Nurseryworks lydian NW12001 User manual

Read all instructions BEFORE assembly and USE of product.
KEEP INSTRUCTIONS FOR FUTURE USE.
REVISED 10 OCTOBER 2014
LYDIAN CRIB
(NW12001)
Instruction Manual

- 02 -
Nursery Works is a purveyor of cutting-edge juvenileproducts.Created
for the ultra-chic, Nursery Works aims to bring high design into the
nursery.Our designers work, whenever possible, in close collaboration
with highly skilled American craftspeopleto build each piece. Our
products are madeinlowproductionruns that allowus to employ
methods and materials that would beunavailableintypical mass pro-
duction. We take prideinpresenting new materials to the children’s
industry that raisethe bar indesign, quality, and functionality for
parents and babies around the world.
THE PRODUCT AND MANUFACTURING PROCESS
With each product Nursery Works strives to explore new materials
and processes, including non-toxic, recyclable, acrylic; CNC-milled
Baltic birch; 24k gold-plated aluminum; and laser-cut, powder
coated stainless steel. In addition, many of oursolid wood cribs are
bench-made in Los Angeles using traditionaljoinery techniques
that cannot be accomplished in mass-production. For othercribs
we employ precise CNC milling that allows us to realize designs
that were previously unimaginable. This combination of the latest
fabrication technology with traditional techniques and our cutting
edge designs is unique to Nursery Works. Low- and no-VOC
finishes are used across allourcribs and our white oak and black
walnut are sourced from sustainably-managed, American forests.
Our products are tested to governmental standards onan annual
basis and are certified by the Juvenile Products Manufacturers
Association (JPMA).
Please note that due to the handcrafted nature of ourproducts
and ouruse of solid woods, each piece is unique and may possess
color variations and irregular wood grain or surface texture. These
natural characteristics are part of the beauty of real wood, are not
considered manufacturing defectsand do not merit replacements.

- 03 -
MAINTENANCE AND CLEANING
To preserve the quality of yourNursery Works furniture we recom-
mend periodically wiping with a damp, lint-free cotton cloth. If a
damp cloth does not clean fingerprints on the gold surface, you
may clean with a 1:1 vinegar to watersolutionora non-toxic glass
cleaner. Dampen a cloth with the solution (do not spray directly
on crib) and wipe the gold surface. Dry with a second, clean cloth.
Avoid getting the wood wet. Avoid furniture polish orcleaning
sprays as they may change the sheen of the wood finish. Wood
expands and contracts with temperature and humidity. Avoid
placing the furniture in direct sunlight or neara heating or air
conditioning vent.
Touch up kits are available upon request by contacting
Nursery Works at: 323 728 8988 or([e-mail]).
IMPORTANTNOTE
Improperassembly can result in damage to your furniture or
cause harm to yourchild. Properassembly is critical to ensure
a safe and comfortable end result. Please read allinstructions
before assembly and keep instructions for future use.
Thank you for purchasing Nursery Works. For any questions or
assistance, please contact us at 323 728 8988, or via email at
[e-mail]. For additionalinformation on ourPurchase
Terms and Conditions, please visit www.nurseryworks.net. Your
authorized Nursery Works retailer willalso be happy to assist you.

- 04 -
W A R N I N G
READ ALL INSTRUCTIONS BEFORE ASSEMBLING CRIB.
KEEP THE MANUAL FOR FUTURE USE.
RE
FUTURE USE
Fa ilu re to follow the s e w a rning s a nd
the as s e m bly ins truc tions c ould re s ult
in s e riou s inju ry o r d e a th.
Please read the caution and
warning statements insert before
using your crib.
TO AVOID DANGEROUS GAPS, ANY MATTRESS USED
IN THIS BED SHALL BE A FULL-SIZE CRIB MATTRESS
AT LEAST 51 5⁄8 IN. (1310 MM) IN LENGTH, 27 1⁄4 IN.
(690 MM) IN WIDTH, AND A MAX THICKNESS OF
6 IN. (150 MM).
WARNING:

- 05 -
Parents should ensure a safe environment for the childby
checking regularly,before placing the childin the product,
that every component is properly and securely in place.
• Infants can suffocate on soft bedding. Neveradd a pillow or
comforter. Neverplace additional padding under an infant.
• To reduce the risk of SIDS, pediatricians recommend healthy
infants be placed on theirbacks to sleep, unless otherwise
advised by yourphysician.
• Strangulation Hazard: Strings can cause strangulation! Do not
place items with a string around a child’s neck, such ashood
strings or pacifier cords. Do not suspend strings overa crib or
attach strings to toys.
• To help prevent strangulation tighten all fasteners. A child can
trap parts of the body orclothing on loose fasteners.
• DO NOT place a crib neara window where cords from blinds
ordrapes may strangle a child.
• FallHazard: When a child is able to pull to a standing position,
set the mattress to the lowest position and remove bumperpads,
large toys and otherobjects that could serve as steps for
climbing out.
• Stop using crib when child begins to climb out or reaches the
height of 35 in. (89cm).
• Check this product for damaged hardware, loose joints, loose
bolts or other fasteners, missing parts or sharp edges before
and afterassembly and frequently during use.Securely tighten
loose bolts and other fasteners. DO NOT use crib if any parts
are missing, damaged orbroken. Contact Nursery Works for
replacement parts and instructionalliterature if needed.
DO NOT substitute parts.
WARNING:

