NUTRICHEF NCIT2S User manual

PortableSingleBurnerInductionCooktop
NCIT2S
ElectronicPlug-inFlamelessBurnerDesign
withDigitalDisplay,AutoShutOffFunction

www.NutrichefKitchen.com2
Please read all the instructions carefully before using the appliance
Table of Contents
Safety and Warranty
Induction Technology
Parts Identication
Operation
Selection of Cookware
Maintenance
Troubleshooting
Technical Specications
Safety and Warranty
1. Do not place the unit near re or gas or any hot environment in order to avoid
damages or malfunction.
2. To reduce the risk and damage, the plug should be t into an individual outlet
and the rated electrical current should be not less than 16A.
3. Place the unit on a level and dry surface. Ensure there is a minimum free area
of at least 10cm surrounding the unit on all sides.
4. Do not immerse the appliance or electric cord in water or any other liquid.
5. Do not allow any liquid to enter the unit’s cabinet. This will damage the inner
electrical parts.
6. Ensure the power code is removed from the power socket before cleaning.
7. Do not cover the air vent with anything during cooking.
8. Before heating any tinned food please uncap its cover.
9. Do not place any metallic accessories like spoon, ladles etc on the cooktop while
cooking in order to avoid heating. It is advisable to keep even non-metallic
objects at least 10cm away from the unit while it is in use.
10. Do not cook with an empty pot. It may cause malfunction or pose danger.
11. If power cord gets damaged, please ensure you replace it only with a
manufacturer recommended cord.
12. If the unit is not working for some reason even after basic troubleshooting by
you, please immediately contact with our service points. Do not attempt to
open the unit by yourself as it may be dangerous.
2
3
4
4
5
5
6
7

www.NutrichefKitchen.com 3
13. Always clean the unit to avoid dirt going into the fan. This will aect its normal
functioning.
14. Do not touch the plate while the unit is working, it may cause burns.
15. Users with cardiac pacemakers are advised to consult their doctors before
using this product.
16. Do not place the unit on or near a gas stove.
17. Do not place any inammable item like paper, cloth or other such articles
under the unit. It may cause a re hazard.
18. Do not place the unit on a cloth or carpet etc. This may block the air vent and
be of danger to the unit and the user.
19. Avoid hitting the plate of the unit as it may crack or break the unit. In case
you spot any cracks on the cooktop surface, turn o the unit and remove the
cord from the electric outlet immediately and contact the service centers.
20. Do not touch the control panel with any sharp objects.
Induction Technology
When the power connection is ON, the electric current will produce a magnetic
eld in the induction coil, which is embedded in the machine. As soon as the
magnetic force lines in the magnetic eld touch the alloy steel pot/boiler, it will
produce a heating eect, which then heats the good in the saucepan or pot.
Panel
Eddy current
Electric eld Coil produce electromagnetic

www.NutrichefKitchen.com4
Parts Identication
1. Black Crystal Plate
2. Heating Area
3. LED Screen
4. ON/OFF
5. Decrease Button
6. Increase Button
Operation
1. Basic Operation
• Insert the plug into AC 120V~, 60Hz Socket
• Place induction compatible cooking utensils in the center of the cooktop plate.
• Press ON/OFF button to power the unit on. The LED screen displays “ON”, then
press “+” or “-” . The default temperature 300°F will auto select, dierent Level,
setting and adjustments
• To power o the unit, press the ON/OFF button again.
• Remove the plug from the socket if the unit is not going to be used for a long
time.
2. Cooking Mode
Cooking Mode
• There is 1 cooking mode: Temperature
Temperature
• Press the [+] or [-] button, the display will show the default temperature of 300°F
• The temperature can be adjusted by the [+] and [-] buttons through the range
of 140°F, 160°F, 180°F, 200°F, 220°F, 240°F, 260°F, 280°F, 300°F, 320°F, 340°F, 360°F,
380°F, 400°F, 420°F, 440°F, 460°F.

