Nutri Ninja BL580UKV User manual

Please make sure to read the enclosed Ninja® Instructions prior to using your unit.
Dishwasher: The containers, lids, and
blade assemblies are all dishwasher safe.
The lids and blade assemblies are top-
rack dishwasher safe. Ensure the blade
assemblies are removed from the containers
before placing in the dishwasher.
Hand-washing: Wash containers, lids, and
blade assemblies in warm, soapy water.
When washing the blade assemblies, use a
dishwashing utensil with a handle to avoid
direct hand contact with blades. Handle blade
assemblies with care to avoid contact with
sharp edges. Rinse and air-dry thoroughly.
QUESTIONS? We’re here to help. Call 0800 862 0453 or visit ninjakitchen.eu
NUTRI NINJA® WITH FRESHVAC™ TECHNOLOGY
SMOOTHIE
EXTRACT
CLEANING
SMOOTHIE
Fresh/Frozen Fruits
Milk/ Yogurt
Protein Shakes
EXTRACT
Whole Fruits/Vegetables
Fibrous Ingredients
Seeds
BL580UKV_QSG_MP_180711_MV1BL580UKV_QSG_MP_180711_MV1
WARNING: Handle the blade assemblies with care when washing, as the blades are
sharp. Contact with the blades’ edges can result in laceration.
WARNING: Always unplug the base before cleaning.
AUTO-IQ® PROGRAMS FOR THE SINGLE-SERVE CUP
Intelligent pre-set programs combine unique blending and pausing patterns
that do the work for you. Once a pre-set program is selected, it will start
immediately. Press the selected program again to pause it.
Please make sure to read the enclosed Ninja® Instructions prior to using your unit.
QUICK
START
GUIDE

WARNING: Handle the Pro Extractor Blades Assembly with care, as the blades are sharp.
AS S E M B LY
BLEND & ENJOY
SINGLE-SERVE FRESHVAC™ CUP
QUESTIONS? We’re here to help. Call 0800 862 0453 or visit ninjakitchen.eu
PARTS
WARNING: Handle the blade assemblies with care when washing, as the blades are
sharp. Contact with the blades’ edges can result in laceration.
QUESTIONS? We’re here to help. Call 0800 862 0453 or visit ninjakitchen.eu
5. To release the pump from the cup, press
the pump release button on the bottom
front of the pump and lift. Click the Flip &
Seal Lid closed.
1 Fill the cup as desired
and assemble the
Pro Extractor Blades®
Assembly on top of
the cup.
3 Open the Flip & Seal Lid by
pressing and lifting the latch.
Set the FreshVac™ Pump on
top of the FreshVac™ Tab.
The pump DOES NOT lock
into place on the lid.
4 Press the power button on top of the pump
to begin vacuum sealing. The pump will
shut off automatically once vacuum sealing
is complete.
2 Turn cup upside down so
the Flip & Seal Lid is on top
and the bottom of the blade
assembly is flat on
the counter.
7 Gently pull up on
the FreshVac™
tab to release the
vacuum, then close
the Flip & Seal Lid.
8 Remove the Pro
Extractor Blades
Assembly and
screw the spout
lid clockwise onto
the cup.
6 Lock cup in place
on base and blend
as desired. Once
blending is complete,
remove the cup from
the base and place
the cup flat on
the counter.
VACUUM BLENDING WITH
THE SINGLE-SERVE FRESHVAC™ CUP
1 Fill Single-Serve Cup
with desired contents.
2 Place Pro Extractor
Blades® Assembly
on cup and rotate
clockwise until
tightly sealed.
1 Select any of
the illuminated
programs to
begin blending.
3 Flip cup
upside down
and lower
it onto base.
2 When blending is
complete, turn cup
counterclockwise
and lift to remove.
4 Turn cup
clockwise
to lock
in place.
3 Turn blade
assembly
counterclockwise
to remove.
4 Place spout lid on
top of cup and turn
clockwise to lock
in place.
SINGLE-SERVE
FRESHVAC™ CUP
SPOUT
LID
PRO EXTRACTOR
BLADES® ASSEMBLY
FRESHVAC™
PUMP
FRESHVAC™
TAB
WITH FLIP
& SEAL LID