Nurseryworks sleepytime rocker User manual

SLEEPYTIME ROCKER
Instrucon Manual
Congratulations!
revised 29SEP2015
You are now the owner of a Nursery Works
product...a line of modern baby furniture that
redefines the nursery. Nursery Works’ products
are designed with both style and functionality
in mind, and we hope it becomes a source of
pleasure for you and your family. Quality mate-
rial, workmanship and pride have gone into
these products. Proper assembly is important
to ensure a safe and comfortable end result for
your baby. Please read all instructions before
assembly, and keep instructions for future use.

1
The Product and Manufacturing Process:
Nursery Works products are made from sus-
tainable woods wherever possible and also
from high-quality wood veneers. The primary
material used in our products is Paulownia
wood which is harvested from plantations
and renewed every 10-12 years. Zero-grade
MDF, containing well below the regulated
limit of formaldehyde, is used sparingly in
components of our products to achieve our
signature carvings and single board slat cut-
outs. All paints, finishes and glues are
low-VOC.
Each Nursery Works product is a unique piece
crafted largely by hand. We use a special-
ized machinery process to create our hall-
mark carvings and each piece is constructed
and lacquered by hand. Our lacquering pro-
cess involves over a dozen steps to sand and
polish the furniture to achieve our glossy
finish. With proper care and assembly, your
Nursery Works products will be a part of your
family for years to come. Please note that
due to the handcrafted nature of our prod-
ucts and our use of solid woods, each piece
is unique and may contain irregular qualities,
such as natural markings, miniscule burrs, or
slight discolorations. These natural character-
istics are inherent in wood, are not consid-
ered manufacturing defects and do not
merit replacements.

2
Maintenance and Cleaning:
To preserve the hand-crafted quality of Nurs-
ery Works furniture, we recommend using a
cotton cloth and a non-toxic cleaner. Period-
ic polishing or oiling on wood stains will help
to maintain the rich wood tones. For our
upholstered products, we recommend using
water to clean suede products and light
foam cleaner for all other fabrics.
If your child is teething, some furniture’s finish
may be affected. Be assured that our
low-VOC lacquers, finishes and glues comply
with applicable regulations and standards.
Touch up kits and replacement parts are
available for purchase upon request by
contacting Nursery Works at:
02 8064 2305 or [email protected]
Important Note:
Improper assembly can result in damage to
your furniture or cause harm to your child.
Proper assembly is critical to ensure a safe
and comfortable end result. Please read all
instructions before assembly and keep
instructions for future use.
Thank you for purchasing Nursery Works. For
any questions or assistance, please contact
us at 02 8064 2305, or via email at
[email protected]. For addi-
tional information on our Purchase Terms and
Conditions, pleasevisit www.nurseryworks.net.
Your authorized Nursery Works retailer will also
be happy to assist you.

WARNING
!
3
Nursery Works products are made from sus-
tainable woods wherever possible and also
from high-quality wood veneers. The primary
material used in our products is Paulownia
wood which is harvested from plantations
and renewed every 10-12 years. Zero-grade
MDF, containing well below the regulated
limit of formaldehyde, is used sparingly in
components of our products to achieve our
signature carvings and single board slat cut-
outs. All paints, finishes and glues are
low-VOC.
Each Nursery Works product is a unique piece
crafted largely by hand. We use a special-
ized machinery process to create our hall-
mark carvings and each piece is constructed
and lacquered by hand. Our lacquering pro-
cess involves over a dozen steps to sand and
polish the furniture to achieve our glossy
finish. With proper care and assembly, your
Nursery Works products will be a part of your
family for years to come. Please note that
due to the handcrafted nature of our prod-
ucts and our use of solid woods, each piece
is unique and may contain irregular qualities,
such as natural markings, miniscule burrs, or
slight discolorations. These natural character-
istics are inherent in wood, are not consid-
ered manufacturing defects and do not
merit replacements.
• Failure to follow these warnings and the
assembly instructions could result in serious
injury or death.
• Read all instructions before assembling this
product.
• Keep instructions for future use.
• FALL HAZARD – To prevent death or serious
injury, always keep child within arm’s reach.
• Check this product for damaged hardware,
loose joints, missing parts or sharp edges before
and after assembly and frequently during use.
DO NOT use this product if any parts are miss-
ing, damaged or broken. Contact Nursery-
works, Inc. for replacement parts and instruc-
tional literature if needed. DO NOT substitute
parts.
• Assembly tool required: Phillips screwdriver
(not included).
• Tighten all screws securely at each step of the
instructions. Check frequently to be certain
they remain tight and secure.
• If refinishing, use a non-toxic finish specified for
children’s products.
•This product contains small parts. Keep small
parts out of children’s reach during assembly.
•Properly discard all packaging materials after
assembly is complete.