www.NutrichefKitchen.com 5
• Once cooking is nished, press the [ON/OFF] button to turn o the induction
cooker.
• The induction cooker will turn o automatically after 2 hours if no other
function button is pressed.
Selection of Cookware
1. Material Required: Please use only induction compatible cookware made of
steel, cast iron, enameled iron, stainless steel, at-bottom pans/pots with
diameter from 12 to 26cm
2. Pans/Pots/Utensils should have a at surface. Do not try to use any other kind
of utensils or vessels (especially pressure sensor vessels)
3. While buying your cookware, look for an “Induction Compatible” sign or
wording to ensure it will work with this cooktop.
Maintenance and Daily Care
1. Keep the unit clean at all times. Avoid dirt getting into the fan or other inner
parts of the Unit.
2. Before starting to clean the Unit, ensure the Unit is powered o and remove the
power plug from socket. Do not clean the Unit until the surface cools down.
3. Remove grease, dirt, stains etc by cleaning the Unit with a clean soft cloth and
mild detergent.
4. The fan in the air vent of the Unit is bound to get dirt stuck on it. Please remove
it regularly with a soft brush or cotton stick.
5. Do not immerse the Unit or power cord directly into water or any other liquid
to clean it. It will damage the Unit. To protect the Unit from any kind of power
surge, ensure the plug is t properly into the socket.
6. Do not pull out the power cord directly during operation. To extend the
appliance’s life, press the“ON/OFF” button rst, then unplug the power cord
from the socket.
7. The fan will run to cool the heating plate even after the Unit is powered o.
It is better to remove the plug after the fan stops working.
8. When not using the Unit for a long time, remove the plug from the socket.
9. Some models will have structural design to prevent cockroaches from entering
inside the Unit. If needed, you can use mothball or equivalent cockroach
repellent to protect the Unit.

www.NutrichefKitchen.com6
Troubleshooting and Treatment
During operations, if there is any error, please check the following table for
common troubleshooting options before calling for service. Below are common
errors and the checks to perform
After connecting the power
and pressing the “Power”
key, the appliance has no
response
Is there power supply in the
outlet?
Use after resuming the
electricity
Is there plug connected rmly? Check the root cause
carefully. If the problem can’t
be xed, please contact
service center for checking
and repairs.
Is the fuse broken down?
Induction Cooker sends out
“Beep” Sound
Has a cookware been placed on the
surface? Is the cookware induction
compatible?
Place cookware. Check if the
cookware is induction
compatible.
Is the cookware placed on the
center of the heating zone?
Place the cookware at the
center of dened heating
zone
Is the cookware bigger than 12cm? Use cookware with diameter
within 12-26cm
No Operation during the
heating being in use
Is the cookware empty or the
temperature too high?
Please check whether the
appliance is being misused
Is the air intake/exhaust vent
clogged or dirt has accumulated
Remove the dirt clogging
the air intake/exhaust vent.
Operate the appliance again
after cooling down.
Is the cooker working over 2 hours
without any external instruction?
Reset cooking modes or use
timer function
Without Cookware or Incompatible
cookware used
When showing error signal
E0, E3, E5, please check
whether the cookware is
induction compatible or not?
Or switch on the appliance
again after it is cooled down
naturally. When Show E1, E2,
E4, E6, please contact service
center for checking and
repairs
Error codes occur E0
Low-Voltage
Error codes occur E1
High-Voltage
Error codes occur E2
Top plate Overheat
Error codes occur E3
Top Plate Sensor Open Circuit
Error codes occur E4
IGBT Overheat
Error codes occur E5
Top Plate Sensor Short CircuitError codes occur E6
ERROR SCENARIO CHECK POINTS REMEDY

www.NutrichefKitchen.com 7
Features:
• Ceramic Tempered Glass Induction Cooktop
• Simple Electronic Plug-in Flameless Burner Design
• Circular Top Panel Heating Zones
• Congurable Temperature Zone Setting from 140°F-460°F in 17 Level
• High-Powered Heating Elements
• Quickly Heats for Instant Food Prep
• Digital LCD Display Screens
• Sensor Touch Controls
• Stain-Resistant & Easy-to-Clean
• Compact & Space-Saving Style
• Energy Ecient: Low Power Consumption
• Safety Certied & Approved
• Without Pot
• For Use with All of Your Steel Kitchen Cookware, Pots & Pans
What's in the Box:
• Single Burner Induction Cooktop
Technical Specs:
• Heating Element Power: 1500W
• Circular Heat Zone Diameter:6.7’’ -inches
• Adjustable Temperature Controls: 140°F - 460°F (60°C – 237.8°C)
• Construction Materials: Top Body (ABS) + Bottom Body (PP)
• Tempered Ceramic Glass (Crystal Plate)
• Power Cord Length: 4.9’ ft
• Power: 120V/60Hz
• Plate Size: 10.23'' -inches
• Power Cable Type: USA Plug
• Product Dimensions (L x W x H): 11.1’’ x 12.24’ x 2.83’’ –inches
This product can expose you to a chemical or group of chemicals, which may include
“Cadmium (Cd)” which is known in the state of California to cause cancer, birth defects,
or other reproductive harm. For more info, go to https://www.p65warnings.ca.gov/.

Questions? Issues?
We are here to help!
Phone: [phone]
Email: suppor[email protected]