Nurseryworks Vetro Crib User manual

VETRO CRIB
Read all instructions BEFORE assembly and USE of product.
KEEP INSTRUCTIONS FOR FUTURE USE.
REVISED 03 OCT 2018
Instruction Manual
S1000
Vetro crib is protected by U.S. Patent number US D634,133 S
with others U.S. and worldwide Patents Pending.

- 02 -
Nursery Works is a purveyor of cutting-edge juvenile products. Created
for the ultra-chic, Nursery Works aims to bring high design into the
nursery. Our designers work, whenever possible, in close collaboration
with highly skilled American craftspeople to build each piece. Our
products are made in low production runs that allow us to employ
methods and materials that would be unavailable in typical mass
production. We take pride in presenting new materials to the children’s
industry that raise the bar in design, quality, and functionality for
parents and babies around the world.
THE PRODUCT AND MANUFACTURING PROCESS
With each product, Nursery Works strives to explore new materials
and processes, including non-toxic, recyclable acrylic, CNC-milled
maple, 24K gold-plated aluminum, custom marble/granite and
powder-coated stainless steel. In addition, many of our solid wood
cribs are bench-made in small local shops in the United States
using traditional joinery techniques that cannot be accomplished in
mass production. For other cribs, we employ precise CNC milling
that allows us to realize designs that were previously unimaginable.
This combination of the latest fabrication technology with traditional
techniques and our cutting-edge designs is unique to Nursery
Works. Low- and no-VOC finishes are used across all our products
and our products are tested to governmental standards on an
annual basis.
Please note that due to the handcrafted nature of our products and
our use of solid woods, each piece is unique and may possess color
variations and irregular wood grain or surface texture. These natural
characteristics are part of the beauty of real wood, are not consid-
ered manufacturing defects and do not merit replacements.

- 03 -
IMPORTANT NOTE
Improperassembly can result in damage to your furniture or
cause harm to yourchild. Properassembly is critical to ensure
a safe and comfortable end result. Please read allinstructions
before assembly and keep instructions for future use.
Thank you for purchasing Nursery Works. For any questions or
assistance, please contact us at 323 728 8988, or via email at
[e-mail]. For additionalinformation on ourPurchase
Terms and Conditions, please visit www.nurseryworks.net. Your
authorized Nursery Works retailer willalso be happy to assist you.
MAINTENANCE AND CLEANING:
To preserve the quality of your Nursery Works furniture we
recommend periodically wiping with a damp, lint-free cotton cloth
and a non-toxic cleaner. Never use window cleaner, ammonia
products or other chemical sprays on acrylic. Distinctive acrylic
furniture and accessories can last an eternity with minimal care
and maintenance. Acrylic care consists of no more than normal
wipe-cleaning, but care should be taken to avoid scratches.
Acrylic is also stable when exposed to sunlight.
Below are additional guidelines for caring and maintaining our
lucite furniture.

Use only a very soft damp cloth when cleaning acrylic surfaces.
It is possible to scratch acrylic, so NEVER use any scouring
compounds or chemical cleaners such as Windex or other glass
cleaners (even if they are environmentally friendly, organic or
non-scented). Should anything ever stick to an acrylic surface
(such as an adhesive label or gummy substance), do not use any
type of solvent.
Never use the same cloth that you clean other household items
with. These cloths can retain dirt, grit, and chemical residues that
may harm the acrylic. We recommend using a new or
separate cloth for your acrylic care.
In case of scratches, do not worry. Unlike other materials,
scratches on acrylic can be easily removed with specialty
cleaning products, such as Novus (http://www.novuspolish.com).
Keep your acrylic surfaces free from dust and dirt, with “Novus 1”.
It’s a clear, anti-static formula specially created to easily remove
the negative charge that can attract dust and dirt to the surface of
acrylic. Or use “Novus 2” anti-static formula to remove surface
scratches while it cleans. “Novus 3” is for removable of heavier
scratches and requires Novus 2 for final finishing.
- 04 -

