Nurseryworks NOVELLA User manual

REVISED 16 MAR 2018
NOVELLA 6-DRAWER
DRESSER
NW15026
Instruction Manual
Read all instructions BEFORE assembly and USE of product.
KEEP INSTRUCTIONS FOR FUTURE USE.

- 02 -
Nursery Works is a purveyor of cutting-edge juvenile products. Created
for the ultra-chic, Nursery Works aims to bring high design into the
nursery. Our designers work, whenever possible, in close collaboration
with highly skilled American craftspeople to build each piece. Our
products are made in low production runs that allow us to employ
methods and materials that would be unavailable in typical mass
production. We take pride in presenting new materials to the children’s
industry that raise the bar in design, quality, and functionality for
parents and babies around the world.
THE PRODUCT AND MANUFACTURING PROCESS
With each product, Nursery Works strives to explore new materials
and processes, including non-toxic, recyclable acrylic, CNC-milled
maple, 24K gold-plated aluminum, custom marble/granite and
powder-coated stainless steel. In addition, many of our solid wood
cribs are bench-made in small local shops in the United States
using traditional joinery techniques that cannot be accomplished in
mass production. For other cribs, we employ precise CNC milling
that allows us to realize designs that were previously unimaginable.
This combination of the latest fabrication technology with tradition-
al techniques and our cutting-edge designs is unique to Nursery
Works. Low- and no-VOC finishes are used across all our products
and our products are tested to governmental standards on an
annual basis.
Please note that due to the handcrafted nature of our products and
our use of solid woods, each piece is unique and may possess
color variations and irregular wood grain or surface texture. These
natural characteristics are part of the beauty of real wood, are not
considered manufacturing defects and do not merit replacements.

- 03 -
MAINTENANCE AND CLEANING
To preserve the quality of your Nursery Works furniture we
recommend periodically wiping with a damp, lint-free cotton
cloth. Avoid getting the wood wet. Avoid furniture polish or clean-
ing sprays as they may change the sheen of the wood finish. Wood
expands and contracts with temperature and humidity. Avoid
placing the furniture in direct sunlight or near a heating or air
conditioning vent.
Touch up kits are available upon request by contacting Nursery
Works at: 323 728 8988 or ([e-mail]).
IMPORTANTNOTE
Improper assembly can result in damage to your furniture or
cause harm to your child. Proper assembly is critical to ensure a
safe and comfortable end result. Please read all instructions
before assembly and keep instructions for future use.
Thank you for purchasing Nursery Works. For any questions or
assistance, please contact us at 323 728 8988, or via email at
[e-mail]. For additional information on our
Purchase Terms and Conditions, please visit
www.nurseryworks.net. Your authorized Nursery Works retailer
will also be happy to assist you.

- 04 -
ONE YEAR LIMITED WARRANTY
We will replace any missing parts at the time of purchase or any
defective item within a one year period from the date of original
purchase. Please keep your receipt so that we may process your
warranty request. This warranty only covers new units with original
packaging and ownership, and is not transferable. It does not
cover any used, secondhand or demo models.
This warranty does not cover any damaged or defective parts that
result from installation and assembly, normal wear and tear, abuse,
negligence, improper use or alteration to the finish, design, and
hardware of the product. The specific legal rights of this warranty
may vary from state to state. Some states do not allow any
exclusion or limitation of incidental damages. Some states do not
allow limitation on how long an implied warranty lasts.
Registering your product is even easier than before! You can
register your product on our website at: www.nurseryworks.net.
IF YOU WOULD LIKE TO ORDER REPLACEMENT OR MISSING
PARTS, PLEASE VISIT US AT:
WWW.NURSERYWORKS.NET/PARTS
OR CONTACT US BY MAIL:
855 Washington Blvd. Montebello, CA 90640
Tel: [phone]

- 05 -
NOVELLA 6-DRAWER
DRESSER
Hardware and Tools List
Hardware & Tools Ref. No Description
Please note that the screws require a Phillips head screw driver
which is not provided.
1-1/4”
Wood Screw
A
x 16
Anti Tip
Safety Kit
B
x 1
Bracket x 2
Safety Strap x 2
1-1/2” Wood Screw x 2
3/4” Wood Screw x 2

- 06 -
NOVELLA 6-DRAWER
DRESSER
Parts List
Hardware & Tools Ref. No Description
Dresser
Body
1 x 1
Metal
Brace
2 x 4
• Be sure you follow the instructions in the order that they appear.
• To avoid possible scratching, assemble furniture on a soft surface.
For instance on a carpet or blanket.
• Be careful not to over tighten screws.
Foot3 x 4
Middle
support
4 x 1

- 07 -
NOVELLA 6-DRAWER
DRESSER
Assembly Instructions
Step 1
2
2
2
2
1
A
AA
A
2

- 08 -
Step 2
3
3
3
3
1
3
2

- 09 -
Step 3
4
4
1
* Optional if you intend to put a lot of weight in the dresser.

