www.NutrichefKitchen.com 4
Before the First Use
Before the rst using, please clean the heating plate with warm cloth; wash
the egg tray, egg bowl and the lid with warm soapy water. Wipe them dry
completely when you are done.
Using the Steamer Function
Boiled Eggs
• 8 eggs can be cooked at the same time.
1. Use the measuring cup to pour water onto the steam plate.
The water level cannot go over the maximum level on the scale.
2. Poking a hole in the eggs, which could prevent the eggs from bursting
when heated.
3. Place the egg tray onto the metal container and note that the bigger side
should be placed on the egg tray (1).
4. Put the transparent lid on the appliance.
5. Put the plug into 120V~ power sourcing.
6. Turn the ON-OFF control to the position of “Heat”, the indicate light is on,
then the steamer start to heat. The heating function will cut o
automatically when the eggs are cooked thoroughly, and it will give out
beep. At that time, you can turn the control knob to the position of “OFF”.
Then remove the eggs from the steam and cool them minutes, you can
enjoy it. If you want it kept warm, then let them in the steamer, and turn
the knob to the position of “keep warm”, it will keep warm automatically.
Then you can enjoy it whenever you want.
Measuring Cup
Using this measuring cup to get and pour water into the heating plate.
Attention:
The water level should never pass the maximum capacity of the heating
plate.
