 1 IC600
....4 CS101J5003NPO CCAP SMD 100pF/50V 5% 0603 NPO 4 C602,603,604,608
....4 CS104K5003X7R CCAP SMD 0.1uF/50V 10% 0603 X7R 8 C600,601,605,606,607,700,701,708
....4 ECS10716D Capacitor Electrolytic 100uF/16V 2 EC600,601
....4 FCN2T1003003 FCN Dual Touch SMD Pitch=1.0mm 30P 1 FCN600
....4 ICSN74HC595DR IC SN74HC595DR 8-Bit Shit Reg 2 IC601,602
....4 LDKPT-1608SURCK Liquid-emitting Diode Red SMD 13 LD600,601,602,604,605,606,607,608,609,6
10,611,614,615
....4 LDKPT-1608ZGC Liquid-emitting Diode Green SMD 2 LD603,616
....4 RS000010J03 RESISTOR 0 5% SMD 0603 24
R600,602,616,617,618,619,620,621,622,62
3,624,625,626,627,628,629,630,631,646,64
7,RS2,3,4,5
....4 RS010010F03 RESISTOR 100 1% SMD 0603 15 R604,605,606,607,608,609,610,611,612,61
3,614,615,634,635,636

....4 RS010K10F03 RESISTOR 10K 1% SMD 0603 3 R639,642,645
....4 RS47R510F03 RESISTOR 47.5 1% SMD 0603 2 R700,701,
....4 RS49R910F03 RESISTOR 49.9 1% SMD 0603 1 R603
....4 SWEVQPLHA15 Switch Tact Stem Height:1.5mm SMD 4 SW703,707,711,715
....4 TE6A2000602 Pin Header 180° Pitch 2.0mm Single Row 1 (TE601)
....4 TRDMN6140L Power MOSFET N-Channel DMN6140L 60V 1.6A 3 Q601,603,605
...3 TWPC19C034B01T TOP RIGHT SENSOR PCB SMT/AI As 1 -
....4 AA822748X Diode BAV99 1 D701
....4 AL2-51-4401 Transistor 2N4401 NPN 2 Q700,701
....4 CS104K5003X7R CCAP SMD 0.1uF/50V 10% 0603 X7R 3 C702,703,706
....4 CS680J5003NPO CCAP SMD 68pF/50V 5% 0603 NPO 1 C707
....4 DIEN1N4148WSM HF Diode 1N4148 SOD123 SMD 1 D700
....4 DIENMMBD4148SE Diode Single MMBD4148SE 100V 200mA 1 D703
....4 DIESD5B5.0S Transient Voltage Suppressor Diode ESD5B 1 D702
....4 IC74LVC2G17DBV IC74LVC2G17DBV 1 U700
....4 ICLM393DR IC OPA LM393DR 1 IC702
....4 RS000010J03 RESISTOR 0 5% SMD 0603 1 R716
....4 RS010K10F03 RESISTOR 10K 1% SMD 0603 4 R702,706,712,713
....4 RS033210F03 RESISTOR 332 1% SMD 0603 2 R705,709
....4 RS12K110F03 RESISTOR 12K1 1% SMD 0603 1 R710
....4 RS1K8210F03 RESISTOR 1.82K 1% SMD 0603 2 R703,707
....4 RS22K110F03 RESISTOR 22.1K 1% SMD 0603 2 R704,708
....4 RS49K910F03 RESISTOR 49.9K 1% SMD 0603 1 R711
....4 TE6A2000602 Pin Header 180° Pitch 2.0mm Single Row 1 (TE701)
....4 TR2SK1828 MOSFET N-CH 20V MAIN 2-Pin 1 Q702
....4 UHBLM18AG102SN1 BEAD 1000 100MHZ 2 L700,R715
...3 TWPC19C034C01T FRONT PCB SMT/AI Assembly 1 -
....4 CS101J5003NPO CCAP SMD 100pF/50V 5% 0603 NPO 1 C1
....4 CS102J5003NPO CCAP SMD 1nF/50V 5% 0603 NPO 4 C3,8,11,12
....4 CS104K5003X7R CCAP SMD 0.1uF/50V 10% 0603 X7R 5 C2,9,13,14,15
....4 DIESD5B5.0S Transient Voltage Suppressor Diode ESD5B 4 D1,2,3,4
....4 DISMBJ9.0CA DIODE P6SMB11CAT3 BRKDWN TVSC 9.4V 600W 2 Z1,2
....4 ECS10616BLE ECAP 10UF/16V 4*5.7mm SMD Low 4 C4,5,6,7
....4 ICOPA1678IDR IC OPA1678 SOP-8 1 U1
....4 OTM21CC222R1H3 NETWORK EMI Suppression Filters 2200pF 5 2 FIL1,2
....4 RS000010J03 RESISTOR 0 5% SMD 0603 4 R6,8,RS1,6
....4 RS002K10F03 RESISTOR 2K 1% SMD 0603 3 R2,4,7
....4 RS056210F03 RESISTOR 562 1% SMD 0603 2 R3,5
....4 RS47K510F03 RESISTOR 47.5K 1% SMD 0603 1 R9
....4 RS511K10F03 RESISTOR 511K 1% SMD 0603 1 R1
....4 UHBLM18AG102SN1 BEAD 1000 100MHZ 2 FB1,2
....4 VASM1005C080MT AVR-M1005C080MT 5.5V 8V@1mA 0402 3 D5,6,7
..2 TWPC19C034A01 TOP RIGHT PCB DIP Assembly 1 53
...3 SWEVQ11L05R Switch Tact 5mm 160g Horizonta DIP 8 SW700,702,704,706,708,710,712,714
...3 VRR10301605 Potentiometer Rotary Volume:10K2B 16mm 2 VR600,603
...3 VRR10301606 Potentiometer Rotary Volume:10K2B 16mm 1 VR602
...3 VRS10304549 Potentiometer Slide Volume10K2B 45mm 1 VR601
..2 TWPC19C034B01 TOP RIGHT SENSOR PCB DIP Assem 1 52
...3 DIFI-206L Optical Sensor Phototra nsistor output 2 SEN700,701
..2 TWPC19C034C01 FRONT PCB DIP Assembly 1 57
...3 JK6631501070 Bah Base W/NUT 6.3f 1 J1
...3 JKK3J13B-5 3.5fHeadphone jack 5PIN 90° 1 J4
...3 JY6317-02-030 Earphone base W/NUT 1 J2
...3 TE612000901 Connector 9P 180° 1 (J3)
...3 VRR50303007 VR 50KA 1 VR1
0.1 TWPC20C02301 REAR PCB Total Assembly(TI) 1 55
..2 BAWSF-3M-N2W Washer 4 (U10)