Nurseryworks SINGLE BOOKCASE User manual

SINGLE BOOKCASE
Instrucon Manual
You are now the owner of a Nurseryworks
product...a line of modern baby furniture that
redefines the nursery. Nurseryworks’ products
are designed with both style and functionality
in mind, and we hope it becomes a source of
pleasure for you and your family. Quality ma-
terial, workmanship and pride have gone into
these products. Proper assembly is important
to ensure a safe and comfortable end result
for your baby. Please read all instructions
before assembly, and keep instructions for
future use.
Congratulations!

1
The Product and Manufacturing Process:
Nurseryworks products are made from sus-
tainable woods wherever possible and also
from high-quality wood veneers. The primary
material used in our products is Paulownia
wood which is harvested from plantations
and renewed every 10-12 years. Zero-grade
MDF, containing well below the regulated
limit of formaldehyde, is used sparingly in
components of our products to achieve our
signature carvings and single board slat cut-
outs. All paints, finishes and glues are low-
VOC. Our products are tested on a frequent
basis to ensure that all coatings and finishes
comply with U.S. and Canadian metals
requirements.
Each Nurseryworks product is a unique piece
crafted largely by hand. We use a special-
ized machinery process to create our hall-
mark carvings and each piece is constructed
and lacquered by hand. Our lacquering pro-
cess involves over a dozen steps to sand and
polish the furniture to achieve our glossy
finish. With proper care and assembly, your
Nurseryworks products will be a part of your
family for years to come. Please note that
due to the handcrafted nature of our prod-
ucts and our use of solid woods, each piece
is unique and may contain irregular qualities,
such as natural markings, miniscule burrs, or
slight discolorations. These natural character-
istics are inherent in wood, are not consid-
ered manufacturing defects and do not
merit replacements.

2
Maintenance and Cleaning:
Important Note:
Improper assembly can result in damage to
your furniture or cause harm to your child.
Proper assembly is critical to ensure a safe
and comfortable end result. Please read all
instructions before assembly and keep
instructions for future use.
Thank you for purchasing Nurseryworks. For
any questions or assistance, please contact
us at 323. 728. 8988, or via email at
[e-mail]. For additional infor-
mation on our Purchase Terms and Condi-
tions, please visit www.nurseryworks.net. Your
authorized Nurseryworks retailer will also be
happy to assist you.
To preserve the hand crafted quality of
Nurseryworks furniture, we recommend using
a cotton cloth and a non-toxic cleaner. Peri-
odic polishing or oiling on furniture pieces
that have a stain finish will help to maintain
the rich wood tones. Each Nurseryworks item
is a unique piece, made of White Pine, Pau-
lownia Wood and with rich and high quality
wood veneers. Because these pieces are
made of real wood and real wood veneers,
there will occasionally be natural markings,
miniscule burrs, or slight discolorations. These
natural characteristics are inherent in wood
and are not considered defects by Nursery-
works. Because of this the merchandise will
be considered normal and of good quality
and will not be replaced because of these
natural characteristics. Touch up kits are also
available upon request by contacting
Nurseryworks at:
323. 728. 8988 or [email protected].

Welcome to Nurseryworks Family Privileges
3
Nurseryworks products are made from sus-
tainable woods wherever possible and also
from high-quality wood veneers. The primary
material used in our products is Paulownia
wood which is harvested from plantations
and renewed every 10-12 years. Zero-grade
MDF, containing well below the regulated
limit of formaldehyde, is used sparingly in
components of our products to achieve our
signature carvings and single board slat cut-
outs. All paints, finishes and glues are low-
VOC. Our products are tested on a frequent
basis to ensure that all coatings and finishes
comply with U.S. and Canadian metals
requirements.
Each Nurseryworks product is a unique piece
crafted largely by hand. We use a special-
ized machinery process to create our hall-
mark carvings and each piece is constructed
and lacquered by hand. Our lacquering pro-
cess involves over a dozen steps to sand and
polish the furniture to achieve our glossy
finish. With proper care and assembly, your
Nurseryworks products will be a part of your
family for years to come. Please note that
due to the handcrafted nature of our prod-
ucts and our use of solid woods, each piece
is unique and may contain irregular qualities,
such as natural markings, miniscule burrs, or
slight discolorations. These natural character-
istics are inherent in wood, are not consid-
ered manufacturing defects and do not
merit replacements.
A sound savings plan that helps you furnish your futures, and your children’s rooms, for less.
Here’s how Family Privileges works:
When you are making purchases of Nursery-
works
furniture for more than one child, take ad-
vantage of a fast family privilege.
Take US$100 off any second crib or changing
table when making your Nurseryworks initial
purchase.*
And there’s more:
When the time comes to purchase from the
Nurseryworks kids’ furniture collection, simply
provide proof of your original Nurseryworks
purchase and take US$100 off your total pur-
chase.**
Nurseryworks stays a part of your family by
making sure your style budget doesn’t have
to expand when your family does.
That’s Nurseryworks Family Privileges.
* Products include the Aerial Crib, Loom
Crib,Studio Crib, Loom Changing Table, and
Two Wide Changing Table. Discount does not
apply to any toddler daybed conversion kits.
** Products include the Duet Bunk Bed and
Duet Twin Bed. Nurseryworks reserves the
right to change the terms of this offer based
on product availability.

