Nurseryworks SLEEPYTIME ROCKER 1085 User manual

SLEEPYTIME ROCKER (1085)
Instrucon Manual
revised 27NOV2014
Congratulations!
You are now the owner of a Nursery Works
product...a line of modern baby furniture that
redefines the nursery. Nursery Works’ products
are designed with both style and functionality
in mind, and we hope it becomes a source of
pleasure for you and your family. Quality material,
workmanship and pride have gone into these
products. Proper assembly is important to
ensure a safe and comfortable end result for
your baby. Please read all instructions before
assembly, and keep instructions for future use.

1
The Product and Manufacturing Process:
Nursery Works products are madefrom sustainable
woods wherever possible and also from
high-quality wood veneers. The primary materi-
al used in our products is Paulownia wood
which is harvested from plantations and
renewed every 10-12 years. Zero-grade MDF,
containing well below the regulated limit of
formaldehyde, is used sparingly in components
of our products to achieve our signature
carvings and single board slat cutouts. All
paints, finishes and glues are low-VOC. Our
products are tested on a frequent basis to
ensure that all coatings and finishes comply
with U.S. and Canadian metals requirements.
Each Nursery Works product is a unique piece
crafted largely by hand. We use a specialized
machinery process to create our hallmark
carvings and each piece is constructed and
lacquered by hand. Our lacquering process
involves over a dozen steps to sand and
polish the furniture to achieve our glossy
finish. With proper care and assembly, your
Nursery Works products will be a part of your
family for years to come. Please note that
due to the handcrafted nature of our products
and our use of solid woods, each piece is
unique and may contain irregular qualities,
such as natural markings, miniscule burrs, or
slight discolorations.These natural characteristics
are inherent in wood, are not considered
manufacturing defects and do not merit
replacements.

Maintenance and Cleaning:
To preserve the hand-crafted quality of
Nursery Works furniture, we recommend
using a cotton cloth and a non-toxic cleaner.
Periodic polishing or oiling on wood stains will
help to maintain the rich wood tones. For our
upholstered products, we recommend using
water to clean suede products and light
foam cleaner for all other fabrics.
If your child is teething, some furniture’s finish
may be affected. Be assured that our
low-VOC lacquers, finishes and glues comply
with applicable regulations and standards.
Touch up kits and replacement parts are
available for purchase upon request by con-
tacting Nursery Works at:
323. 728. 8988 or [email protected].
2

3
Important Note:
Improper assembly can result in damage to
your furniture or cause harm to your child.
Proper assembly is critical to ensure a safe
and comfortable end result. Please read all
instructions before assembly and keep
instructions for future use.
Thank you for purchasing Nursery Works. For
any questions or assistance, please contact
us at 323. 728. 8988, or via email at
[e-mail] additional information
on our Purchase Terms and Conditions, please
visit www.nurseryworks.net. Your authorized
Nursery Works retailer will also be happy to
assist you.

WARNING
!
4
• Failure to follow these warnings and the
assembly instructions could result in serious
injury or death.
• Read all instructions before assembling this
product.
• Keep instructions for future use.
• FALL HAZARD – To prevent death or serious
injury, always keep child within arm’s reach.
• Check this product for damaged hardware,
loose joints, missing parts or sharp edges before
and after assembly and frequently during use.
DO NOT use this product if any parts are missing,
damaged or broken. Contact The MDB Family
for replacement parts and instructional litera-
ture if needed. DO NOT substitute parts.
• Assembly tool required: Phillips screwdriver
(not included).
• Tighten all screws securely at each step of
the instructions. Check frequently to be certain
they remain tight and secure.
• If refinishing, use a non-toxic finish specified
for children’s products.
• This product contains small parts. Keep small
parts out of children’s reach during assembly.
• Properly discard all packaging materials
after assembly is complete.
• Maximum weight capacity: 308 pounds

ONE YEAR LIMITED WARRANTY:
IF YOU WOULD LIKE TO ORDER REPLACEMENT
OR MISSING PARTS. PLEASE VISIT US AT:
WWW.NURSERYWORKS.NET
OR YOU CAN CONTACT US BY MAIL:
855 Washington Blvd. Montebello, CA 90640
Tel: [phone]
Fax: [phone]
Registering your product is even easier than
before. You can register your product on our
website at : www.nurseryworks.net
We will replace any missing parts at the time
of purchase or any defective item within a
one year period from the date of original purchase.
Please keep your receipt so that we may process
your warranty request. This warranty only
covers new units with original packaging and
ownership, and is not transferable. It does not
cover any used, secondhand or demo
models.
This warranty does not cover any damaged
or defective parts that result from installation
and assembly, normal wear and tear, abuse,
negligence, improper use or alteration to the
finish, design, and hardware of the rocker. The
specific legal rights of this warranty may vary
from state to state. Some states do not allow
any exclusion or limitation of incidental damages.
Some states do not allow limitation on how
long an implied warranty lasts.
5

SLEEPYTIME ROCKER
Hardware and Tools List
A x 4
B x 8
C x 4
D x 4
E x 8
F x 4
G x 4
H x 1
Screw
(70mm/2.75”)
Screw
(60mm/2.4”)
Dowel
(40mm/1.6”)
Washer
Spring Washer
Cam Lock
Cam Bolt
Allen Wrench
Please note that screw E, cam lock F and cam bolt G requires
a Phillips Head Screw driver which is not provided.
6
Ref. No DescriptionHardware & Tools

front back
Be sure you follow the instructions in the order that they appear.
To avoid possible scratching, assemble furniture on a soft surface.
For instance on a carpet or blanket.
Be aware that you can use both ends of the Allen wrench.
For instance, use it lengthwise to get into tighter corners.
Be careful not to over tighten screws.
Rear Leg
Cross Bar
Front Leg
Cross Bar
Leg
Chair
x1
x2
x1
x1
7
Parts List
Ref. No DescriptionParts
SLEEPYTIME ROCKER

