Nurseryworks NOVELLA CRIB User manual

REVISED 04 APR 2018
NOVELLA CRIB
NW15001
Instruction Manual
Read allinstructions BEFORE assembly and USE of product.
KEEPINSTRUCTIONS FOR FUTURE USE.

- 02 -
Nursery Works is a purveyor of cutting-edge juvenile products. Created
for the ultra-chic, Nursery Works aims to bring high design into the
nursery. Our designers work, whenever possible, in close collaboration
with highly skilled American craftspeople to build each piece. Our
products are made in low production runs that allow us to employ
methods and materials that would be unavailable in typical mass
production. We take pride in presenting new materials to the children’s
industry that raise the bar in design, quality, and functionality for
parents and babies around the world.
THE PRODUCT AND MANUFACTURING PROCESS
With each product, Nursery Works strives to explore new materials
and processes, including non-toxic, recyclable acrylic, CNC-milled
maple, 24K gold-plated aluminum, custom marble/granite and
powder-coated stainless steel. In addition, many of our solid wood
cribs are bench-made in small local shops in the United States
using traditional joinery techniques that cannot be accomplished in
mass production. For other cribs, we employ precise CNC milling
that allows us to realize designs that were previously unimaginable.
This combination of the latest fabrication technology with tradition-
al techniques and our cutting-edge designs is unique to Nursery
Works. Low- and no-VOC finishes are used across all our products
and our products are tested to governmental standards on an
annual basis.
Please note that due to the handcrafted nature of our products and
our use of solid woods, each piece is unique and may possess
color variations and irregular wood grain or surface texture. These
natural characteristics are part of the beauty of real wood, are not
considered manufacturing defects and do not merit replacements.

- 03 -
MAINTENANCE AND CLEANING
To preserve the quality of your Nursery Works furniture we
recommend periodically wiping with a damp, lint-free cotton
cloth. Avoid getting the wood wet. Avoid furniture polish or clean-
ing sprays as they may change the sheen of the wood finish. Wood
expands and contracts with temperature and humidity. Avoid
placing the furniture in direct sunlight or near a heating or air
conditioning vent.
Touch up kits are available upon request by contacting Nursery
Works at: 323 728 8988 or (inf[email protected]).
IMPORTANTNOTE
Improper assembly can result in damage to your furniture or
cause harm to your child. Proper assembly is critical to ensure a
safe and comfortable end result. Please read all instructions
before assembly and keep instructions for future use.
Thank you for purchasing Nursery Works. For any questions or
assistance, please contact us at 323 728 8988, or via email at
[e-mail]. For additional information on our
Purchase Terms and Conditions, please visit
www.nurseryworks.net. Your authorized Nursery Works retailer
will also be happy to assist you.

- 04 -
READ ALL INSTRUCTIONS BEFORE ASSEMBLING CRIB.
KEEP THE MANUAL FOR FUTURE USE.
Failure to follow these warnings and
the assembly instructions could result
in serious injury or death.
Please read the caution and
warning statements insert before
using your crib.
TO AVOID DANGEROUS GAPS, ANY MATTRESS USED
IN THIS BED SHALL BE A FULL-SIZE CRIB MATTRESS
AT LEAST 51 5⁄8 IN. (1310 MM) IN LENGTH, 27 1⁄4 IN.
(690 MM) IN WIDTH, AND A MAX THICKNESS OF
6 IN. (150 MM).
WARNING
WARNING

- 05 -
Parents should ensure a safe environment for the child by
checking regularly, before placing the child in the product,
that every component is properly and securely in place.
• Do not use this crib if you cannot exactly follow the
accompanying instructions.
• Infants can suffocate on soft bedding. Never add a pillow or
comforter. Never place additional padding under an infant.
• To reduce the risk of SIDS, pediatricians recommend healthy
infants be placed on their backs to sleep, unless otherwise
advised by your physician.
• Strangulation Hazard: Strings can cause strangulation! Do not
place items with a string around a child’s neck, such as hood
strings or pacifier cords. Do not suspend strings over a crib or
attach strings to toys.
• To help prevent strangulation tighten all fasteners. A child can
trap parts of the body or clothing on loose fasteners.
• DO NOT place a crib near a window where cords from blinds
or drapes may strangle a child.
• Fall Hazard: When a child is able to pull to a standing position,
set the mattress to the lowest position and remove bumper pads,
large toys and other objects that could serve as steps for
climbing out.
• Do not use this crib if the child is able to climb out unaided or is
taller than 35 in. (89cm).
WARNING

- 06 -
• Check this product for damaged hardware, loose joints, loose
bolts or other fasteners, missing parts or sharp edges before
and after assembly and frequently during use. Securely tighten
loose bolts and other fasteners. DO NOT use crib if any parts
are missing, damaged or broken. Contact Nursery Works for
replacement parts and instructional literature if needed.
DO NOT substitute parts.
• DO NOT use a water mattress with this crib.
• For cribs equipped with teething rails, replace teething rail if
damaged, cracked or loose.
• If refinishing, use a non-toxic finish specified for children’s products.
• Never use plastic shipping bags or other plastic films as mattress
covers because they can cause suffocation.
• Infants can suffocate in gaps between crib sides when used with
a mattress that is too small.
• Follow warnings on all products in a crib.
• Ensure that the sides are properly latched or locked in place
when the crib is occupied.
• The mattress used with this crib should not be more than 15cm
thick and should be of such length with width that the gap
between the mattress and the sides of the crib is no more than
3cm when the mattress is pushed into the corner of the crib.
Please do NOT remove any wood screws
in the normal disassembly of the crib.
WARNING