- 05 -
WARNING
READ ALL INSTRUCTIONS BEFORE ASSEMBLING CRIB.
KEEP THE MANUAL FOR FUTURE USE.
Failure to follow these warnings and
the assembly instructions could result
in serious injury or death.
Please read the caution and
warning statements insert before
using your crib.
TO AVOID DANGEROUS GAPS, ANY MATTRESS USED
IN THIS BED SHALL BE A FULL-SIZE CRIB MATTRESS
AT LEAST 51 5⁄8 IN. (1310 MM) IN LENGTH, 27 1⁄4 IN.
(690 MM) IN WIDTH, AND A MAX THICKNESS OF
6 IN. (150 MM).
WARNING

- 06 -
Parents should ensure a safe environment for the child by
checking regularly, before placing the child in the product,
that every component is properly and securely in place.
• Do not use this crib if you cannot exactly follow the
accompanying instructions.
• Infants can suffocate on soft bedding. Never add a pillow or
comforter. Never place additional padding under an infant.
• To reduce the risk of SIDS, pediatricians recommend healthy
infants be placed on their backs to sleep, unless otherwise
advised by your physician.
• Strangulation Hazard: Strings can cause strangulation! Do not
place items with a string around a child’s neck, such as hood
strings or pacifier cords. Do not suspend strings over a crib or
attach strings to toys.
• To help prevent strangulation tighten all fasteners. A child can
trap parts of the body or clothing on loose fasteners.
• DO NOT place a crib near a window where cords from blinds
or drapes may strangle a child.
• Fall Hazard: When a child is able to pull to a standing position,
set the mattress to the lowest position and remove bumper pads,
large toys and other objects that could serve as steps for
climbing out.
• Do not use this crib if the child is able to climb out unaided or is
taller than 35 in. (89cm).
WARNING

- 07 -
• Check this product for damaged hardware, loose joints, loose
bolts or other fasteners, missing parts or sharp edges before
and after assembly and frequently during use. Securely tighten
loose bolts and other fasteners. DO NOT use crib if any parts
are missing, damaged or broken. Contact Nursery Works for
replacement parts and instructional literature if needed.
DO NOT substitute parts.
• DO NOT use a water mattress with this crib.
• For cribs equipped with teething rails, replace teething rail if
damaged, cracked or loose.
• If refinishing, use a non-toxic finish specified for children’s products.
• Never use plastic shipping bags or other plastic films as mattress
covers because they can cause suffocation.
• Infants can suffocate in gaps between crib sides when used with
a mattress that is too small.
• Follow warnings on all products in a crib.
• Ensure that the sides are properly latched or locked in place
when the crib is occupied.
• The mattress used with this crib should not be more than 15cm
thick and should be of such length with width that the gap
between the mattress and the sides of the crib is no more than
3cm when the mattress is pushed into the corner of the crib.
Please do NOT remove any wood screws
in the normal disassembly of the crib.
WARNING

- 08 -
Registering your product is even easier than before! You can
register your product on our website at: www.nurseryworks.net.
IF YOU WOULD LIKE TO ORDER REPLACEMENT OR MISSING
PARTS, PLEASE VISIT US AT:
WWW.NURSERYWORKS.NET/PARTS
OR CONTACT US BY MAIL:
8700 Rex Rd. Pico Rivera, CA 90660
Tel: [phone]
ONE YEAR LIMITED WARRANTY
We will replace any missing parts at the time of purchase or any
defective item within a one year period from the date of original
purchase. Please keep your receipt so that we may process your
warranty request. This warranty only covers new units with original
packaging and ownership, and is not transferable. It does not
cover any used, secondhand or demo models.
This warranty does not cover any damaged or defective parts that
result from installation and assembly, normal wear and tear, abuse,
negligence, improper use or alteration to the finish, design, and
hardware of the crib. The specific legal rights of this warranty may
vary from state to state. Some states do not allow any exclusion
or limitation of incidental damages. Some states do not allow
limitation on how long an implied warranty lasts.