4
Improper assembly can result in damage to
your furniture or cause harm to your child.
Proper assembly is critical to ensure a safe
and comfortable end result. Please read all
instructions before assembly and keep
instructions for future use.
Thank you for purchasing Nursery Works. For
any questions or assistance, please contact
us at 02 8064 2305, or via email at
[email protected]. For addi-
tional information on our Purchase Terms and
Conditions, pleasevisit www.nurseryworks.net.
Your authorized Nursery Works retailer will also
be happy to assist you.
We will replace any missing parts at the time
of purchase or any defective item within a
one year period from the date of original pur-
chase. Please keep your receipt so that we
may process your warranty request. This war-
ranty only covers new units with original
packaging and ownership, and is not trans-
ferable. It does not cover any used, second-
hand or demo models.
This warranty does not cover any damaged
or defective parts that result from installation
and assembly, normal wear and tear, abuse,
negligence, improper use or alteration to the
finish, design, and hardware of the rocker.
The specific legal rights of this warranty may
vary from state to state. Some states do not
allow any exclusion or limitation of incidental
damages. Some States do not allow limita-
tion on how long an implied warranty lasts.
ONE YEAR LIMITED WARRANTY:
IF YOU WOULD LIKE TO ORDER REPLACEMENT
OR MISSING PARTS. PLEASE VISIT US AT:
WWW.NURSERYWORKS.NET
OR YOU CAN CONTACT US B Y MAIL:
Registering your product is even easier than
before. You can register your product on our
website at : www.nurseryworks.net
PO BOX 296, Earlwood, NSW 2206, Australia
ABN:73 131 269 988
Tel: [phone]
Fax: [phone]

5
SLEEPYTIME ROCKER
Hardware and Tools List
A x 8
B x 8
C x 8
D x 8
F x 4
G x 4
H x 1
Screw
(70mm/2.75”)
Dowel
(40mm/1.6”)
Washer
Spring Washer
Cam Lock
Cam Bolt
Allen Wrench
Please note that cam lock F and cam bolt G requires
a Phillips Head Screw driver which is not provided.
Ref. No DescriptionHardware & Tools

6
front back
Be sure you follow the instructions in the order that they appear.
To avoid possible scratching, assemble furniture on a soft surface.
For instance on a carpet or blanket.
Be aware that you can use both ends of the Allen wrench.
For instance, use it lengthwise to get into tighter corners.
Be careful not to over tighten screws.
Rear Leg
Cross Bar
Front Leg
Cross Bar
Leg
Chair
x1
x1
Parts List
Ref. No DescriptionParts
SLEEPYTIME ROCKER
Ax2
Ax1

7
Rocker legs are stored
under the seat cushion.

8
Sleepytime Rocker
Assembly Instructions
Step 1
Insert four Dowels Binto the pre-drilled holes of the
Front Leg Cross Bar and the Rear Leg Cross Bar .
Total of 8 Dowels. Insert Cam Locks F into the pre-drilled
holes as indicated.
F X 2
F X 2

9
Insert the Cam Bolt G into the middle holes of the
leg .
Repeat the same procedure for the other leg.
Step 2
front back
front
back
A
A
A

10
Step 3
Connect the Front Leg Cross Bar and Rear Leg Cross
Bar with the 2 legs by inserting the dowels of the
cross bars into the pre-drilled holes of the 2 legs.
AA

Step 4
Use a screw driver and turn the Cam Locks F 90
degrees clock wise.
* Rotate F
clockwise
to secure.
A
A
11

Step 5
Put the Spring Washer D into Screw A and then
followed by Washer C. Repeat the same procedures
for all 8 Screws A.
12

Step 6
Connect the Legs to the wooden frame of the
rocker by inserting Screws A into the pre-inserted nuts
of the wooden frame and screw them tightly using
the Allen Wrench H. Repeat the same procedures for
4 corners.
A X 8
A
A
A
A
13

Step 7
Assembly is complete.
14