WARNING:
- 06 -
• DO NOT use a watermattress withthis crib.
• For cribs equipped with teething rails, replace teething rail if
damaged, cracked or loose.
• If refinishing, use a non-toxic finish specified for children’s products.
• Neveruse plastic shipping bags or otherplastic films as mattress
covers because they can cause suffocation.
• Infants can suffocate in gaps between crib sides when used with
a mattress that is too small.
• Follow warnings on allproducts in a crib.
Please doNOT remove any wood screws
in the normal disassembly of the crib.

- 07 -
ONE YEAR LIMITED WARRANTY
We willreplace any missing parts at the time of purchase or any
defective item within a one yearperiod from the date of original
purchase. Please keep yourreceipt so that we may process your
warranty request. This warranty only covers new units withoriginal
packaging and ownership, and is not transferable. It doesnot
coverany used, secondhand ordemo models.
This warranty does not coverany damaged or defective parts that
result from installation and assembly, normal wear and tear, abuse,
negligence, improperuse oralteration to the finish, design, and
hardware of the crib. The specific legalrights of this warranty may
varyfrom state to state. Some states do not allow any exclusion
or limitation of incidentaldamages. Some states do not allow
limitation on how long an implied warranty lasts.
Registering yourproduct is even easier than before! You can
register yourproduct on our website at: www.nurseryworks.net.
IF YOU WOULD LIKE TO ORDER REPLACEMENTOR MISSING
PARTS, PLEASE VISITUS AT:
WWW.NURSERYWORKS.NET
OR CONTACT US BY MAIL:
855 Washington Blvd. Montebello, CA 90640
Tel: [phone] | Fax: [phone]

Hardware and Tools List
- 08 -
Hardware & Tools Ref. No Description
LYDIAN CRIB
A x 12 Screw
(50mm/2”)
Screw
(38mm/1.5”)
Hex Wrench
B x 12
C x 8
D x 1
Lock WasherE x 12
Metal Pin

- 09 -
LYDIAN CRIB
Parts List
PartsRef. NoDescription
1 x 1 Crib Front
Crib Back
Crib Side
2 x 1
3 x 2

- 10 -
Parts List
PartsRef. NoDescription
4 x 1 Mattress Board
Mattress Board
Support Block
5 x 4
• Be sure you follow the instructions in the orderthat they appear.
• To avoid possible scratching, assemble furniture on a soft
surface (like a carpet orblanket).
• Be aware that you can use both ends of the Hex wrench.
(For instance, use it lengthwise to get into tighter corners.)
• Be carefulnot to overtighten screws.
LYDIAN CRIB

Determine if you want the mattress board at the highest level ,
the second high level, the third high level , or the lowest
level. Make sure the Mattress Board is level.
- 11 -
Assembly Instructions
Step 1
You willneed two people to assemble this crib
Highest Position
2nd High Position
3rd High Position
Lowest Position
LYDIAN CRIB

Identify the Crib Front . Lay Crib Front down on a blanket.
Attach two Mattress Board Support Blocks to the Crib Front
by using two screws Beach. Tighten screws with Hex wrench D.
Put Crib Front aside. Be careful to not scratch the gold
surface.
Tighten all screws securely before proceeding to the next step.
- 12 -
Step 2
1
1
1
5

Identify the Crib Back . Lay Crib Back down on a blanket.
Attach two Mattress Board Support Blocks to the Crib Back
by using two screws Beach. Tighten screws with Hex wrench D.
Tighten all screws securely before proceeding to the next step.
- 13 -
Step 3
5
2 2
2

and three
Identify two Crib Sides . Attach two Crib Sides to the Crib
Back by using two metal pinssC, three screws A
Tighten screws with Hex wrench D.
Tighten all screws securely before proceeding to the next step.
- 14 -
Step 4
C
E
Eeach.lock washers

Rotate the crib to standing position.
- 15 -
Step 5

Attach Crib Front to the Right and Left Crib Side using two
metal pins C,three screws and lock washers
Tighten screws with Hex Wrench
Afor each side.
D.
Tighten all screws securely before proceeding to the next step.
- 16 -
Step 6
C
E
E

- 17 -
Step 7
Identify the Mattress Board . Attach Mattress Board onto
four Mattress Board Support Blocks with four screws B. Tight-
en screws with Hex wrench D.
Tighten all screws securely before proceeding to the next step.

Drop in Crib Mattress (sold separately).
Assembly is complete.
- 18 -
Step 8

- 19 -
LYDIAN TODDLER BED
Conversion Assembly Instructions
Step 1
Lift up
1
Unscrew two screws at the bottom of Crib Front . Lift the
panel up as illustrated.
1

- 20 -
Step 2
B
Unscrew four screws Band remove the Mattress Board .