VETRO CRIB
Hardware and Tools List
- 09 -
• Be sure you follow the instructions in the order that they appear.
• To avoid possible scratching, assemble furniture on a soft
surface (like a carpet or blanket).
• Be aware that you can use both ends of the Allen wrench.
(For instance, use it lengthwise to get into tighter corners.)
• Be careful not to over tighten screws.
Hardware & Tools Ref. No Description
(2.1 cm/0.83”)
Bolt
(4.0 cm/1.57”)
Bolt with
Cap
Allen wrench
A x 16
C x 8
D x 1
(5.5 cm/2.17”)
Bolt with
Cap
B x 8

Parts List
Parts Ref. No Description
VETRO CRIB
Headboard
- 10 -
1 x 2
2 x 2
3 x 1
Side Rail
Mattress
Support Board

- 11 -
Parts List
Parts Ref. No Description
VETRO CRIB
Left Side
Support Block
Right Side
Support Block
Right Side
Support Block
Left Side
Support Block
7 x 1
6 x 1
5 x 1
4 x 1

- 12 -
Assembly Instructions
VETRO CRIB
Step 1
You will need two people to assemble this crib.
Attach two Right Side Support Blocks and and two Left Side
Support Blocks and to Headboards by using Bolt Bwith Cap.
Tighten all bolts with Allen wrench D.
* Match the numbered labels on Support Blocks and Headboards.
* Make sure all arrows are pointing up .
4 5
67 1
* Repeat on other side.
5
5
1B
4
B
5
Highest Position
Middle Position
Lowest Position

- 13 -
3
Step 2
7
65
7
5
6
Place the Mattress Support Board into the crib. Match the
number labels on the Mattress Support Board and Support
Blocks.
*Start at the highest position and adjust accordingly. As child
grows, it is important to lower the Mattress Support.
3
11

- 14 -
Step 3
7
5
6
6
4
C
311
Firmly attach the Mattress Support Board by inserting two
Bolts Cwith Caps at four corner holes.
Tighten all bolts with Allen wrench D.
3

- 15 -
Step 4
1 1
2
2
3
Rotate
A
Assemble SideRails and Headboards by using Bolt A.
2 1

- 16 -
Step 5
Assembly is complete.

WWW.NURSERYWORKS.NET

Lire toutes les instructions AVANT l’assemblage et l’UTILISATION du produit.
CONSERVEZ CES INSTRUCTIONS POUR UN USAGE ULTÉRIEUR.
LIT DE BÉBÉ
VETRO
Manuel d'instruction
RÉVISÉ LE 03 OCT 2018
S1000
Le lit de bébé Vetro est protégé par le numéro de brevet
américain US D634, 133 S et d’autres brevets en instance aux
É.-U. et à l’échelle mondiale

- 20 -
Nursery Works est un fournisseur de produits pour enfants à la fine pointe
de l'art. Consacrée au chic du chic, Nursery Works vise à apporter tous les
ranements du design dans le mobilier pour enfants. Nos concepteurs
travaillent le plus possible en étroite collaboration avec les artisans
américains les plus habiles pour fabriquer chaque élément. Nos produits
sont faits par petits lots pour nous permettre d'employer des méthodes et des
matériaux dont la production de masse nous priverait. Nous sommes fiers de
présenter de nouveaux matériaux dans le secteur des produits pour enfants
qui relèvent la barre en matière de style, de qualité et de fonctionnalité pour
les parents et les bébés partout au monde.
LE PRODUIT ET SA FABRICATION
Avec chacun de ses produits, Nursery Works s'efforce d'explorer de
nouveaux matériaux et de nouveaux procédés, dont de l'acrylique non
toxique recyclable, de l'érable usiné par une machine-outil commandée
par ordinateur, de l'aluminium plaqué or 24K, du marbre/granit
personnalisé et de l'acier inoxydable à revêtement en poudre. De plus,
bon nombre de nos lits de bébé en bois massif sont fabriqués dans des
petits ateliers aux États-Unis à l'aide de techniques de menuiserie
traditionnelles qui ne peuvent pas être employées dans une production
de masse. Pour d'autres lits de bébé, nous recourons à des
machines-outils numériques de haute précision qui nous permettent de
réaliser des designs qui seraient autrement inimaginables. Cette
combinaison des dernières technologies de fabrication et des
techniques traditionnelles alliées à nos styles dernier cri est unique à
Nursery Works. Nous utilisons des finis à faible teneur en COV ou
sans COV dans toute notre gamme de produits et ceux-ci sont testés
chaque année selon les normes gouvernementales.
Puisque nos produits sont fabriqués à la main en bois massif, chaque
pièce est unique et peut présenter des variations de couleur et une
texture ou un grain de bois irréguliers. Ces caractéristiques naturelles
font partie de la beauté du bois véritable. Elles ne sont pas considérées
comme des défauts de fabrication et ne peuvent justifier un
remplacement.