- 10 -
Step 4
FURNITURE ANTI-TIPPING
KIT INSTALLATION
Serious or fatal crushing can occur when furniture tips over on
children. To help prevent tip-over, follow the steps below to
install this anti-tipping strap.
Tools Needed
(not included)
Phillips
screwdriver
WARNING
Serious or fatal crushing injuries
can occur from furniture tip-over.
To help prevent tip-over:
Use of tip-over restraints may
only reduce, but not eliminate,
the risk of tip-over.
This is a permanent label.
Do not remove!
Install tipover restraint provided.
Place heaviest items in the lowest
drawers.
Do not set TVs or other heavy
objects on top of this product,
unless the product is specifically
designed to accommodate them.
Never allow children to climb or
hang on drawers, doors, or
shelves.
Never open more than one
drawer at a time.
(OR)
Do not defeat or remove the
drawer interlock system.

- 11 -
4a
4b
Attach bracket to the wall with
the 1-1/2" wood screws provided:
It is recommended that you locate a wall
stud behind the furniture unit. If the wall
stud is not used, a suitable "Hollow-Wall
used in lieu of the wall stud.
Position the wall bracket on the stud
about 1" below the top the furniture piece.
Mark the position for the bracket
placement on the wall and drill a pilot
hole into the stud.
Attach the bracket to the wall with the
1-1/2" screws provided.
Anchor Bolt" (not provided) should be
..
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Wall Stud Wallboard
Bracket
Support
To attach a bracket to the Furniture
Frame below to top with the short
screws provide:
Move the furniture piece temporarily to its
.
finalpositiontothewall.
Mark the location of the bracket on the back
of the furniture in relation to the
previously mounted wall bracket.
Move the furniture piece away from the wall
mounted bracket and place the other
bracket on the mark position on the back of
the furniture piece.
Drillapilotholeasshowninthefigureor
.
.
.
.
Caution:
into the back furniture frame.
Make sure you do not drill
completely through the back
of the furniture.
Attach the bracket to the back of the
furniture with the 3/4" screws provided.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.Furniture Top

- 12 -
4c
To Attach the safety straps:
Move the furniture back to its final position.
Thread 2 safety straps through both of the
mounted brackets as shown in the illustration.
Tighten the straps.
Do not over tighten.
.
.
.
.
Furniture Top
Wallboard

- 13 -
IMPORTANT
Make sure the brackets are securely attached to the wall stud
and furniture frame, and the safety straps are tightened.
WARNING
This product should not be a substitute for proper parental
supervision which is the only proper deterrent to prevent improp-
er use of this unit. The manufacturer assumes no liability for
improper installation or excessive loads placed on the safety
straps, bracket or mounting screws. This hardware will not insure
against tipping.
NOTE
For taller or heavier pieces of furniture, two safety brackets
might be installed.
PLEASE READ
DO NOT USE THE DRESSER IF IT IS DAMAGED OR BROKEN.

- 14 -
Assembly is complete.
CHANGER TRAY IS NOT INCLUDED, SOLD SEPARATELY. CHANGER
TRAY M0219 OR M0619 MADE BY THE MDB FAMILY IS
RECOMMENDED.
READ ALL INSTRUCTIONS BEFORE USING THE PRODUCT. KEEP
THIS MANUAL IN A SAFE PLACE FOR FUTURE REFERENCE.
Recheck all screws and bolts to be sure they are fastened
securely. Do not overtighten.
Step 5

NOVELLA 6-DRAWER
DRESSER
How to remove dividers in top drawers
Step 1
- 15 -
Pull the drawer out. Locate orange lever under bottom of drawer
(towards the front). Squeeze the orange levers out to the sides of
the drawer and lift up front of drawer and remove.
Orange
lever
!

Step 2
- 16 -
Take out the dividers inside the drawer.

Step 3
- 17 -
Replace the drawer box by pulling drawer glides all the way out
and locating L-shaped hook. Place drawer box on extended glide,
lining up L-shaped hook with hole in back of drawer box.
L-shaped
hook

Step 4
- 18 -
Set drawer box down on glide. Push drawer box back and pull
glide forward so it engages the orange clip.
Assembly is complete.
Orange
lever

WWW.NURSERYWORKS.NET