Nurseryworks GRADIENT User manual

GRADIENT CRIB
Read all instructions BEFORE assembly and USE of product.
KEEP INSTRUCTIONS FOR FUTURE USE.
REVISED 26 FEBRUARY 2019
NW14001
Instruction Manual

- 02 -
Nursery Works is a purveyor of cutting-edge juvenile products. Created
for the ultra-chic, Nursery Works aims to bring high design into the
nursery. Our designers work, whenever possible, in close collaboration
with highly skilled American craftspeople to build each piece. Our
products are made in low production runs that allow us to employ
methods and materials that would be unavailable in typical mass
production. We take pride in presenting new materials to the children’s
industry that raise the bar in design, quality, and functionality for
parents and babies around the world.
THE PRODUCT AND MANUFACTURING PROCESS
With each product, Nursery Works strives to explore new materials
and processes, including non-toxic, recyclable acrylic, CNC-milled
maple, 24K gold-plated aluminum, custom marble/granite and
powder-coated stainless steel. In addition, many of our solid wood
cribs are bench-made in small local shops in the United States
using traditional joinery techniques that cannot be accomplished in
mass production. For other cribs, we employ precise CNC milling
that allows us to realize designs that were previously unimaginable.
This combination of the latest fabrication technology with traditional
techniques and our cutting-edge designs is unique to Nursery
Works. Low- and no-VOC finishes are used across all our products
and our products are tested to governmental standards on an
annual basis.
Please note that due to the handcrafted nature of our products and
our use of solid woods, each piece is unique and may possess color
variations and irregular wood grain or surface texture. These natural
characteristics are part of the beauty of real wood, are not consid-
ered manufacturing defects and do not merit replacements.

MAINTENANCE AND CLEANING
To preserve the quality of yourNursery Works furniture we recom-
mend periodically wiping with a damp, lint-free cotton cloth. Avoid
getting the wood wet. Avoid furniture polish or cleaning sprays as
they may change the sheen of the wood finish. Wood expands and
contracts with temperature and humidity. Avoid placing the
furniture in direct sunlight or near a heating or air conditioning vent.
Touch up kits are available upon request by contacting
Nursery Works at: 323-688-3678 or([e-mail]).
- 03 -
IMPORTANT NOTE
Improperassembly can result in damage to your furniture or
cause harm to yourchild. Properassembly is critical to ensure
a safe and comfortable end result. Please read allinstructions
before assembly and keep instructions for future use.
Thank you for purchasing Nursery Works. For any questions or
assistance, please contact us at 323-688-3678, or via email at
[e-mail]. For additionalinformation on ourPurchase
Terms and Conditions, please visit www.nurseryworks.net. Your
authorized Nursery Works retailer willalso be happy to assist you.

- 04 -
Failure to follow these warnings and
the assembly instructions could result
in serious injury or death.
Please read the Caution
and Warning Statements
insert before using your crib.
READ ALL INSTRUCTIONS BEFORE ASSEMBLING
CRIB. KEEP THE MANUAL FOR FUTURE USE.
●In gaps between a mattress too small or
too thick and product sides
●On soft bedding
NEVER add a mattress, pillow, comforter,
or padding.
INFANTS CAN SUFFOCATE
WARNING
WARNING
WARNING

- 05 -
Parents should ensure a safe environment for the child by
checking regularly, before placing the child in the product,
that every component is properly and securely in place.
●The product, including side rails, must be fully erected prior to
use.
●Strings can cause strangulation! Never place items with a string
around a child’s neck such as hood strings or pacifier cords.
Never suspend strings over product or attach strings to toys.
●Discontinue use of the product when child is able to climb out
or reaches the height of 35in. (90cm).
●Child can become entrapped and die when improvised netting
or covers are placed on top of a product. Never add such items
to confine child in product.
●When child is able to pull to standing position, set mattress/
base to lowest adjustment position and remove bumper pads,
large toys, and other objects that could serve as steps for
climbing out.
●Never place product near a window where cords from blinds or
drapes can strangle a child.
● Use ONLY mattress/pad provided by manufacturer (which must
be at least 53 in. long by 25 in. wide and not more than 5 in. thick).
● Check proper fit of mattress. Should be not more than 5 inches
thick. The maximum gap between mattress and inside of crib
border (or edge) should be no more than 1 inch.
●Always provide the supervision necessary for the continued
safety of your child. When used for playing, never leave child
unattended.
●To reduce the risk of SIDS, pediatricians recommend healthy
infants be placed on their back to sleep, unless otherwise
advised by your physician.
WARNING