- 07 -
ONE YEAR LIMITED WARRANTY
We will replace any missing parts at the time of purchase or any
defective item within a one year period from the date of original
purchase. Please keep your receipt so that we may process your
warranty request. This warranty only covers new units with original
packaging and ownership, and is not transferable. It does not
cover any used, secondhand or demo models.
This warranty does not cover any damaged or defective parts that
result from installation and assembly, normal wear and tear, abuse,
negligence, improper use or alteration to the finish, design, and
hardware of the crib. The specific legal rights of this warranty may
vary from state to state. Some states do not allow any exclusion
or limitation of incidental damages. Some states do not allow
limitation on how long an implied warranty lasts.
Registering your product is even easier than before! You can
register your product on our website at: www.nurseryworks.net.
IF YOU WOULD LIKE TO ORDER REPLACEMENT OR MISSING
PARTS, PLEASE VISIT US AT:
WWW.NURSERYWORKS.NET
OR CONTACT US BY MAIL:
855 Washington Blvd. Montebello, CA 90640
Tel: [phone] | Fax: [phone]

NOVELLA CRIB
Hardware and Tools List
- 08 -
Hardware & Tools Ref. No Description
A x 28 Hex Screw
(4.5 cm/1.75”)
Hex Screw
(1.5 cm/0.625”)
C x 18
B x 4 Hex Screw
(2.8 cm/1.125”)
D x 36 Washer
E x 36 Lock Washer
Bolt CapF x 4

NOVELLA CRIB
Hardware and Tools List
- 09 -
Hardware & Tools Ref. No Description
Hex WrenchG x 1
Wrench
(for bracket)
H x 1
J x 4 5/16” Washer
5/16” Lock
Washer
I x 4 5/16” Hex Screw
(4.5 cm/1.75”)
K x 4

- 10 -
NOVELLA CRIB
Parts List
Parts Ref. No Description
Crib End Top1 x 2
Crib Panel3 x 2
Crib End Bottom2 x 2

- 11 -
NOVELLA CRIB
Parts List
Parts Ref. No Description
Mattress Board4 x 1
Foot
7 x 4
Mattress Board
Bracket
5 x 4
Bottom
Support Rail
6 x 2

- 12 -
NOVELLA CRIB
Parts List
Parts Ref. No Description
• Be sure you follow the instructions in the order that they appear.
• To avoid possible scratching, assemble furniture on a soft
surface (like a carpet or blanket).
• Be aware that you can use both ends of the Hex wrench.
(For instance, use it lengthwise to get into tighter corners.)
• Be careful not to over tighten screws.
Daybed Post
8 x 2
Daybed Rail9 x 1
Guardrail
10 x 2

- 13 -
NOVELLA CRIB
Assembly Instructions
Step 1
You will need two people to assemble this crib
Identify two Bottom Support Rails and four Feet . Attach
four Feet to two Bottom Support Rails by using four
5/16” screws I, 5/16” lock washer Kand 5/16” washer J.
Do not overtighten screws.
6
7
7
6
I
6
7
7
7
7
6
X4
6
7
K
J

- 14 -
Step 2
6
3
3
6
Identify one Crib Panel and one Bottom Support Rail . Attach
the Bottom Support Rail to the Crib Panel by using four
screws A, lock washer Eand washer D.
Do not overtighten screws.
3
6X4
A
E
D
3
6

- 15 -
Step 3
Identify two Crib Ends & . Attach each Crib End & to
the Crib Panel by using two screws A, lock washer Eand
washer Deach.
Do not overtighten screws.
3
1 12 2
2
2
1
1
3
X8
2
2
 
1
3
A
E
D

- 16 -
Step 4
Attach Bottom Support Rail to Crib End Bottoms by
using two screws A, lock washer Eand washer D.
Do not overtighten screws.
2
6
2
2
6
AED

- 17 -
Step 5
Identify another Bottom Support Rail . Attach Bottom Support
Rail to Crib End Bottoms in same way as previous step.
Do not overtighten screws.
6
6
2
2
6
AE
D
2

- 18 -
Step 6
Choose a mattress height.
Identify four Mattress Board Brackets . Attach Mattress Board
Brackets to bottom of each Crib End as illustrated using one
screw Cand lock washer E.
Do not overtighten screws.
5
52
High Position
Middle Position
Low Position
2
2
5
5
5
5
C
2
5
E
X4

- 19 -
Step 7
FOR YOUR BABY’S SAFETY:
THIS CRIB IS SUPPLIED WITH EXTRA BOLTS THAT CLOSE HOLES
ACCESSIBLE TO YOUR BABY. FAILURE TO USE THESE BOLTS
COULD RESULT IN INJURY IF YOUR BABY’S FINGERS GET STUCK
IN THE HOLES. WE RECOMMEND THAT YOU USE THE BOLTS TO
CLOSE THE HOLES.
2
2
X4
C
2
C
High Position
Middle Position
Low Position

- 20 -
Step 8
45
Attach the Mattress Board on to the Mattress Board Brackets
by using four screws B, lock washers Eand bolt cap Fand eight
washers D.
Do not overtighten screws.
D
F
4
4
5
B
D E
X4
H