WARNING
!
4
• Failure to follow these warnings and the
assembly instructions could result in serious
injury or death.
• Read all instructions before use of the
bookcase(s).
• Keep instructions for future use.
•TIP OVER HAZARD – DO NOT stack bookcases
or cubes more than 2 cubes high.
• Check this product for damaged hardware,
loose joints, missing parts or sharp edges
before and after assembly and frequently
during use. DO NOT assemble or use
bookcase(s) if any parts are missing, dam-
aged or broken. Contact Nurseryworks, Inc.
for replacement parts and instructional litera-
ture if needed. DO NOT substitute parts.
• Tighten all screws securely at each step of
the instructions. Check frequently to be cer-
tain they remain tight and secure.
• If refinishing, use a non-toxic finish specified
for children’s products.
• This product contains small parts. Keep small
parts out of children’s reach during assembly.
• Screws may have sharp edges or sharp
points. Keep screws out of the reach of chil-
dren at all times.
• Properly discard all packaging materials
after assembly is complete.
Improper assembly can result in damage to
your furniture or cause harm to your child.
Proper assembly is critical to ensure a safe
and comfortable end result. Please read all
instructions before assembly and keep
instructions for future use.
Thank you for purchasing Nurseryworks. For
any questions or assistance, please contact
us at 323. 728. 8988, or via email at
[e-mail]. For additional infor-
mation on our Purchase Terms and Condi-
tions, please visit www.nurseryworks.net. Your
authorized Nurseryworks retailer will also be
happy to assist you.

5
We will replace any missing parts at the time
of purchase or any defective item within a
one year period from the date of original pur-
chase. Please keep your receipt so that we
may process your warranty request. This war-
ranty only covers new units with original
packaging and ownership, and is not trans-
ferable. It does not cover any used, second-
hand or demo models.
This warranty does not cover any damaged
or defective parts that result from installation
and assembly, normal wear and tear, abuse,
negligence, improper use or alteration to the
finish, design, and hardware of the book-
case. The specific legal rights of this warranty
may vary from state to state. Some states do
not allow any exclusion or limitation of inci-
dental damages. Some States do not allow
limitation on how long an implied warranty
ONE YEAR LIMITED WARRANTY:
IF YOU WOULD LIKE TO ORDER REPLACEMENT
OR MISSING PARTS. PLEASE VISIT US AT:
WWW.NURSERYWORKS.NET
OR YOU CAN CONTACT US BY MAIL:
855 Washington Blvd. Montebello, CA 90640
Tel: [phone]
Fax: [phone]
Registering your product is even easier than
before. You can register your product on our
website at : www.nurseryworks.net

6
Wrench
Screw
(32mm/1.25”)
SINGLE BOOKCASE
Wood Dowel
(60mm/2.4”)
Bracket
Screw
(20mm/0.8”)
3
Please note that screw D requires a Phillips Head Screw driver which is not provided.

7
SINGLE BOOKCASE
Board
Cube
Platform
Be sure you follow the instructions in the order that they appear.
To avoid possible scratching, assemble furniture on a soft surface.
For instance on a carpet or blanket.
Be aware that you can use both ends of the Allen wrench.
For instance, use it lengthwise to get into tighter corners.
Be careful not to over tighten screws.

8
Single Bookcase
Assembly Instructions
Step 1
Parts Check
AScrew
(32mm/1.25”)
• Use 2 AScrews (32mm/1.25”) to fasten
Board to one Leg by inserting the
screws through the middle holes on both
ends of the board and the pre-drilled
holes of the leg.
• Repeat for other Board and Leg .
• 2 Screws per leg - total of 4 screws
• Tighten all screws with Allen wrench
before proceeding to the next step.

9
Step 2
Parts Check
AScrew
(32mm/1.25”)
• Have Platform positioned bottom up. Insert
4 AScrews (32mm/1.25”) through the holes of
Board (now attached to Leg ) and into
pre-drilled holes of Platform .
• Repeat with other Board and Leg.
• Total of 8 screws - 4 per board.
• Tighten all screws with Allen wrench before
proceeding to the next step.

10
Step 3
BACK of Bookcase
TOP of Bookcase
• Turn Platform over so that the
Legs are facing down.
• Place book case Cube down onto
Platform as indicated.

11
Step 4
• Insert DowelB(60mm/2.4”) into
pre-drilled holes on either side and
the back of the bookcase.
• Three holes/Dowels total - Insert
the Dowels far enough in so that they
are flush with the Bookcase.
• Attach 2 C Brackets by inserting
4 D(20mm/0.8”) screws through
each bracket and into the pre-drilled
holes on the back of the Bookcase
and platform.
• Tighten all screws with Allen
wrench.
BACK of Bookcase
TOP of Bookcase
Parts Check
BDowels
(60mm/2.4”)
CBrackets
D Screws
(20mm/0.8”)