- 06 -
●Never use this product if there are any loose or missing
fasteners, loose joints, broken parts, or torn mesh/fabric. Check
before assembly and periodically during use. Contact Nursery
Works for replacement parts and instructional literature if needed.
DO NOT substitute parts.
● Never use plastic shipping bags or other plastic film as mattress
covers not sold and intended for that purpose. They can cause
suffocation.
●Never use a water mattress with this product.
● If refinishing, use a nontoxic finish specified for children’s
products.
Please do NOT remove any wood screws
in the normal disassembly of the crib.
CAUTION:
Use ONLY mattress/pad provided by manufacturer
(which must be at least 53 in. long by 25 in. wide
and not more than 5 in. thick).
WARNING

- 07 -
Registering your product is even easier than before! You can
register your product on our website at: www.nurseryworks.net.
IF YOU WOULD LIKE TO ORDER REPLACEMENT OR MISSING
PARTS, PLEASE VISIT US AT:
WWW.NURSERYWORKS.NET/PARTS
OR CONTACT US BY MAIL:
8700 Rex Rd. Pico Rivera, CA 90660
Tel: [phone]
ONE YEAR LIMITED WARRANTY
We will replace any missing parts at the time of purchase or any
defective item within a one year period from the date of original
purchase. Please keep your receipt so that we may process your
warranty request. This warranty only covers new units with original
packaging and ownership, and is not transferable. It does not
cover any used, secondhand or demo models.
This warranty does not cover any damaged or defective parts that
result from installation and assembly, normal wear and tear, abuse,
negligence, improper use or alteration to the finish, design, and
hardware of the crib. The specific legal rights of this warranty may
vary from state to state. Some states do not allow any exclusion
or limitation of incidental damages. Some states do not allow
limitation on how long an implied warranty lasts.

GRADIENT CRIB
Hardware and Tools List
- 08 -
Hardware & Tools Ref. No Description
Hex Screw
(3 cm/1.18”)
(pre-assembled)
A x 4
Hex Screw
(1.2 cm/0.47”)
(pre-assembled)
B x 12
• Be sure you follow the instructions in the order that they appear.
• To avoid possible scratching, assemble furniture on a soft
surface (like a carpet or blanket).
• Be aware that you can use both ends of the Hex wrench.
(For instance, use it lengthwise to get into tighter corners.)
• Be careful not to over tighten screws.
• Hex screwdriver required for assembly (not included).
Metal Dowel
(pre-assembled)
C x 8
Barrel Nut
with Grub Screw
(pre-assembled)
E x 8
Barrel Nut
(pre-assembled)
D x 8

Hex Wrench
(0.16”)
Hex Wrench
(0.12”)
Hex Wrench
(0.1”)
Bracket
(pre-assembled)
- 09 -
GRADIENT CRIB
Hardware and Tools List
Hardware & Tools Ref. No Description
G x 1
H x 1
I x 1
F x 4

- 10 -
Parts List
Parts Ref. No Description
GRADIENT CRIB
Crib End
(pre-assembled)
1 x 2
Crib Panel
(pre-assembled)
2 x 2
Mini Crib
Mattress
Support
3 x 1

- 11 -
Parts List
Parts Ref. No Description
GRADIENT CRIB
Crib Mattress
6 x 1
Mini Crib Pad
7 x 1
Crib Mattress
Support
(pre-assembled)
Mattress
Support Rail
(pre-assembled)
5 x 2
4 x 1

Assembly Instructions
GRADIENT CRIB
You will need two people to assemble this crib.
- 12 -
Assembly is complete.
6

- 13 -
Move Crib Mattress Support Down
GRADIENT CRIB
Step 1
You will need two people to assemble this crib.
* Make sure the
mattress support
is leveled and
installed properly,
with THE FLAT
SIDE UP.
G
4
5
A
X4

- 14 -
Step 2
2
2
5
5
X4
2
5
I
B
B
BB
F

- 15 -
Step 3
2
2
5
5
X4
5
I
BB
2
B
F
B

- 16 -
Step 4
5
5
A
4
G
X4

- 17 -
Step 5
Assembly is complete.
6

- 18 -
GRADIENT MINI CRIB
Assembly Instructions
Step 1
You will need two people to assemble this mini crib
5
5
4
1
2
21

- 19 -
1
2
2
1
X8
1
2
D
E
H
C
Step 2

- 20-
Step 3
1
1
X4
DE
H
C
1
1
* The bassinet will be
assembled upside-down.