Rocker legs are stored
under the seat cushion.
8

Sleepytime Rocker
Assembly Instructions
Step 1
Insert four Dowels Binto the pre-drilled holes of the
Front Leg Cross Bar and the Rear Leg Cross Bar .
Total of 8 Dowels.
9

Insert the Cam Bolt G into the middle holes of the
leg .
Repeat the same procedure for the other leg.
Step 2
10
front back

Step 3
Connect the Front Leg Cross Bar and Rear Leg Cross
Bar with the 2 legs by inserting the dowels of the
cross bars into the pre-drilled holes of the 2 legs.
11

Step 4
Insert Cam Locks F into the pre-drilled holes as
indicated. Then use a screw driver and turn the
Cam Locks F 90 degrees clock wise.
12

Step 5
Put the Spring Washer D into Screw A and then
followed by Washer C. Repeat the same procedures
for all 4 Screws A.
13

Step 6
Connect the Legs to the wooden frame of the
rocker by inserting Screws A into the pre-inserted nuts
of the wooden frame and screw them tightly using
the Allen Wrench H. Repeat the same procedures for
4 corners. Then insert 2 Screws E into the pre-drilled
holes of the leg and screw it into the wooden frame
tightly using a screw driver.
14

Step 7
Assembly is complete.
15

FAUTEUIL BERÇANT SLEEPYTIME (1085)
Manuel d’ulisaon
Félicitations!
Vous êtes désormais le propriétaire d’un produit
Nursery Works... Une ligne de mobilier moderne
qui donne un sens nouveau aux meubles de
bébés. Les produits Nursery Works sont conçus
avec style et dans un but fonctionnel. Nous
espérons qu’ils seront une source de satisfaction
pour vous et votre famille. Nous avons utilisé
des matériaux de qualité et tout notre savoir-faire
pour fabriquer avec fierté ces produits. Un
assemblage adéquat est essentiel afin d’as-
surer un résultat à la fois sûr et confortable
pour votre bébé. Veuillez lire toutes les instructions
avant l’assemblage et conserver ce manuel
pour une utilisation ultérieure.

17
Le produit et sa fabrication :
Les produits Nursery Works sont faits autant que possible
d’essences de bois renouvelables et de placages
de bois de qualité supérieure. La matière première
utilisée dans nos produits est le paulownia, récolté
dans des plantations assurant son renouvellement
tous les 10 à 12 ans. Du MDF contenant un taux de
formaldéhyde largement inférieur à la limite
réglementaire est utilisé, quoique le moins possible,
dans certains éléments de nos produits afin de les
modeler, de les sculpter et de les découper dans le
style particulier qui nous est propre. Toutes nos
peintures et nos colles sont à faible teneur en composés
organiques volatils (COV). Nos produits sont testés
sur une base régulière afin d’assurer que tous les
revêtements et enduits sont conformes aux
normes américaines et canadiennes sur les
métaux.
Chaque produit Nursery Works est une pièce
unique confectionnée en grande partie à la
main. Nous utilisons un procédé mécanique
de pointe dans la création de nos décors de
qualité et chaque pièce est construite et
vernie à la main. Notre procédé de vernissage
comprend une douzaine d’étapes de ponçage
et de polissage du bois pour aboutir au lustre
de notre finition. Un soin et un assemblage
appropriés feront des produits Nursery Works
un membre de votre famille pour les années
à venir. Veuillez noter qu’en raison de la
nature artisanale de nos produits et de l’utili-
sation de bois massif, chaque pièce est
unique et peut contenir des irrégularités telles
que des marquages naturels, de minuscules
bavures ou de légères altérations de
couleurs. Ces caractéristiques sont inhérentes
au bois, elles ne doivent pas être considérées
comme des défauts de fabrication et ne
constituent pas un motif de remplacement.

18
Entretien et nettoyage :
Pour préserver la qualité artisanale des meubles
Nursery Works, nous recommandons l’utilisation
d’un chiffon de coton et d’un nettoyant
non-toxique. Un polissage ou un huilage
périodique du bois teint contribuera à
maintenir la richesse de ses coloris. Pour nos
produits rembourrés, nous recommandons
d’utiliser de l’eau pour nettoyer les surfaces
de suède et un nettoyant peu moussant pour
les tissus.
Si votre enfant fait ses dents, le fini du meuble
pourrait être abîmé à certains endroits. Soyez
assuré que nos laques, finis et colles sont à
faible teneur en COV et sont conformes aux
règlements et aux normes en vigueur. Des
trousses de retouches sont disponibles sur
demande en contactant Nursery Works au :
323. 728. 8988 ou [email protected].

19
Remarque importante :
Un assemblage inapproprié pourrait endommager
votre produit ou causer du tort à votre enfant.
Par conséquent, un assemblage adéquat est
essentiel pour assurer un résultat sécuritaire et
confortable. Veuillez lire toutes les instructions
avant l’assemblage et conserver ce manuel
pour utilisation ultérieure.
Merci de votre achat d’un produit Nursery Works.
Pour toute question ou conseil, veuillez nous
contacter au 323.728.8988 ou par courriel à
i[email protected]. Pour des rensei-
gne-ments additionnels sur nos modalités et
conditions d’achat, rendez-vous sur le site
www.nurseryworks.net. Votre détaillant autor-
isé Nursery Works sera également heureux de
vous aider.